Right now, the class destroy impl is incorrectly generated (first
discussed [in
Discord](https://discord.com/channels/655572317891461132/941071822756143115/1418614787449032826)).
If we want it to be correct, deferred definition logic would need to be
added, and the declaration would need to be moved inside the `class`
scope (along with whatever generic logic that needs).
This instead switches to a blanket impl, to avoid creating latent bugs
with generating the `impl` and function body in the wrong scope. This
approach uses the same blanket impl as aggregate destruction that was
added by #6098.
The intent here is to allow progress on other parts of `Destroy`. For
example, under this model the implementation of the function body could
be done as part of lowering the specific.
This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):
```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";
// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```
That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.
The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.
A few alternatives considered were:
- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This uses each vector's size as a barrier between lists, to eliminate
the possibility of incidental collisions between entries of different
lists. This is the same as is done inside `AddBlock`.
The self access is important; for the test `generic_class.carbon` being
added to `toolchain/check/testdata/class/destroy_calls.carbon`, it was
using `%T.as.Destroy` instead of `%D.as.Destroy`, indicating the default
blank impl was being used instead of the type-specific version. That
test is trying to focus on the issue, but the delta is visible in a
couple other files in this PR, for example
`toolchain/check/testdata/class/generic/init.carbon`.
I'm separately working on getting rid of the default impl, which is how
I noticed this.
I was thinking about this for destruction, which I may not be able to
use it for, but still think this may be a good change to keep features
consistent.
Although this focused on `Destroy` support, some choices here around
`implicit_type_impls` are because copy/move will likely follow a similar
approach. I'm trying not to predict too much about how we'll structure
those, but I'm putting `Destroy` impl logic in a file that could perhaps
be shared with those. They'd likely be interested in similar things,
e.g. traversing members of types (particularly class, struct literal,
tuple literal).
At present this sets the destroy function as `no_op` which is consistent
with current logic, but has a TODO to correctly define.
Constant importing for functions changes slightly due to some issues I
was having with `GetFunctionType`. zygoloid suggested this approach to
avoid `EvalInst` logic.
Adds a flag for controlling whether to generating these impls. While
this does generation for `class`, as noted above this'll also need to be
done for tuples and struct literals, which would leave the `none.carbon`
min_prelude unable to use any types. Note if destruction *would* occur,
it'll still look up `Core.Destroy` for that and fail, but that's already
true of any test using `none.carbon`. I'm trying to use the flag to see
if we can keep `none.carbon` working mostly-consistently.
I'd tried separating out the flag to #5852, but that got a lot of
pushback over whether the behavior was appropriate. I'm hoping that the
interactions here make it clearer why the particular approach -- the
goal is not to enable advanced testing, or create some new end-user
behavior that we really support, it's just to keep no-prelude tests
functional. The main question raised there was why not just keep
generating `impl T as Core.Destroy` if `fn destroy` is present -- but I
think here it should be apparent that would require additional
complexity, as the generation of `impl T as Core.Destroy` is not
currently conditioned based on the implementation of `fn destroy`. I'd
rather add complexity to this flag only if it's enabling interesting
test functionality.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This seems slightly redundant for a locally-defined class, where there
will be a complete_type_witness instruction earlier in the class, but is
important for imported classes, where we're currently doing the wrong
thing in a way that's invisible in formatted SemIR.
Represent the type as an `InstId` rather than as a `TypeId` to preserve
how it was written and better support tracking its value in a generic.
Add accessors to `Class` to get the base and adapted type to reduce code
duplication, and add `TypeStore::GetObjectRepr` to make it easier to map
from a type to its possibly-adapted object representation type. In
passing, also move `GetIntTypeInfo` and `GetUnqualifiedType` into
`TypeStore`.
This fixes specifics of generic adapters to properly look at the
specific adapted type, and also fixes importing of adapters.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
- Do not include entities imported from files that we are not dumping.
- Do not include constants and import_refs that are not referenced by
something that we are including in the formatted output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
* The `extended_scopes` in a `NameScope` were represented by a
`NameScopeId`. Replace that with an `InstId` of an instruction returning
the type that is extending this name scope.
* `Context::LookupQualifiedName` now can take multiple scopes to look
in.
