The SymbolicBindingType refers to the type value that will be
substituted in for the BindSymbolicName, but holds onto the EntityNameId
from the BindSymbolicName instead of (or in addition to, for now) the
instruction.
The EntityNameId will be used to look in the ScopeStack to find the
witnesses either from the BindSymbolicName instruction, or other
instructions that specify `impls` constraints against the EntityName.
This will allow us to have the `T` in `I(T)` resolve to a `.Self`
reference in the type so that we get type equality with the binding's
type: `T:! I(.Self)`.
This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):
```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";
// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```
That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.
The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.
A few alternatives considered were:
- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This avoids impl lookups involving, say, `Core.Int` pulling in all ~65
impls in "prelude/types/int", which resulted in a lot of unnecessary
importing work, followed by a lot of unnecessary inst namer and inst
formatter work.
Before:
```
Ran 1335 tests in 6186 ms wall time, 146818 ms across threads
Slowest tests:
- toolchain/check/testdata/interop/cpp/function/arithmetic_types_bridged.carbon: 5611 ms, 5532 ms in Run
- toolchain/check/testdata/interop/cpp/function/operators.carbon: 2034 ms, 1981 ms in Run
- toolchain/check/testdata/primitives/import_symbolic.carbon: 1796 ms, 1786 ms in Run
- toolchain/lower/testdata/operators/arithmetic.carbon: 1729 ms, 1728 ms in Run
- toolchain/lower/testdata/function/generic/call_recursive_sccs_deep.carbon: 1700 ms, 1697 ms in Run
[==========] 1335 tests from 1 test suite ran. (682 ms total)
```
After:
```
Ran 1335 tests in 2419 ms wall time, 109587 ms across threads
Slowest tests:
- toolchain/check/testdata/interop/cpp/function/arithmetic_types_bridged.carbon: 1748 ms, 1665 ms in Run
- toolchain/check/testdata/interop/cpp/function/operators.carbon: 1106 ms, 1057 ms in Run
- toolchain/lower/testdata/function/generic/call_recursive_diamond.carbon: 1044 ms, 1041 ms in Run
- toolchain/lower/testdata/function/generic/call_recursive_sccs_deep.carbon: 1015 ms, 1012 ms in Run
- toolchain/lower/testdata/operators/arithmetic.carbon: 998 ms, 997 ms in Run
[==========] 1335 tests from 1 test suite ran. (652 ms total)
```
That's still slower than it should be, but a large improvement
nonetheless.
Fixes#6029
This uses each vector's size as a barrier between lists, to eliminate
the possibility of incidental collisions between entries of different
lists. This is the same as is done inside `AddBlock`.
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
This switches from the `CollectNamesInBlock` approach for entities, to
instead traversing entities as they're encountered. For example, when
traversing constants, when a type is found, the entity will have its
block queued for processing.
This leads to a change in the traversal order, which affects
disambiguation done by numeric sequencing (since that's just showing the
traversal order).
This will allow for simpler "name based on name" logic. This is
something I plan to use for:
- impls: `<type>.as.<interface>.impl`
- functions: `<entity>.<member function>`
- Note an impl may be used as the entity for a bound function.
By naming the entities as they're encountered, I'll be able to rely on
the generated names rather than recalculating them.
To assist this, I'm also differentiating between the ambiguous and
disambiguated name. Otherwise, we could end up with things like
`<function>.<disambiguator>.<call>.<other disambiguator>`, where the
repeated disambiguator may not be necessary in order to get full
disambiguation. It's also a smaller delta from the current output.
Note, changing `Name` to a class felt appropriate given its shape. I was
also noticing that parts of its API were unused, and the class helps
detect unused private members.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Currently if the first operand contains an error, we will return error,
even though the second operands contains a runtime, and it has a
stronger priority (the phase always goes up if possible).
Import is only allowed on instructions with compile-time values, so we
crash if we ever try to import a runtime value. Importable instructions
must diagnose unexpected runtime values and produce errors in the semir
from which they would be imported so that runtime values are never
imported by another semir.
If we had an instruction where you had an error value from the first
operand, and runtime from the second, and we imported it:
- Before https://github.com/carbon-language/carbon-lang/pull/5728 we
would crash in import, but only because we treated errors as runtime
- After https://github.com/carbon-language/carbon-lang/pull/5728 we
would import ErrorInst because we propagate errors. This is desirable
for cases with compile-time values and errors present only.
- After this PR, we would crash again, cuz you're importing a runtime
thing.
