Commit Graph
18 Commits
Author SHA1 Message Date
Dana Jansens 9fb428d713 Ensure specific in ImplWitness has resolved definition before accessing witness table (#8040)
When impl lookup results in an `ImplWitness`, either directly or later
through `LookupImplWitness` evaluating to an `ImplWitness` inside some
specific, it represents a dependency on the eval blocks of the
`ImplDecl` that the `ImplWitness` comes from. The `ImplWitness` contains
a `SpecificId` of the `ImplDecl`, and the constants in the witness table
must be viewed through that `SpecificId`. The constants may depend on
the declaration or the definition block of the `ImplDecl`'s specific, so
any use of the witness table from `ImplWitness` requires the specific
from the `ImplWitness` to be fully resolved: both the decl and
definition blocks.

The specific declaration block is always resolved immediately when
forming a specific id, so there's nothing to do there. And things are
simple when the `ImplWitness` returned from impl lookup is concrete. We
would simply resolve the specific definition directly in the evaluation
of `LookupImplWitness`.

But when the `ImplWitness` is symbolic, meaning there's a dependency on
generic parameters in its referenced specific, then we have a dependency
on resolving the specific definition in the `ImplWitness` for every
specific that gets applied to the `ImplWitness`, eventually resulting in
a concrete specific.

Previously we attempted to do this by representing a dependency edge
from the eval block containing the `ImplWitness` instruction to the
definition block of the specific inside the `ImplWitness`. We
represented this dependency edge with the `RequireSpecificDefinition`
instruction.

The challenge with the `RequireSpecificDefinition` instruction was
ensuring it always landed in the _same eval block_ as the one holding
the symbolic `ImplWitness`. Ultimately, we've found a way to do this
without the `RequireSpecificDefinition`. The witness table is accessed
through `ImplWitnessAccess`, so we resolve the specific definition
before each access to the witness table. If the definition is already
resolved, this just costs a lookup of the Specific from the value store.

We document the other things we tried, which don't work or were too
complex, below.

In PR #6236, we added the `RequireSpecificDefinition` instruction in the
eval of `LookupImplWitness`, but this is too late. If impl lookup
resolved to a symbolic `LookupImplWitness`, the `LookupImplWitness` is
added some eval block. Later, we form specifics and re-evaluate that
eval block, and the `LookupImplWitness` can evaluate to an
`ImplWitness`. Adding the `RequireSpecificDefinition` instruction at
this point inserts the instruction into whatever generic's eval block
happens to be on the top of the generic stack, not the eval block of the
generic we are building a specific for. And indeed we can't add
instructions to a generic's eval block later like this, as it would be
missing from specifics that were already resolved for the generic. This
incorrect insertion shows up as a crash in eval at the CHECK introduced
but commented out in [eval.cpp in
#7981](https://github.com/carbon-language/carbon-lang/blob/56d9bbc40add1e9263f2f9b2555c3a27292d1725/toolchain/check/eval.cpp#L3507-L3512).
This is covered by the
`require_specific_impl_definition_through_specific_instantiation.carbon`
test.

We tried moving the insertion of `RequireSpecificDefinition` to be
earlier - at the point where the `LookupImplWitness` is constructed, in
the `LookupImplWitness()` function, instead of inside evaluation. This
seemed like a straightforwardly correct answer, as the eval block that
contains the `LookupImplWitness` will then also contain the
`RequireSpecificDefinition`. However, this can cause us to lose the
`RequireSpecificDefinition` entirely. Because it's a separate
instruction, not an operand of `LookupImplWitness`, it does not get
treated as a dependency of the witness. When we do an impl lookup inside
an `alias`, we build a generic for the alias and then discard it. This
discards the eval block containing the `LookupImplWitness`. Then, in an
enclosing generic, we refer to the constructed `AliasDecl` instruction,
which pulls all its dependent operands into the enclosing eval block.
This pulls in the `LookupImplWitness` into the enclosing eval block, but
it does not preserve the `RequireSpecificDefinition`. This is covered by
the
`require_specific_impl_definition_from_lookup_impl_witness_in_class_definition.carbon`
test.

We tried having `ImplWitness` evaluation resolve the specific definition
of the specific `ImplDecl` it refers to. This seems like the simplest
approach by far as we should always be working with the correct eval
block and nothing can get lost. However it does not work because of the
recursive nature of `ImplWitness`. The `ImplWitness` instruction appears
in the declaration of an `ImplDecl`, and the `ImplWitness` holds a
`SpecificId` for that same `ImplDecl`. When building a specific
`ImplDecl`, we evaluate the `ImplWitness` in the `ImplDecl`'s
declaration block which then immediately resolves the specific
definition before the declaration is finished. This leads to missing
instructions in the specific definition. In short, this puts the
dependency edge to the `ImplDecl`'s specific inside the `ImplDecl`
itself, which is problematic.