* `GetAsLookupScope` was moved out of `member_access.cpp` and is now
`Context::AppendLookupScopesForConstant`
This PR also fixes some existing issues that were revealed as part of
writing and testing this PR:
* Additional validation and handling of invalid ids.
* `extend impl` in a class is not properly imported yet, but at least
now it doesn't crash.
The change to use an `InstId` also allowed some diagnostics and
formatting to be improved.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This is in particular to avoid churn from changes such as #4370. I think
the import list can be helpful (particularly to understand what the
library is aware of), but it's a different trade-off for the prelude
package due to the implicit imports.
This PR makes it so that types can implement the `IndexWith` interface
so that they can provide their custom indexing behavior.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Introduces the `BindingPattern` and `SymbolicBindingPattern` insts, and
a separate stack of pattern blocks that they are emitted into. The
intent is to generate the corresponding pattern-matching insts (like
`BindName`) from them in a separate pass, but that is deferred to future
PRs.
See
[here](https://docs.google.com/document/d/1U_vQH17V893J9aF1LJXUnFYBNSs2MjKl4bJPaWCB2zo/edit?usp=sharing&resourcekey=0-w0xGYZ0An31Kpz-wvzSXwQ)
for the design this is based on, but note that during review we have
chosen to deviate from that design by putting the patterns in separate
blocks, and omitting the "forward references" from a `BindingPattern` to
its corresponding `BindName`. This in turn necessitates having separate
inst kinds for symbolic and non-symbolic binding patterns.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add support for initializing types like `GenericClass(i32)` from a
struct literal. A new kind of instruction, `complete_type_witness`, is
added to the class definition to track the object representation type so
that it's visible to the generics machinery. Accesses to the object
representation of a class have all been updated to pass in the class's
`SpecificId` so that the types of the fields of the specific class are
used instead of the types of the fields of the generic class in places
that look at the object representation -- primarily class
initialization.
Add these interfaces to the core library. For now, they're two separate
interfaces because we don't yet support one interface extending another.
This collapses a lot of the layering in check: for example, the call
building logic depends on implicit conversions, conversions now depend
on the overloaded operator machinery, and that machinery depends on
building calls.
In passing, improve the diagnostics for failing to find a name required
from the prelude. Also convert all the transitively-called code from
`NodeId` to `LocId` given the latter is what the conversion machinery
has available.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This implements a few closely related features:
- Starts merging namespaces discovered inside imports.
- Stores results of cross-package name lookup as an entry inside the
scope.
- Note this is particularly visible with `i32`.
- Moves more of the imported instructions to the import scope.
Note this is primarily for executing the namespace TODO in check.cpp,
which is removed here.
`testdata/namespace/merging_with_indirections.carbon` tests key
behavior.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Also adds import_ir_scope to namespace formatting. I'd done this as an
aid for #4153, and am splitting it out.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
By adding an `ImportDecl` instruction, this creates something that can
be referenced through `ImportIRInst`.
packages/no_prelude/implicit_imports_entities.carbon is getting a test
of this (import_conflict and import_conflict_reverse).
Also re-packs ImportIR from 24 bytes to 16 on 64-bit, since I'm touching
everywhere that makes one anyways.
Don't use the pretty-printed type name, because that's intended for
diagnostics, not for a theoretically machine-readable format like SemIR.
Types are always constants, so omit the leading `constant.` on the type
instruction name.
Don't format the *type of* the function `F` as `"F"`. Instead use
`"<type of F>"`.
Also improve instruction naming for function and generic class name
values: name the value after the function or generic class, and add a
`.type` suffix to the type.
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
This removes the builtin FunctionType, replacing it with a FunctionType
instruction. The constant for a FunctionDecl is now a StructValue with
type of FunctionType.
Note this means a function declaration produces _both_ a type, and a
value of the type. This has some consequences in terms of circularity,
and makes the importing of function declarations a little more complex.
It'll get particularly peculiar for imports because of the behavior of
the reference, but that's a known issue due to other things such as
`alias`. The impact will hopefully be contained to
ResolvePrevInstForMerge (and ImportRefs).
To note a small formatting change in diagnostics:
```
- // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
- // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
Rather than just adding `Self` to the lexical scope, add it to the
class's name scope so that it is visible in later lexical scopes for the
same class -- in particular, for out-of-line definitions of members.