This change means that instructions containing an
`InstConstantKind::Never` instruction like`ValueParam` will consistently
evaluate to a runtime value, even if there are errors present. This is
visible in the `BindName` instructions changing in the semir, where they
became constant `ErrorInst` values previously but no longer do.
This drops file_test runtime from about 3s to 2.5s on my machine, which
is now ~30% faster than before #5653 slowed things down by adding a lot
of stuff to the production prelude.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This preserves the constant values of the arguments to the thunk, which
is important if the thunk requires conversion of an `IntLiteral` to some
other type. This should become unnecessary once we have form support,
but avoiding the indirection through a thunk function seems valuable
even once that support is in place.
To support this, track whether a function is a thunk on the Function
object, and if so, what the callee of the thunk is. This information is
also included in formatted SemIR when dumping the thunk.
Build a `SpecificConstant` (if needed) and `NameRef` instruction when
referencing the thunk target from a thunk. The former is necessary if
the impl is generic in order to call the right version of the thunk
target. This previously caused a crash in lowering.
Also add some more check testing for the interaction of thunks and
generics. This testing uncovered an unrelated bug with thunks for
generic interface functions for which I've added a TODO.
Previously we walked the global variables defined by the current file
and emitted an LLVM global variable definition for each of them. Now
instead, when emitting a constant reference to a global variable, we
emit an LLVM global variable declaration, and we then subsequently walk
the global variables defined by the current file and convert each of
them from a declaration to a definition.
In order to make import of names of global variables work, add support
for import of `var`, as well as support for importing `tuple_access` and
`tuple_pattern` in the case where the `var` has a tuple pattern in its
declaration. Also treat `bind_name`s that are reference bindings to
`var`s as having the same constant reference value as their `var` so
that we can properly import and lower them.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
This was originally needed to support constant evaluation of name
expressions, but that's now done in a different way.
This is actually a step toward treating all patterns as constants. The
upcoming change will do so in a slightly different way, and so it will
simplify the review to start from a baseline where patterns are never
constant.
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of storing a `TypeId` that always refer to a facet type that
always contains exactly a single interface, store the interface
directly.
Also improve stringification of `LookupImplWitness` and witness access
into it, switching to using newly-added functionality for stringifying
specific interfaces.
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.
FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.
FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.
The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.
There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Replace the large and growing `TryEvalInstInContext` function with one
function per kind. While we still have special-case handling for a small
number of instruction kinds, most instructions are now handled either
fully automatically or use a common codepath that evaluates the
instruction operands and then performs an eval-context-independent
evaluation of the instruction.
To support this, `InstConstantKind` is expanded to describe more
fine-grained details about how each kind of instruction interacts with
constant evaluation. Also, the operand kinds of instructions become
slightly more fine-grained: we now distinguish between operands that
describe the destination of an initializing expression (`DestInstId`)
from other `InstId` operands, because `DestInstId` operands need
different treatment during constant evaluation. In particular, an
initializing expression can have a constant value even if its
destination is non-constant or has not yet been set, because evaluation
of an initializing expression doesn't include the store to the
destination.
Some minor test changes:
- We now more consistently propagate errors into the results of constant
evaluation, so more instructions that depend on errors have a constant
value of `<error>`.
- Diagnostic location for invalid array types now point at the whole
array type rather than the array index expression, because
`EvalConstantinst` doesn't have access to the original expression.
- Diagnostic for failed `RequireCompleteType` doesn't print the original
type any more because `EvalConstantInst` doesn't have access to the
original expression.
As a follow-up, some of this -- in particular, the `EvalConstantInst`
overloads -- will be moved to a separate file, in an effort to split the
overall constant evaluation machinery apart from the logic to evaluate
each individual kind of instruction.
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a full entity representation for associated constants, and build a
`Generic` object for them. This `Generic` is parameterized by the
enclosing `Self` type, allowing the use of `Self` within the type of the
associated constant to be supported.
When performing impl lookup for an associated constant, produce the type
with the provided self type substituted for its `Self` along with any
generic parameters of the interface.
Split the handling of associated constant declarations into two parts,
corresponding to the code before the `=`, and the code between the `=`
and `;` (if any). The former goes into the generic declaration region;
the latter into the generic definition region. This prepares us to
handle the default value for an associated constant, but for now we're
just storing the information and not actually using it.
Remove the entity type field from `assoc_entity_type`, because it's
almost unused and is an attractive nuisance -- it must necessarily be a
type in the generic scope of the associated constant rather than in the
scope of the instruction (because there is no `Self` anywhere else),
which means that it's hard to substitute into or derive meaning from.
