The SymbolicBindingType refers to the type value that will be
substituted in for the BindSymbolicName, but holds onto the EntityNameId
from the BindSymbolicName instead of (or in addition to, for now) the
instruction.
The EntityNameId will be used to look in the ScopeStack to find the
witnesses either from the BindSymbolicName instruction, or other
instructions that specify `impls` constraints against the EntityName.
This will allow us to have the `T` in `I(T)` resolve to a `.Self`
reference in the type so that we get type equality with the binding's
type: `T:! I(.Self)`.
This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):
```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";
// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```
That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.
The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.
A few alternatives considered were:
- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
When returning a value from a function whose return type has a by-copy
initializing representation, perform initialization like we do when the
return type has an in-place initializing representation. This makes our
SemIR representation more uniform, as the return expression will now
always be an initializing expression rather than a value expression, but
more importantly it means that attempts to return a non-copyable type by
value now fail, even if the type has a by-copy initializing
representation.
This catches a bunch of places where we were returning a value of an
unconstrained template parameter `T:! type`, which we were incorrectly
allowing because we didn't notice it was not copyable. Unfortunately
this then requires quite a few test updates.
Like #6034, this exposes a lowering issue where lowering crashes when
attempting to lower a specific copy operation for certain types; a
couple more tests are temporarily disabled here. An upcoming PR
dependent on this one will fix the issue and re-enable those tests.
Instead of hardcoding which types are copyable, add a `Core.Copy`
interface to perform copying. Move almost all the current copy support
to that interface. Some remaining pieces are still using builtin logic
after this PR:
* For tuples and structs, builtin logic is used to perform elementwise
copies. This also supports copying *adapters of* tuples and structs,
which seems like it may not be desirable, especially for non-extending
adapters. A `Copy` impl is provided for tuples of at most 2 elements, so
that `Core.Copy` constraints are satisfied, but we can't implement this
generally until we have variadics support, and don't yet have a
mechanism to generalize this to structs.
* For `enum` types imported from C++, builtin logic is used to perform a
copy. This is temporary until we have a mechanism to identify these
types from an impl in the prelude.
One lowering test in `toolchain/lower/testdata/class/generic.carbon` is
disabled for now, as it causes a crash in the lowering code due to an
ABI mismatch between the call signature in the lowered declaration of a
specific function and the call that is generated in the specific callee.
Fixing this is a little involved, and will be done in a separate PR.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This uses each vector's size as a barrier between lists, to eliminate
the possibility of incidental collisions between entries of different
lists. This is the same as is done inside `AddBlock`.
Following the direction of #5913, add support for parsing an `unsafe as`
operator. For now, we allow one additional conversion using `unsafe as`
beyond the conversions supported by `as`: we permit pointer conversions
that remove qualifiers, such as `const T*` -> `T*`.
Iterate over arrays by producing their elements in the obvious way. We
use `i32` as the cursor type because that's the type that check converts
array indexes to. This may need revisiting if we support arrays with
more than 2Bi elements.
Also includes a fix for an import crash bug that's triggered by this
change, borrowed from #5873.
This is in anticipation of having `class` depending on the `Destroy`
interface, in order to automatically generate implementations of it.
I'm doing some sorting of imports in the prelude too, which I hope will
be uncontroversial; clang-format would do similar in C++...
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
Use `full.carbon` min-prelude for any tests using the full prelude. A
few tests were using it unnecessarily and are changed to a more minimal
one in the process.
Any test which does not include some min-prelude will now fail with an
error.
This changes `Destroy` to use an interface for its implementation.
Note that this change includes a lot of test updates. Even when
`Destroy` is a no-op, it still causes code generation as part of
determining that.
Originally I was trying to use ranges to cut down the scope of this, and
to a degree I think they have. But a flipside here is that cases where
no destructors should be generated -- particularly globals -- would be
needed to completely remove destructor calls. Even for ranges, the range
can often include the destructor placement. So I've shifted
frame-of-thought a little: accept a bunch of destructor churn, because
destructors are needed and will be prevalent. The verbosity is a feature
of the design to make desugaring apparent in IR, not a bug.
