Adds min-preludes more tests which were seen as slow and their
surrounding neighbours. This drops the file_test runtime on my machine
from about 6s to about 4.5s.
For a few files that are clearly only testing diagnostics, we drop the
if-present semir ranges and the associated TODO.
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
These don't fully work in check and beyond yet, because they're not
added into lexical lookup, but already mostly do the right thing.
Per #3407, disallow namespace declarations anywhere other than at file
scope for now.
We don't treat statements starting with a packaging introducer keyword
(`package`, `library`, `import`) as declarations because they're
sufficiently unlikely to occur that the error recovery doesn't seem
important, and this avoids needing to disambiguate `package.` at the
start of an expression.
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This seems slightly redundant for a locally-defined class, where there
will be a complete_type_witness instruction earlier in the class, but is
important for imported classes, where we're currently doing the wrong
thing in a way that's invisible in formatted SemIR.
- Do not include entities imported from files that we are not dumping.
- Do not include constants and import_refs that are not referenced by
something that we are including in the formatted output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Also surround it in square brackets rather than parentheses. This
matches the format used by Clang and GCC, and means diagnostics will
still match the `file:line:col: error: ` pattern used by some IDE tools.
Before:
```console
fail_builtins.carbon:11:11: error(AliasRequiresNameRef): alias initializer must be a name reference
```
After:
```console
fail_builtins.carbon:11:11: error: alias initializer must be a name reference [AliasRequiresNameRef]
```
Also tighten up test regex to only match on `STDERR` lines that list a
file name.
This is to help identify which diagnostics we're actually using.
Note that driver/testdata still has tests which don't pass this flag,
and so continue to test the kind-less (default) behavior.
Doing this to a couple of diagnostics was suggested in review comments
on #4320, so I've applied the suggestions across the whole file.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Add support for initializing types like `GenericClass(i32)` from a
struct literal. A new kind of instruction, `complete_type_witness`, is
added to the class definition to track the object representation type so
that it's visible to the generics machinery. Accesses to the object
representation of a class have all been updated to pass in the class's
`SpecificId` so that the types of the fields of the specific class are
used instead of the types of the fields of the generic class in places
that look at the object representation -- primarily class
initialization.
Don't use the pretty-printed type name, because that's intended for
diagnostics, not for a theoretically machine-readable format like SemIR.
Types are always constants, so omit the leading `constant.` on the type
instruction name.
Don't format the *type of* the function `F` as `"F"`. Instead use
`"<type of F>"`.
Also improve instruction naming for function and generic class name
values: name the value after the function or generic class, and add a
`.type` suffix to the type.
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
This removes the builtin FunctionType, replacing it with a FunctionType
instruction. The constant for a FunctionDecl is now a StructValue with
type of FunctionType.
Note this means a function declaration produces _both_ a type, and a
value of the type. This has some consequences in terms of circularity,
and makes the importing of function declarations a little more complex.
It'll get particularly peculiar for imports because of the behavior of
the reference, but that's a known issue due to other things such as
`alias`. The impact will hopefully be contained to
ResolvePrevInstForMerge (and ImportRefs).
To note a small formatting change in diagnostics:
```
- // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
- // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.
This is a trivial code change, but ripples edits through test files.
Rather than just adding `Self` to the lexical scope, add it to the
class's name scope so that it is visible in later lexical scopes for the
same class -- in particular, for out-of-line definitions of members.
Also switch some tests in `check/testdata/class` over to making
idiomatic use of `Self` both inside a class and out-of-line, now that it
works more consistently.
Note that this does not permit using `Class.Self`, but only because we
don't yet support keyword names after `.` at all. If that changed, one
could use `Class.Self` to redundantly refer to `Class`. Whether we allow
that is left to a future decision.
Rather than producing multiple constants with the same value, fold all
instances of a given constant to the same constant instruction.
A future PR will use this to replace the current type canonicalization
system.
This is accomplished by tracking an extra bit on the ID we store in the
constant values table, and propagating that from subexpressions to the
enclosing expression. This extra bit is not yet computed correctly for
types; that will be addressed in later PRs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Form a side table with constant values for each instruction. Evaluation
is only supported for a few very simple kinds of instruction for now.
This is not observable outside of the SemIR output, because nothing
depends on expressions having a constant value phase yet.
Another incremental change to diagnostic formatting. I simply recurse
over all the tokens in the subtree of a parse node and construct a
`DiagnosticLocation` that covers all of the tokens.
I believe it's nicer for the user to be directed at the entire chunk of
source where the error is occurring rather then just pointing at the
bracketing/terminator tokens, but let me know if you all agree.
Dana Jansens
Jon Ross-Perkins
Richard Smith
Boaz Brickner
David Blaikie
Geoff RomerandRichard Smith
josh11bandJosh L
Jacob Schneider