See `toolchain/check/testdata/impl/assoc_const_self.carbon` for tests of
the new functionality; these used to cause the toolchain to crash.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Use a deque to maintain the set of instructions to be walked over. so
that the loop can append more instructions (with their related scope)
during iteration without requiring recursion.
---------
Co-authored-by: jonmeow <jperkins@google.com>
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of treating `Core.Int` as the toolchain's builtin `IntType`,
model it as a class that adapts the builtin type. This aligns us better
with the intended language model, gives an associated library for
`impl`s involving `Core.Int` to live within, and opens the door adding
member functions to `Core.Int` if we decide that is desirable.
Remarkably it also seems to make the formatted SemIR a little smaller,
because a call to a generic class generates less IR than a call to a
function.
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
The new `FacetValue` instruction represents `C as I` for some type `C`
and facet type `I`. It is named `FacetValue` instead of just `Facet` to
parallel the `FacetType` instruction.
This PR uses this instruction represent the facet value `Self` in an
`impl` declaration. This instruction will be used in the future to also
support things like:
* `C as I` where `C` is a class; and
* forming a specific for a generic with a `T:! I` parameter where `T` is
being given a concrete value.
(Here `I` is an interface or other non-`type` facet type.)
Also do some renaming and add some comments to make things a bit more
clear.
* `FacetTypeAccess` -> `FacetAccessType` to clarify this is not access
of a facet type, but access of the type of a facet
* `.facet_id` -> `.facet_value_inst_id` to parallel the `FacetValue`
instruction
`FacetAccessWitness` will be in a future PR.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
- Do not include entities imported from files that we are not dumping.
- Do not include constants and import_refs that are not referenced by
something that we are including in the formatted output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
This does a few things:
* Replaces the single `TypeId` in the `FacetTypeInfo` struct with a
vector of `InterfaceId`, `SpecificId` pairs (sorted in id order)
representing the set of interface requirements of the facet type. This
will later be used to support facet types with multiple interface
requirements (as in `I & J` or `I where .Self impls J`).
* Replace `InterfaceType` instructions (used as the type of an
`InterfaceDecl` instruction) with `FacetType` instructions (introduced
in #4460) with a (newly introduced) `FacetTypeFromInterface()` function.
* Replace code that consumed `InterfaceType` values with code that
consumed `FaceType` values. I've generally left the assumption in the
code that it is dealing with a single interface, using the (newly
introduced) `FacetTypeInfo::TryAsSingleInterface`, and producing an
error otherwise. There isn't yet support for the `&` operator or `where
.Self impls`, so this is generally a good assumption for now, except you
can get a facet type with no associated interfaces from a `type
where`... expression. In some cases, the facet type value is pulled from
the evaluation of an `InterfaceDecl` instruction, where the single
interface assumption will hold permanently.
* Some related cleans up: nicer stringification and formatting of facet
types, suppression of some errors when there already was an error.
There is still a lot left to do, including:
* Type `type` should be a facet type with a reserved id, replacing the
built-in instruction.
* Code using `TryAsSingleInterface` should generally be upgraded to
handle more than (or less than) one interface. Name lookup should be
particularly exciting.
* Operator `&` should be defined on facet types, unioning their
interface and other requirements.
* Requirements from a `where` clause don't do anything yet.
* Impls and impl lookup need to resolve facet types, and do things like
determine if all the associated constants are given values.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Geoff Romer <gromer@google.com>
This is in particular to avoid churn from changes such as #4370. I think
the import list can be helpful (particularly to understand what the
library is aware of), but it's a different trade-off for the prelude
package due to the implicit imports.
This PR makes it so that types can implement the `IndexWith` interface
so that they can provide their custom indexing behavior.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Also surround it in square brackets rather than parentheses. This
matches the format used by Clang and GCC, and means diagnostics will
still match the `file:line:col: error: ` pattern used by some IDE tools.
Before:
```console
fail_builtins.carbon:11:11: error(AliasRequiresNameRef): alias initializer must be a name reference
```
After:
```console
fail_builtins.carbon:11:11: error: alias initializer must be a name reference [AliasRequiresNameRef]
```
Also tighten up test regex to only match on `STDERR` lines that list a
file name.
This is to help identify which diagnostics we're actually using.
Note that driver/testdata still has tests which don't pass this flag,
and so continue to test the kind-less (default) behavior.
Dana Jansens
Jon Ross-PerkinsandDana Jansens
Richard Smith
Boaz Brickner
Calvin
David BlaikieandJon Ross-Perkins
Brymer MenesesandJon Ross-Perkins