Suggested by zygoloid while looking at #5678
```
CHECK failure at toolchain/lower/context.cpp:62: !llvm::verifyModule(*llvm_module_, &errs): Verifier errors: Instruction does not dominate all uses!
%.loc17_46.1.temp = alloca { i1, i32, i32 }, align 8, !dbg !13
%tuple.elem0.loc17_46.2.tuple.elem = getelementptr inbounds nuw { i1, i32, i32 }, ptr %.loc17_46.1.temp, i32 0, i32 0, !dbg !13
Instruction does not dominate all uses!
%.loc17_46.1.temp = alloca { i1, i32, i32 }, align 8, !dbg !13
%tuple.elem1.loc17_46.2.tuple.elem = getelementptr inbounds nuw { i1, i32, i32 }, ptr %.loc17_46.1.temp, i32 0, i32 1, !dbg !13
Instruction does not dominate all uses!
%.loc17_46.1.temp = alloca { i1, i32, i32 }, align 8, !dbg !13
%tuple.elem2.loc17_46.2.tuple.elem = getelementptr inbounds nuw { i1, i32, i32 }, ptr %.loc17_46.1.temp, i32 0, i32 2, !dbg !13
```
Adds a `--llvm-verifier` flag to be able to turn this off easily,
particularly for debugging the LLVM IR.
The call workaround is due to a verifier requirement `inlinable function
call in a function with debug info must have a !dbg location`. It
specifically comes up for the `++x` case, with `%1 = call i32
@"_CConvert.8b3d5d6a6c17be04:ImplicitAs.Core.b88d1103f417c6d4"(i32
%other)`. I think #5397 is in the direction of a fix for that, but #5397
was set aside because it puts the debug info in too many places.
Instead, address this by adding a stub location for calls that don't
have a good location. I'm deliberately putting this next to the TODO so
that it's easier to understand the association.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Previously we created allocas for temporaries at whatever point in the
output LLVM function we'd reached. This would result in these being
dynamic allocas (performing a dynamic stack allocation), which is
inefficent and can lead to a stack overflow if it happens in a loop.
Switch to putting the allocas in the entry block instead, and instead
generate a lifetime start marker when we reach the point where the
temporary is introduced. We already did this for local variables; this
is just factoring out and reusing that code.
The `full.carbon` prelude just sets a flag indicating an explicit intent
to include the full prelude. Once all tests include some prelude file,
an error can be enabled (currently it's commented out) that requires an
`INCLUDE-FILE` of some min-prelude to be present in all `check/` and
`lower/` file tests.
Adds min-preludes more tests which were seen as slow and their
surrounding neighbours. This drops the file_test runtime on my machine
from about 6s to about 4.5s.
For a few files that are clearly only testing diagnostics, we drop the
if-present semir ranges and the associated TODO.
Replace the binary `Operation` interfaces with the `OperationWith(T:!
type)` interfaces described in the design, and add a `Result` associated
type for both unary and binary operations. Update the `impl`s in the
prelude for integer types to use the new form, including supporting
implicit conversion of either operand.
I've tried to split this PR up into commits focused on distinct changes
for review convenience. It may be simplest to review it one commit at a
time.
`IRBuilderBase::SetInsertPoint` weirdly replaces our debug location with
one copied from the new insertion point, so undo its damage after
calling it.
Also included: a couple of cleanups I made while tracking this down.
- The actual reason I started this: minor lowering updates in the golden
LLVM IR
- Process.inc changed enough to need a patch context update.
- https://github.com/llvm/llvm-project/pull/123126 added `proto_library`
uses without a `load`, which is broken in bazel 8
- Just commenting these out because we don't use them. I'll follow up
separately about a possible fix, but continuing to use `WORKSPACE` is a
bigger issue LLVM probably should address.
