Switch from recursing into non-canonical instruction fields to
separately canonicalizing those fields. This means we now form canonical
`InstBlockId`s, `TypeBlockId`s, `IntId`s, `FloatId`s, and `BindNameId`s
at least in the cases when they're referenced by a constant instruction.
This reduces the overall runtime for @chandlerc's 10MLoC example by
27.5% on my machine.
This adds a `BindExport` instruction in order to better track the
location of the `export` itself, but a `bind_name_id` is also added to
`ImportRef` so that we know quickly where to put it in name lookup.
Merging identical names is a TODO. I haven't quite decided how best to
achieve that, because I do think the BindExport should be what's
actually added to name lookup.
Also, I will probably add a mode to DeclNameStack that blocks
non-namespace scopes. This seems to already be an error, but the wrong
one (maybe due to lack of support for cross-file decl/def support).
This is modeled analogously to FunctionType. So far, GenericClassType
has no operations, but eventually values of that type will be callable
like values of FunctionType.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This was to track use of a declaration after import, prior to a
redeclaration. Per [discussion on
Discord](https://discord.com/channels/655572317891461132/1217182321933815820/1236016521059237962),
we likely don't need this check due to the change in behavior of
`extern`.
Rather than potentially getting one of many `extern` decls and depending
on it by accident, it is now planned to be _required_ to be imported,
and the library doing a non-`extern` decl must _know_ it's importing the
`extern` decl. The stricter requirement on the library means it now
seems more reasonable to use the `extern` decl.
So kind of rolling back #3831, though keeping `ImportIRInstId` (at least
for now) and keeping `Loaded`/`Unloaded` terminology (seems a nicer
fit).
This removes the builtin FunctionType, replacing it with a FunctionType
instruction. The constant for a FunctionDecl is now a StructValue with
type of FunctionType.
Note this means a function declaration produces _both_ a type, and a
value of the type. This has some consequences in terms of circularity,
and makes the importing of function declarations a little more complex.
It'll get particularly peculiar for imports because of the behavior of
the reference, but that's a known issue due to other things such as
`alias`. The impact will hopefully be contained to
ResolvePrevInstForMerge (and ImportRefs).
To note a small formatting change in diagnostics:
```
- // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
- // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
As we talk about how imports should work, we want to start having
indirectly imported IRs in `import_irs`, where it's currently only
directly imported IRs. The tracking of `CheckIRId` is set up to be able
to determine whether an IR being indirectly imported is actually already
tracked (and may be a direct import). Changes here to how ApiForImpl is
handled start using the logic.
Note that indirect imports may be added while processing even the first
import from the current library. As a consequence, it's necessary to
prepare this map before starting imports, in particular, setting
ApiForImpl before any indirect imports may encounter the same import.
Also, prior validation that `num_irs` matches the final size are no
longer relevant.
check_ir_id is tracked on SemIR because I want to be able to figure it
out given an ImportIR, but the mapping is ephemeral after checking and
so I store that in Context.
I'm putting relevant logic into import_ref.cpp because the primary
alternative is import.cpp, and as more logic is added, ImportRefResolver
will be adding import IRs.
Make constant emission non-recursive, and stop building a bogus
FunctionContext to emit constants.
To support this, move `InstConstantKind` from the typed instruction
definition into the `.def` file, and add more macros to allow us to
generate case labels based on whether an instruction is a constant.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
This allows ImportRefs to point at a potentially distant instruction,
while still providing a LocId that can be used for diagnostics. I think
this'll be used if we're trying to point ImportRefs at canonical
instructions in distant IRs. It conveniently eliminates a special-case
in check.cpp.
Restructures LocIdAndInst::Untyped because I think it's not really
needed after this change (the key non-import use was GetWithLocId, which
I just give friend access for). Adding NoLoc for things that don't
provide _any_ location because it turns out Inst can easily be passed in
this way which was not what I had intended, but is used.
We don't need it any more, and removing it simplifies a few things:
- One fewer predefined `File` and reserved ID.
