This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):
```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";
// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```
That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.
The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.
A few alternatives considered were:
- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This uses each vector's size as a barrier between lists, to eliminate
the possibility of incidental collisions between entries of different
lists. This is the same as is done inside `AddBlock`.
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
Suggested by zygoloid while looking at #5678
```
CHECK failure at toolchain/lower/context.cpp:62: !llvm::verifyModule(*llvm_module_, &errs): Verifier errors: Instruction does not dominate all uses!
%.loc17_46.1.temp = alloca { i1, i32, i32 }, align 8, !dbg !13
%tuple.elem0.loc17_46.2.tuple.elem = getelementptr inbounds nuw { i1, i32, i32 }, ptr %.loc17_46.1.temp, i32 0, i32 0, !dbg !13
Instruction does not dominate all uses!
%.loc17_46.1.temp = alloca { i1, i32, i32 }, align 8, !dbg !13
%tuple.elem1.loc17_46.2.tuple.elem = getelementptr inbounds nuw { i1, i32, i32 }, ptr %.loc17_46.1.temp, i32 0, i32 1, !dbg !13
Instruction does not dominate all uses!
%.loc17_46.1.temp = alloca { i1, i32, i32 }, align 8, !dbg !13
%tuple.elem2.loc17_46.2.tuple.elem = getelementptr inbounds nuw { i1, i32, i32 }, ptr %.loc17_46.1.temp, i32 0, i32 2, !dbg !13
```
Adds a `--llvm-verifier` flag to be able to turn this off easily,
particularly for debugging the LLVM IR.
The call workaround is due to a verifier requirement `inlinable function
call in a function with debug info must have a !dbg location`. It
specifically comes up for the `++x` case, with `%1 = call i32
@"_CConvert.8b3d5d6a6c17be04:ImplicitAs.Core.b88d1103f417c6d4"(i32
%other)`. I think #5397 is in the direction of a fix for that, but #5397
was set aside because it puts the debug info in too many places.
Instead, address this by adding a stub location for calls that don't
have a good location. I'm deliberately putting this next to the TODO so
that it's easier to understand the association.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Previously we created allocas for temporaries at whatever point in the
output LLVM function we'd reached. This would result in these being
dynamic allocas (performing a dynamic stack allocation), which is
inefficent and can lead to a stack overflow if it happens in a loop.
Switch to putting the allocas in the entry block instead, and instead
generate a lifetime start marker when we reach the point where the
temporary is introduced. We already did this for local variables; this
is just factoring out and reusing that code.
Adds min-preludes to a few more slowest tests, and adds them to most of
the lowering tests, with a few exceptions that make use of operators.
This take the runtime of file_test down from about 8s to about 7s on my
machine.
We add support for Negate on uints in the min-preludes.
This preserves the constant values of the arguments to the thunk, which
is important if the thunk requires conversion of an `IntLiteral` to some
other type. This should become unnecessary once we have form support,
but avoiding the indirection through a thunk function seems valuable
even once that support is in place.
To support this, track whether a function is a thunk on the Function
object, and if so, what the callee of the thunk is. This information is
also included in formatted SemIR when dumping the thunk.
Build a `SpecificConstant` (if needed) and `NameRef` instruction when
referencing the thunk target from a thunk. The former is necessary if
the impl is generic in order to call the right version of the thunk
target. This previously caused a crash in lowering.
Also add some more check testing for the interaction of thunks and
generics. This testing uncovered an unrelated bug with thunks for
generic interface functions for which I've added a TODO.
If a function contains instructions whose locations are in another file,
skip providing debug locations for those instructions rather than
CHECK-failing.
This happens when emitting a thunk where the signature is declared in
one file and the call target is in another file: some parts of the thunk
use the original signature as their locations, whereas other parts of it
use the location of the call target.
While we don't need a lookup table for an imported impl from a different
library, we do still need to import the name scope so we can compute the
parent scope for mangling purposes.
This seems to be enough to avoid naming collisions for functions in any
of the current test cases (verified by asserting that the name of the
`llvm::Function` matches the name passed to create it - not triggering
LLVM's numbering that happens when names collide)
It currently implements mangling for namespace scopes, class scopes, and
impls.
Nothing generic is mangled yet - haven't looked at how that works,
though evidently it's not covered by existing testing, I guess.
Follow-up change will document the current mangling algorithm in
`toolchain/docs/lower.md`
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
There's not much mangling happening yet - but Run -> main (and some
overloading numbering happening, maybe LLVM is doing that 'helpfully'
under the hood?) is enough to demonstrate this improvement/fix.