- Note this update is also triggering removal of `migrate_cpp`, in #4887
Make `int.snegate` ignore the signedness of its operand and
unconditionally check for signed overflow like all the other `int.s*`
builtins do. Fix the prelude implementation of unary `-` for `Core.UInt`
to use `int.unegate` instead of `int.snegate`.
Fix the test for unsigned negate to actually test negating unsigned
integers, and add some tests that unary `-` also works.
We were mistakenly using the signed builtins, which produce the same
lowering for add/multiply right now, but don't for division and modulus.
When manually flipping SignedOverflowIsUB on, the signed version of add
gains the nsw (no signed wrap) flag, while the unsigned version
(correctly after this change) does not:
```
// CHECK:STDOUT: define i32 @_Cadd_i32.Main(i32 %a, i32 %b) !dbg !4 {
// CHECK:STDOUT: entry:
// CHECK:STDOUT: %int.sadd = add nsw i32 %a, %b, !dbg !7
// CHECK:STDOUT: ret i32 %int.sadd, !dbg !8
// CHECK:STDOUT: }
// CHECK:STDOUT:
// CHECK:STDOUT: define i32 @_Cadd_u32.Main(i32 %a, i32 %b) !dbg !9 {
// CHECK:STDOUT: entry:
// CHECK:STDOUT: %int.uadd = add i32 %a, %b, !dbg !10
// CHECK:STDOUT: ret i32 %int.uadd, !dbg !11
// CHECK:STDOUT: }
```
Non-entry-block allocas will allocate new stack memory each time they're
reached, resulting in leaking stack memory over time for allocas in a
loop. Move all such allocas to the entry block instead, and use an LLVM
intrinsic to mark when the lifetime of the variable actually begins.
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When an `IntLiteral` appears as an operand of an `if` expression,
convert it to `i32` for now, so that we don't reject things like `if
cond then 1 else 2` due to having a non-constant value of type
`IntLiteral`.
For tuple indexing expressions such as `(a, b).0`, convert the index to
type `IntLiteral`, not to type `i32`. This isn't strictly necessary to
do in this PR, but avoids the need to provide an `IntLiteral` -> `i32`
implicit conversion for `no_prelude` tests using this syntax.
This seems to be enough to avoid naming collisions for functions in any
of the current test cases (verified by asserting that the name of the
`llvm::Function` matches the name passed to create it - not triggering
LLVM's numbering that happens when names collide)
It currently implements mangling for namespace scopes, class scopes, and
impls.
Nothing generic is mangled yet - haven't looked at how that works,
though evidently it's not covered by existing testing, I guess.
Follow-up change will document the current mangling algorithm in
`toolchain/docs/lower.md`
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
There's not much mangling happening yet - but Run -> main (and some
overloading numbering happening, maybe LLVM is doing that 'helpfully'
under the hood?) is enough to demonstrate this improvement/fix.