Also switch some tests in `check/testdata/class` over to making
idiomatic use of `Self` both inside a class and out-of-line, now that it
works more consistently.
Note that this does not permit using `Class.Self`, but only because we
don't yet support keyword names after `.` at all. If that changed, one
could use `Class.Self` to redundantly refer to `Class`. Whether we allow
that is left to a future decision.
Previously we used the default inst block formatting, which writes out a
parenthesized list of references, which would always be 'unexpected
instref's because nothing else prints the instructions in the decl
block.
In addition, track the decl block for function declarations like we do
for other kinds of declaration. This means that the parameter
declarations for a function are now properly rendered into the formatted
IR. Note that this adds a lot of verbosity to `function_decl`, but it
does accurately reflect the IR, and we'll probably want this information
to be printed once we start supporting more complex generic function
declarations.
This removes almost all the 'unexpected instref's in our formatted
output. There are remaining cases when a declarative scope contains
multiple blocks, where we only track one of those blocks. That happens
when there is control flow within declarative scopes, and for error
recovery when a class or interface or similar is defined more than once.
As requested in #3730.
By adding a constant to ClassDecl/InterfaceDecl, we're able to remove
name reference special-casing. Use TryEvalInst on the Decl to generate
the Type. For ClassDecl, then use the generated constant for
self_type_id.
Building on #3636 which handles the general import case, add special
casing for namespaces. Namespaces can be combined cross-IR, so it's a
little more complex.
The implementation adds import_id to the Namespace instruction as a
reference to find the original using the normal structure. This is
achieved by moving the name_id to NameScope to free up space.
---
I considered a few alternatives...
I considered adding import_id to NameScope, but:
1. It's more consistent with things such as Function or Class that
provide name_id on the info object rather than the instruction.
2. I thought it more likely that there would be more NameScope cases
that might want a name_id rather than the import_id, since ImportRef
will typically be used.
I considered putting the import source (cross-ref IR id + inst id) on
the NameScope versus a separate ImportRef, which seems like the
strongest argument towards the NameScope approach because it removes an
instruction. That just felt inconsistent though, and the overhead of
instruction-per-imported-namespace should be low (theoretically few
namespaces should be used). Plus I feel a bit odd adding two
generally-unused ids to NameScope.
A specialized Namespace structure could also have been created to store
the import_id, but that would add an indirection to the NameScope.
Remove the type canonicalization mechanism and instead rely on constant
canonicalization to deduplicate types.
Rename the `Canonicalize*Type` functions to reflect that they're no
longer performing canonicalization. Switch code that creates types due
to semantic checking, rather than due to source syntax, to directly
create type constants through evaluation rather than creating an
instruction and evaluating it to produce a separate constant
representation.
The mapping from `const (const T)` that was previously performed by type
canonicalization is now implemented in expression evaluation instead.
The value `<error>` is now treated as a constant value, with a special
property that an instruction involving `<error>` that could possibly be
constant evaluates to `<error>`. This helps avoid producing follow-on
errors when an error occurs as a subexpression of an expression, such as
a type, that is intended to be constant.
Rather than producing multiple constants with the same value, fold all
instances of a given constant to the same constant instruction.
A future PR will use this to replace the current type canonicalization
system.
This is accomplished by tracking an extra bit on the ID we store in the
constant values table, and propagating that from subexpressions to the
enclosing expression. This extra bit is not yet computed correctly for
types; that will be addressed in later PRs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Form a side table with constant values for each instruction. Evaluation
is only supported for a few very simple kinds of instruction for now.
This is not observable outside of the SemIR output, because nothing
depends on expressions having a constant value phase yet.
Namespaces are copied, which means also adding their name to the
underlying instruction. It happened not to be done previously; the name
was only in name lookup.
Since the only import supported right now is the default import,
functionality is limited; in the future I'll need to deal with namespace
vs package conflicts.
Tests of namespace imports are under "namespace" -- I figured this would
be best for scaling as more instructions get support.
This also improves some debugging-related output that I was trying to
use while trying to build the support.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Jon Ross-Perkins
Richard Smith
Boaz Brickner
David Blaikie
josh11bandJosh L
Brymer MenesesandJon Ross-Perkins