- We now have simply `Builtin` instructions for builtins, instead of
having an `ImportRef` that indirectly references a `Builtin`.
- `ConstantId`s now always refer directly to a local constant, instead
of sometimes referring to an `ImportRef` for a constant in the builtins
IR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds support for unary `-` and binary `+`, `-`, `*`, `/` for floating
point types.
Real literals are now transformed to `llvm::APFloat`s during the check
phase into the `FloatLiteral` instruction.
This PR likely collides a bit with #3892 and might need to be updated
when that one is merged.
Allow an explicit `as` conversion to convert between adapters and their
adapted types. Also make the value representation of an adapter be the
same as the value representation of the adapted type so that the
conversion is always possible.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Move completeness check to the point where the function is defined or
first called. This means we also defer deciding whether the function has
a return slot until that point. Instead of storing a return slot per
function, store the location of the return storage, which may or may not
be used, and compute and store a separate flag saying whether to use it
at the point of first use or definition.
This is the final piece in supporting simple `Make` functions in classes
as a replacement for constructors.
`i32` is retained as a special case for now, for bootstrapping purposes,
and maps to `BuiltinIntType`, which is distinct from `Core.Int(32)`.
This will be removed later once we support `Core.BigInt`.
For now this provides both the `iN` types and also the builtins to
support `Core.Int(N)`. The intent is that we'll change the `iN` support
to rewrite to calls here when we do that for the other type literals and
type keywords.
No conversions between integer types are supported yet, and all literals
are of type `i32`, so we can't actually form values of any of these new
types.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
LookupNameInDecl is only called from DeclNameStack, but I'm adding
mark_imports_used there because it feels more consistent. Not sure if we
want a better API boundary. I admit I'm also suspicious of its call to
LookupInCurrentScope but maybe it's okay due to how imports work.
I was choosing to print multiple diagnostics when a declaration is
previously used _and_ doesn't match because I think the "previously
used" is more important, but the "doesn't match" may give an additional
hint about why it didn't work.
The merge.h utility function is because I think we can follow a similar
model for identifying errors with other declarations: classes,
interfaces, etc.
This doesn't significantly change logic, although I'm trying to add the
location to used state.
The issue I'm trying to address is how to identify a declaration as
"allowed to be redeclared". Consider:
```
library "a" api;
extern fn F();
```
```
library "b" api;
extern fn F();
```
```
library "c" api;
import library "a";
import library "b";
var x: auto = F();
fn F();
```
What currently happens is:
1. On import of "a", `F` becomes ImportRefUnused
2. On import of "b", `F` becomes ImportRefUsed in order to merge.
3. In "c", the call `F()` doesn't change the state.
4. In "c", the declaration `fn F();` needs some breadcrumb to understand
whether "F" has been referenced, as in step (3) here.
What I want to happen is:
1. On import of "a", `F` becomes ImportRefUnloaded
2. On import of "b", `F` becomes ImportRefLoaded in order to merge.
3. In "c", the call `F()` causes `F` to become ImportRefUsed
4. In "c", the declaration `fn F();` detects that `F` is already
ImportRefUsed, and can use the associated `used_id` for a diagnostic
about why redeclaring is invalid.
Note this PR isn't implementing (4). I'm focused on the refactoring to
add a new ImportRef state here.
Just connecting this together. Note the diagnostics still need to be
cleaned up/improved, although this is correctly handling some cases.
This exposed an incorrect parameter passed in DiagnosticEmitter, which
is fixed here -- context_fn shouldn't include args. Note this was caught
by the CHECK, I'm just expanding on the message since I used the detail
to help figure out the bug.
These can't be supported by `TryEvalInst`, because we don't track
sufficient information about predecessors and branch conditions in SemIR
to efficiently compute the constant result. Even if we could do so, we
may not want to treat all `BlockArg`s for which we can infer a constant
value as being constants. Instead, set the constant value explicitly
after creating the corresponding `BlockArg` instruction.
This replaces all invalid node IDs in import_ref.cpp with references to
the imported instruction.