Ah, here it is:
```
#0 llvm::ValueSymbolTable::makeUniqueName (this=0x50287fe5b6c0, V=0x50287fe827e8, UniqueName="F") at external/_main~llvm_project~llvm-project/llvm/lib/IR/ValueSymbolTable.cpp:45
#1 0x000055555c40f964 in llvm::ValueSymbolTable::reinsertValue (this=0x50287fe5b6c0, V=0x50287fe827e8) at external/_main~llvm_project~llvm-project/llvm/lib/IR/ValueSymbolTable.cpp:100
#2 0x000055555c2a91df in llvm::SymbolTableListTraits<llvm::Function>::addNodeToList (this=0x50287fd16f18, V=0x50287fe827e8) at external/_main~llvm_project~llvm-project/llvm/lib/IR/SymbolTableListTraitsImpl.h:75
#3 0x000055555c2a90e5 in llvm::iplist_impl<llvm::simple_ilist<llvm::Function>, llvm::SymbolTableListTraits<llvm::Function> >::insert (this=0x50287fd16f18, where=..., New=0x50287fe827e8)
at external/_main~llvm_project~llvm-project/llvm/include/llvm/ADT/ilist.h:166
#4 0x000055555c27fef2 in llvm::iplist_impl<llvm::simple_ilist<llvm::Function>, llvm::SymbolTableListTraits<llvm::Function> >::push_back (this=0x50287fd16f18, val=0x50287fe827e8) at external/_main~llvm_project~llvm-project/llvm/include/llvm/ADT/ilist.h:250
#5 0x000055555c27faeb in llvm::Function::Function (this=0x50287fe827e8, Ty=0x50287fd43058, Linkage=llvm::GlobalValue::ExternalLinkage, AddrSpace=0, name="F", ParentModule=0x50287fd16f00) at external/_main~llvm_project~llvm-project/llvm/lib/IR/Function.cpp:521
#6 0x0000555559441f95 in llvm::Function::Create (Ty=0x50287fd43058, Linkage=llvm::GlobalValue::ExternalLinkage, AddrSpace=0, N="F", M=0x50287fd16f00) at external/_main~llvm_project~llvm-project/llvm/include/llvm/IR/Function.h:175
#7 0x000055555c27ebac in llvm::Function::Create (Ty=0x50287fd43058, Linkage=llvm::GlobalValue::ExternalLinkage, N="F", M=...) at external/_main~llvm_project~llvm-project/llvm/lib/IR/Function.cpp:398
#8 0x0000555558ce7bb5 in Carbon::Lower::FileContext::BuildFunctionDecl (this=0x7fffffffc438, function_id=...) at toolchain/lower/file_context.cpp:257
```
That's where LLVM decides to make a new name (name.number) when asked to
create a new global with the same name as an existing global.
It's not a valid mangling scheme - since the name won't be stable
between different compilations, but it is enough to make
single-compilation code build/run for now.
Seems to work with lldb ( https://pastebin.com/igKkNECm ), though gdb
has /some/ trouble with the paths (they aren't complete - just using the
filename directly, not providing the working directory - might be some
quick hacks that can help there).
Refactors a bunch of the SemIRDiagnosticConverter to be able to use that
from Lower to access source locations there to use in debug info.
I assume some of this is a bit jank/would need to be fixed/improved in
the future - like the context functor that's passed into ConvertLoc?
(not totally clear what that's for/what the debug info will be missing
out on in its absence, I could throw a FIXME in there if you like)
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Still doesn't have line tables, so of limited value (at least now
this'll be enough that LLVM really generates debug info into the
resulting object file (whereas with only the compilation unit metadata,
LLVM will consider it empty and avoid emitting any of it)) - but another
step along the path.
This also doesn't attach the right source location to the functions -
I'll do that in a follow-up change because I think it'll require the
majority of the refactoring between driver and check to extract the
essential functionality sem_ir_diagnostic_converter, I think, to allow
retrieving source locations during lowering.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This adds just the debug info metadata for Compilation Units (the top
level container of debug info) - but without anything in them, LLVM
won't emit them at all, so while this is testable at the IR level, it
isn't observable at the object level until more debug info is added.
A couple of starting points in this patch:
* A flag (`--debug-info`, seems to match the naming/style of other flags
in the carbon driver, though this is different from the naming
conventions of clang/gcc) that enables debug info when lowering. Open to
other names/approaches (on by default? historically debug info's been to
large/expensive to do this, so sticking with that precedent for now).
* Enabling that flag by default in the lowering tests - I do find the
churn on golden tests a bit rough, and adding more features to all the
tests means more churn, but it seems consistent with the approach so far
- keep an eye on this and perhaps revisit this if the churn gets too
annoying
---------
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
Note, I assume this doesn't affect all the TODOs (like for i32.carbon),
but does cut some things down (and requires updating some tests that
have prelude name conflicts, but I think they were intended to be
updated this way).
Change syntax for package declaration to put the `impl` keyword at the
start and remove the `api` keyword.