Ah, here it is:
```
#0 llvm::ValueSymbolTable::makeUniqueName (this=0x50287fe5b6c0, V=0x50287fe827e8, UniqueName="F") at external/_main~llvm_project~llvm-project/llvm/lib/IR/ValueSymbolTable.cpp:45
#1 0x000055555c40f964 in llvm::ValueSymbolTable::reinsertValue (this=0x50287fe5b6c0, V=0x50287fe827e8) at external/_main~llvm_project~llvm-project/llvm/lib/IR/ValueSymbolTable.cpp:100
#2 0x000055555c2a91df in llvm::SymbolTableListTraits<llvm::Function>::addNodeToList (this=0x50287fd16f18, V=0x50287fe827e8) at external/_main~llvm_project~llvm-project/llvm/lib/IR/SymbolTableListTraitsImpl.h:75
#3 0x000055555c2a90e5 in llvm::iplist_impl<llvm::simple_ilist<llvm::Function>, llvm::SymbolTableListTraits<llvm::Function> >::insert (this=0x50287fd16f18, where=..., New=0x50287fe827e8)
at external/_main~llvm_project~llvm-project/llvm/include/llvm/ADT/ilist.h:166
#4 0x000055555c27fef2 in llvm::iplist_impl<llvm::simple_ilist<llvm::Function>, llvm::SymbolTableListTraits<llvm::Function> >::push_back (this=0x50287fd16f18, val=0x50287fe827e8) at external/_main~llvm_project~llvm-project/llvm/include/llvm/ADT/ilist.h:250
#5 0x000055555c27faeb in llvm::Function::Function (this=0x50287fe827e8, Ty=0x50287fd43058, Linkage=llvm::GlobalValue::ExternalLinkage, AddrSpace=0, name="F", ParentModule=0x50287fd16f00) at external/_main~llvm_project~llvm-project/llvm/lib/IR/Function.cpp:521
#6 0x0000555559441f95 in llvm::Function::Create (Ty=0x50287fd43058, Linkage=llvm::GlobalValue::ExternalLinkage, AddrSpace=0, N="F", M=0x50287fd16f00) at external/_main~llvm_project~llvm-project/llvm/include/llvm/IR/Function.h:175
#7 0x000055555c27ebac in llvm::Function::Create (Ty=0x50287fd43058, Linkage=llvm::GlobalValue::ExternalLinkage, N="F", M=...) at external/_main~llvm_project~llvm-project/llvm/lib/IR/Function.cpp:398
#8 0x0000555558ce7bb5 in Carbon::Lower::FileContext::BuildFunctionDecl (this=0x7fffffffc438, function_id=...) at toolchain/lower/file_context.cpp:257
```
That's where LLVM decides to make a new name (name.number) when asked to
create a new global with the same name as an existing global.
It's not a valid mangling scheme - since the name won't be stable
between different compilations, but it is enough to make
single-compilation code build/run for now.
Seems to work with lldb ( https://pastebin.com/igKkNECm ), though gdb
has /some/ trouble with the paths (they aren't complete - just using the
filename directly, not providing the working directory - might be some
quick hacks that can help there).
Refactors a bunch of the SemIRDiagnosticConverter to be able to use that
from Lower to access source locations there to use in debug info.
I assume some of this is a bit jank/would need to be fixed/improved in
the future - like the context functor that's passed into ConvertLoc?
(not totally clear what that's for/what the debug info will be missing
out on in its absence, I could throw a FIXME in there if you like)
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Still doesn't have line tables, so of limited value (at least now
this'll be enough that LLVM really generates debug info into the
resulting object file (whereas with only the compilation unit metadata,
LLVM will consider it empty and avoid emitting any of it)) - but another
step along the path.
This also doesn't attach the right source location to the functions -
I'll do that in a follow-up change because I think it'll require the
majority of the refactoring between driver and check to extract the
essential functionality sem_ir_diagnostic_converter, I think, to allow
retrieving source locations during lowering.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This adds just the debug info metadata for Compilation Units (the top
level container of debug info) - but without anything in them, LLVM
won't emit them at all, so while this is testable at the IR level, it
isn't observable at the object level until more debug info is added.
A couple of starting points in this patch:
* A flag (`--debug-info`, seems to match the naming/style of other flags
in the carbon driver, though this is different from the naming
conventions of clang/gcc) that enables debug info when lowering. Open to
other names/approaches (on by default? historically debug info's been to
large/expensive to do this, so sticking with that precedent for now).
* Enabling that flag by default in the lowering tests - I do find the
churn on golden tests a bit rough, and adding more features to all the
tests means more churn, but it seems consistent with the approach so far
- keep an eye on this and perhaps revisit this if the churn gets too
annoying
---------
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
This removes the builtin FunctionType, replacing it with a FunctionType
instruction. The constant for a FunctionDecl is now a StructValue with
type of FunctionType.
Note this means a function declaration produces _both_ a type, and a
value of the type. This has some consequences in terms of circularity,
and makes the importing of function declarations a little more complex.
It'll get particularly peculiar for imports because of the behavior of
the reference, but that's a known issue due to other things such as
`alias`. The impact will hopefully be contained to
ResolvePrevInstForMerge (and ImportRefs).
To note a small formatting change in diagnostics:
```
- // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
- // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
On the parsing side, we treat `a.(b)` as a member access whose second
operand is a `ParenExpr` rather than a `MemberName`. A new node category
is added for the union of `MemberName` and `ParenExpr` to support this.
Checking is mostly reusing the same pieces we already have for simple
member access. Compound member access is in most ways a simplified form
of simple member access because it doesn't need to do any lookup.
Add a general substitution mechanism to support substituting symbolic
bindings with their values throughout symbolic constants and, more
specifically, types. This is done by decomposing the constant
instruction into its operands, substituting into the operands, and then
rebuilding the constant value by invoking the constant evaluator.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
When a member access names an interface member, perform impl lookup to
find the impl and its corresponding member.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Jon Ross-PerkinsandDana Jansens
Chandler Carruth
Richard Smith
josh11bandJosh L