This splits out ReplaceInstBeforeConstantUse into a separate function
when the LocationId is replaced, as for splicing. That's the less common
case, whereas others would need to provide the LocationId in order just
to not change the value.
The purpose of this change is to allow something such as a FunctionDecl
instruction to note an imported instruction as the "loc_id". Note that
doesn't occur here: this change is already very sweeping in edits. There
is no testdata affected, intended to show equivalent behavior.
We might want to consolidate NodeId references towards LocationId, but
if that's preferred, I'd still like to split it out. A lot of this just
piping through LocationId where it's a build error otherwise, enough
that imports should be able to start using it for diagnostics.
ValueStores are added but still unused -- just flushing out structure
for review.
Restructuring SemIRLocation is necessary to use LocationId this way. For
TokenOnly, it's not getting used in Parse, so I migrated it to Check and
it's now specific to SemIRLocation.
I also considered making LocationId reference an InstId (which would
need to be an ImportRef) instead of an ImportIRInstId. However, that
would've required import.cpp to add instructions for decls which are
reached during resolution -- we typically don't have an inst ready for
use. An extra inst is essentially 16 bytes in InstId's ValueStore + 4
bytes in LocationId's ValueStore, whereas this is 8 bytes per.
As discussed around #3792, identify the import a diagnostic message came
from prior to the diagnostic message itself. This occurs during location
translation so that the logic can be central.
I'd considered associating the parse node with ImportRef instructions,
but I realized about halfway through that because I need to store the
ImportDirectiveId on the ImportIR for cross-package imports, it's there
for use in location translation without extra work. That saves a fair
amount of stringing it through declarations, as well as an oddity where
ImportRef instructions would have a node that didn't really represent
them.
Fix a collection of issues that were preventing lowering for overloaded
operators from working.
Instead of creating `import_ref` instructions during name lookup in the
current block, whatever that might be, we now create them in the `file`
block always. This avoids inserting them into blocks that might not be
intended to contain them, such as functions, and avoids the IR generated
for a function depending on which names we happen to have looked up
first.
When importing a class, function, or interface, import its enclosing
scope ID. This is necessary to allow us to distinguish between functions
at interface scope, which shouldn't be lowered, and other functions, and
will also be used in future to provide qualified names for declarations
when printing types. In order to support this:
- Track the constant values of namespaces created during importing so
that we can find them when resolving an import ref. Use those constant
values to convert an enclosing scope ID from the imported IR into a
corresponding ID in the current IR.
- Change how we do two-pass import of classes and namespaces so that we
can do two-pass import even for non-defining declarations, so that we
can import the enclosing scope.
While working on the final point above, I reworked `TryResolveInst` to
return a flag indicating whether another pass is necessary instead of
implicitly encoding this in the `ConstantId`. This permits the handling
of classes to be simplified; now `import_ir_constant_values` is only
accessed in a single place.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Note, I'm annotating the lookup partly so that the reason the conflict
comes up is clear, partly so that there's actually a diagnostic line
associated with the root cause as more tests get packed into a single
file.
I'd added these trying to catch cases where ImportRefUnused might be
returned, but I believe these are incorrect. Mistakes should still be
caught because an ImportRefUnused will lead to errors in other handling.
Removing the TryResolveImportRefUnused should clarify the semantics of
when an ImportRefUnused is expected.
This revamps the support for cross-package imports, making them look
more like a namespace. The planned model is mentioned on
[#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1217586076022210670).
This does not implement name lookup into the new namespace structure.
A few key changes in this PR (it's a little sprawling) are:
- Moves logic for adding package imports from context.* to import.*
- Remove SemIR::Import, which was the prior model. This is instead now a
SemIR::Namespace with the NameScope getting a new import_ir_scopes
field.
- Allow SemIR::Namespace to use Parse::ImportDirectiveId in addition to
the prior Parse::NamespaceId
- The import_ir_scopes field includes a NameScopeId so that as we
traverse to child namespaces, we can directly perform name lookup in the
other IR.
- is_closed_import now tracks whether a namespace comes from a different
package. This has a diagnostic implemented in decl_name_stack.