To support this, rearrange processing of package, library, and import
declarations to use the general modifier handling support in declaration
parsing rather than special-case logic.
There is an ambiguity in `impl package.Foo as Bar`, which we resolve by
treating `package` as an introducer after a modifier only if it's not
followed by `.`.
Change the names for emitted globals for constants with storage to
include both the name of the constant and the name of the use.
This causes the instructions to also be named in SemIR and in LLVM IR
constants.
Make constant emission non-recursive, and stop building a bogus
FunctionContext to emit constants.
To support this, move `InstConstantKind` from the typed instruction
definition into the `.def` file, and add more macros to allow us to
generate case labels based on whether an instruction is a constant.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
First steps towards using constant values in lowering.
For now, we reuse the regular instruction lowering to lower constants.
This mostly works, because we don't actually need an `llvm::Function` or
a current basic block when lowering a constant most of the time.
However, a special case is needed for lowering aggregate value constants
because they would otherwise create a stack alloca to store the
constant. Separate constant lowering code will be added in a future
change to clean this up.
When lowering a constant initializing expression, the result is a value
of the destination type, rather than code to initialize the destination,
so a separate copy step is required when finishing initialization from a
constant for a type that uses in-place initialization. Handling this
required extending `ReturnExpr` to track its destination location.
We currently often create non-constant `*_access` SemIR instructions
that are only used by constant `*_init` instructions. These cause
lowering to leave behind `getelementptr` instructions in the lowered IR
that are now unused. It should be possible to detect this case and avoid
producing these instructions, or to produce them lazily, but for now
we're just leaving them around for LLVM to clean up.
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
Fix a collection of issues that were preventing lowering for overloaded
operators from working.
Instead of creating `import_ref` instructions during name lookup in the
current block, whatever that might be, we now create them in the `file`
block always. This avoids inserting them into blocks that might not be
intended to contain them, such as functions, and avoids the IR generated
for a function depending on which names we happen to have looked up
first.
When importing a class, function, or interface, import its enclosing
scope ID. This is necessary to allow us to distinguish between functions
at interface scope, which shouldn't be lowered, and other functions, and
will also be used in future to provide qualified names for declarations
when printing types. In order to support this:
- Track the constant values of namespaces created during importing so
that we can find them when resolving an import ref. Use those constant
values to convert an enclosing scope ID from the imported IR into a
corresponding ID in the current IR.
- Change how we do two-pass import of classes and namespaces so that we
can do two-pass import even for non-defining declarations, so that we
can import the enclosing scope.
While working on the final point above, I reworked `TryResolveInst` to
return a flag indicating whether another pass is necessary instead of
implicitly encoding this in the `ConstantId`. This permits the handling
of classes to be simplified; now `import_ir_constant_values` is only
accessed in a single place.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
If the initializing representation is the same as the value
representation, don't materialize a temporary and perform a value
binding. Instead, directly extract the value, using a new
`value_of_initializer` node.
This removes a lot of redundant `alloca`s from our generated LLVM IR.
This implements initializing expression semantics for structs and
tuples, following #2006 and discussions since.
Tuple and (and analogously, struct) literals are treated as having a
mixed expression category that is later resolved based on how the
literal is used, as either a tuple initializer or a tuple value, at
which point we create a `TupleInit` or `TupleValue` that represents the
formation of the tuple initializer or tuple value from the tuple
literal.
There's quite a lot of TODOs here, and the SemIR representation is still
not quite right, but this seems like a good place to checkpoint some
incremental progress.
IntegerLiterals are not signed, so get the zero-extended value rather
than the sign-extended value. Sometimes we use the high bit of the
`APInt`, though currently this only happens for the literals 8 and 9 due
to the way we convert decimal integers to binary.
Dana Jansens
Jon Ross-PerkinsandDana Jansens
Richard Smith
Chandler Carruth
josh11bandJosh L
David BlaikieandJon Ross-Perkins
