Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
This drops file_test runtime from about 3s to 2.5s on my machine, which
is now ~30% faster than before #5653 slowed things down by adding a lot
of stuff to the production prelude.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
People seemed receptive [on
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1379196447827689553),
so proceeding.
For the two name conflicts, I've set it up so that there's a
"foo.carbon" and "foo_with_prelude.carbon", to indicate that the
no-prelude approach is preferred (with a shorter name).
Note min_prelude will require a little more work/thought, I want to
avoid adding `--custom-core` etc.
Modifies the core package and literal handling to use factory functions
for standard type literals.
Updates function/builtin/import.carbon to stop depending on the prelude,
since it would list all the impls in the core file. Updates
alias/builtins.carbon to be failing (the type values cannot be aliased).
Note, I assume this doesn't affect all the TODOs (like for i32.carbon),
but does cut some things down (and requires updating some tests that
have prelude name conflicts, but I think they were intended to be
updated this way).
Change syntax for package declaration to put the `impl` keyword at the
start and remove the `api` keyword.
To support this, rearrange processing of package, library, and import
declarations to use the general modifier handling support in declaration
parsing rather than special-case logic.
There is an ambiguity in `impl package.Foo as Bar`, which we resolve by
treating `package` as an introducer after a modifier only if it's not
followed by `.`.
This was to track use of a declaration after import, prior to a
redeclaration. Per [discussion on
Discord](https://discord.com/channels/655572317891461132/1217182321933815820/1236016521059237962),
we likely don't need this check due to the change in behavior of
`extern`.
Rather than potentially getting one of many `extern` decls and depending
on it by accident, it is now planned to be _required_ to be imported,
and the library doing a non-`extern` decl must _know_ it's importing the
`extern` decl. The stricter requirement on the library means it now
seems more reasonable to use the `extern` decl.
So kind of rolling back #3831, though keeping `ImportIRInstId` (at least
for now) and keeping `Loaded`/`Unloaded` terminology (seems a nicer
fit).
This removes the builtin FunctionType, replacing it with a FunctionType
instruction. The constant for a FunctionDecl is now a StructValue with
type of FunctionType.
Note this means a function declaration produces _both_ a type, and a
value of the type. This has some consequences in terms of circularity,
and makes the importing of function declarations a little more complex.
It'll get particularly peculiar for imports because of the behavior of
the reference, but that's a known issue due to other things such as
`alias`. The impact will hopefully be contained to
ResolvePrevInstForMerge (and ImportRefs).
To note a small formatting change in diagnostics:
```
- // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
- // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Change the names for emitted globals for constants with storage to
include both the name of the constant and the name of the use.
This causes the instructions to also be named in SemIR and in LLVM IR
constants.
We don't need it any more, and removing it simplifies a few things:
- One fewer predefined `File` and reserved ID.
- We now have simply `Builtin` instructions for builtins, instead of
having an `ImportRef` that indirectly references a `Builtin`.
- `ConstantId`s now always refer directly to a local constant, instead
of sometimes referring to an `ImportRef` for a constant in the builtins
IR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
Per offline discussion with chandlerc and jonmeow, use different
builtins for signed versus unsigned integer ops instead of looking at
the type. In this commit, the arithmetic builtins (add, sub, negate,
mul, div, mod) are split. I'll apply the same change to comparisons and
to right shift in separate PRs.
Use the complete location of the `as` conversion rather than the
location of the first operand, so diagnostics referring to the result
point at the whole thing.
Move completeness check to the point where the function is defined or
first called. This means we also defer deciding whether the function has
a return slot until that point. Instead of storing a return slot per
function, store the location of the return storage, which may or may not
be used, and compute and store a separate flag saying whether to use it
at the point of first use or definition.
This is the final piece in supporting simple `Make` functions in classes
as a replacement for constructors.
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
Adds ImportIRId::ApiForImpl to reserve a specific slot for the `api`
import, so that the code can trivially determine whether an import is
from the same library. This is then used for merging function
declarations, because the rules for redeclarations in the same library
slightly differ as compared to other imports (note they're also not
identical to same-file rules).
The main thing this leaves from the recent #3762 is verifying that
entities forward declared in the `impl` file are also defined, but
that's not in-scope for merging; it's moreso post-checking validation.
Note, a lot of our `invalid <entity> ID` comments in ids.h were
incorrectly copy-pasted, so I've cut `<entity>`.
This doesn't significantly change logic, although I'm trying to add the
location to used state.
The issue I'm trying to address is how to identify a declaration as
"allowed to be redeclared". Consider:
```
library "a" api;
extern fn F();
```
```
library "b" api;
extern fn F();
```
```
library "c" api;
import library "a";
import library "b";
var x: auto = F();
fn F();
```
What currently happens is:
1. On import of "a", `F` becomes ImportRefUnused
2. On import of "b", `F` becomes ImportRefUsed in order to merge.
3. In "c", the call `F()` doesn't change the state.
4. In "c", the declaration `fn F();` needs some breadcrumb to understand
whether "F" has been referenced, as in step (3) here.
What I want to happen is:
1. On import of "a", `F` becomes ImportRefUnloaded
2. On import of "b", `F` becomes ImportRefLoaded in order to merge.
3. In "c", the call `F()` causes `F` to become ImportRefUsed
4. In "c", the declaration `fn F();` detects that `F` is already
ImportRefUsed, and can use the associated `used_id` for a diagnostic
about why redeclaring is invalid.
Note this PR isn't implementing (4). I'm focused on the refactoring to
add a new ImportRef state here.
This is temporary: eventually per the design we should be forming
integer literals whose types reflect their values. But for now we should
ensure that values fit within their types.
This also fixes canonicalization of integer constants and hence of array
types, because we no longer have multiple different representations of
each `i32` value depending on the bit-width used for the literal.
For now, a builtin function is defined by specifying a string literal
initializer in a function declaration:
```carbon
fn MyBuiltin(a: i32) -> i32 = "builtin.name";
```
End-to-end support is included for a sample `"int.add"` builtin
performing integer addition, covering constant evaluation and code
generation.
The implementation here needs substantial refactoring before we'll be
ready to start adding more builtins. That refactoring work will be
coming next. This change is aiming to checkpoint some incremental
progress.
Jon Ross-Perkins
Dana JansensandJon Ross-Perkins
Richard Smith