When a member access names an interface member, perform impl lookup to
find the impl and its corresponding member.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This was previously discussed at
https://discord.com/channels/655572317891461132/655578254970716160/1209975051588210729.
I'm initiating this mainly because we typically use "id" suffixes to
indicate an `IdBase` being passed around and the non-id suffix of
`parse_node` suggests at it carrying more data than it actually does.
There used to be more reason for avoiding `node_id` because
`SemIR::InstId` used to be named `NodeId`, but that's no longer
necessary. As a consequence, I'd like to rename `parse_node` to more
precisely reflect its type.
In full, this is doing:
```
parse_node_kind -> node_kind
parse_node -> node_id
ParseNodeCategory -> NodeCategory
ParseNodeKind -> NodeKind
ParseNode -> NodeId
```
This is primarily in check and sem_ir, but with some `parse_node_kind`
references in parse too.
Pluralization is consistent with name forms on both sides, so that
wasn't part of my replacements.
Add an instruction to hold the witness table, along with a corresponding
type to keep things simpler. Add `check/impl.{h,cpp}` to house the new
logic. No checking of impls against interfaces is performed yet.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
#3740 added another similar call. This may be temporary, maybe we'll
stop using and remove later, but it's a small simplification right now
and we might also retain a similar inst -> constant -> type flow.
`Self` is modeled as a `bind_symbolic_name` with no corresponding value,
for now at least. In the future it might make sense to model it as a new
kind of instruction, or as a `bind_symbolic_name` whose value is a
`param`, but for now we just want it to introduce a symbolic constant.
In order to convert a value like the `Self` of an interface to a type, a
new instruction `facet_type_access` is introduced. This notionally
accesses the "type" field within a facet, converting it from a pair of
(type, witness) into just the type.
When declaring an associated entity in an interface -- just associated
functions for now -- create an associated entity value and corresponding
type to represent a "slot in a witness table". Also track the list of
associated entities on the interface so that we will eventually be able
to check impls against them.
Associated entities are represented as the integer index of their slot
in a witness table.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
In `Class` we have:
```
// The following members always have values, and do not change throughout the
// lifetime of the class.
// The following members are set at the `{` of the class definition.
// The following members are accumulated throughout the class definition.
// The following members are set at the `}` of the class definition.
```
`Interface` has similar, minus the "accumulated" members. I'm echoing
this, except `Function` has no `}` members; at present, nothing
differentiates between "started definition" and "completed definition",
unlike the other two.
Also removing a slightly inconsistent default value for decl_id.
I'm proposing a different split, along the line of "what does this
relate to". I view impl.h as having started down this route. Moving the
inst store stuff to inst.h feels odd to me given how much else is there
right now, but maybe it's still the best approach. Some files only
contain a store, no structured class, but I felt the consistency in file
naming (without _store suffixes) might help.
By adding a constant to ClassDecl/InterfaceDecl, we're able to remove
name reference special-casing. Use TryEvalInst on the Decl to generate
the Type. For ClassDecl, then use the generated constant for
self_type_id.
Adds `BindAlias` with a hybrid of `BindName` and `NameRef` semantics. I
think it's slightly closer to `BindName` because it introduces a name,
so I'm going more in that direction. This also matches the need for
`bind_name_id` with imports on enclosing scopes.
Note, only things that look like a name reference are being allowed on
the RHS of `alias`. This includes builtins that look like name
references, such as `bool`, but not ones that turn into values
underneath, such as `false`.
- File::StringifyTypeExpr now has a case that hits the ImportRefUsed
TODO, so implementing that. I think the `static` approach will be
helpful in ensuring there aren't access bugs, particularly when future
support is added.
- `let` wasn't adding to exports because it doesn't use
`decl_name_stack` the way `var` does. This now adds to exports, but we
might want to unify logic for issues such as this.
- BuildImportRefUsedValueRepr is now called for another inst kind, and
it seemed like calling back to BuildValueRepr was the best way to
resolve this. I don't *think* that's going to cause recursion.
Richard Smith
Jon Ross-Perkins
Pablo Paglilla