We tried wrapping `ImplWitness` in another instruction,
`ImplWitnessUse`. Inside the `ImplDecl` declaration there is still
`ImplWitness`, but then in the definition there is `ImplWitnessUse` and
that is what is returned from the evaluation of `LookupImplWitness`. The
`ImplWitnessUse` is an `ImplWitness` plus it ensures the specific
referred to by the witness has its definition resolved. However this
breaks constant comparisons, as we get different witnesses inside an
impl versus outside.

The first iteration of this PR's solution had us insert the
`RequireSpecificDefinition` into the eval block when we sniffed a
`LookupImplWitness` instruction, however that missed cases where impl
lookup immediately resolved to a symbolic `ImplWitness`, which is why we
now sniff for the `ImplWitness` in the eval block. This is covered by
the
`require_specific_impl_definition_from_symbolic_impl_in_class_definition.carbon`
test.

We also originally made a mistake of not inserting
`RequireSpecificDefinition` when inside the impl definition that the
`ImplWitness` refers to. But we can form specifics ImplWitness values
through function signatures, and these must add the dependency edge on
that specific ImplDecl definition. This is covered by the
`require_specific_impl_definition_from_inside_impl_definition.carbon`
test.

Finally, we did have a working solution. It was to sniff instructions
added to the eval block of a generic, and when an `ImplWitness` is added
to the eval block (it is implied that it is symbolic), also add a
`RequireSpecificDefinition` to that eval block immediately. We also
resolved the definition of a specific referred to by `ImplWitness` when
`LookupImplWitness` evaluates to `ImplWitness` to cover the concrete
witness case. This complicated the construction of the eval block
immensely, however. It caused a situation where adding one inst to the
eval block actually adds two, which we needed to avoid when importing.
And it required inst-kind specific behaviour in the very general
construction of an eval block, completely outside of eval itself.
2026-11-03 14:15:14 +00:00
Christopher Di Bella 05a7ecbd34 Move SubobjectDestroy and SelfDestruct out of interface Destroy (#7942)
Determining that a type has trivial destruction requires checking
whether all of its subobjects have trivial destruction and whether its
type has a custom witness for `Destroy.Op`. This isn't possible when
`Destroy` is the custodian for `Destroy.Op` and `SubobjectDestroy.Op`,
so we need to make `SubobjectDestroy` its own interface.

`Destroy.SelfDestruct` becomes a standalone function because it depends
on `SubobjectDestroy` and `Destroy` being implemented, and is also
responsible for generating any custom witnesses for both interfaces.
Making `SelfDestruct` an interface was experimented with, but this
required a blanket impl that caused issues for facet types.

`Destroy` depends on `SubobjectDestroy` to be implemented. We'd ideally
use `require impls SubobjectDestroy`, but it isn't complete yet, and it
also causes problems when `Destroy` is implemented inside the class
definition. We work around this by temporarily renaming the `Destroy`
interface to `DestroyImpl`, and introducing a constraint called
`Destroy` so that user code doesn't need to write `Core.SubobjectDestroy
& Core.Destroy`.
2026-10-26 21:35:01 +00:00
Dana Jansens 24766e213e Defer evaluation of witnesses substituted while identifying a facet type (#7930)
When identifying a facet type, defer evaluation of LookupImplWitnesses
by redirecting them to evaluate into IdentifiedWitness. Then the caller
of identify will need to substitute the IdentifiedWitnesses, either with
witnesses of their own, or with LookupImplWitness to cause a lookup
operation.

This allows:
- An `impl as` on a named constraint can subst the witnesses in
designators from the named constraint with a witness to the impl itself.
This prevents them from looking for and finding some other overlapping
impl. (This PR)
- Impl lookup to collect rewrite/equality requirements from all named
constraints and then use the impls it has already found to evaluate any
designators in those requirements instead of performing impl lookup
again (creating a cycle). (Done in
https://github.com/carbon-language/carbon-lang/pull/7944)
- Similarly, an `impl as` can collect impls and equality requirements
from all named constraints and verify them correctly by replacing
witnesses that should refer to the impl with the correct witness instead
of performing a lookup and finding an overlapping impl. (Done in
https://github.com/carbon-language/carbon-lang/pull/7937)
- ImplWitnessAccess to be able to find rewrites from a named constraint,
not just from the initial DeclaredFacetType. (TBD)

To do this we need to introduce the concept of "identified" specifics.
In order to identify a facet type, we must construct a specific for each
require decl in a named constraint. These specifics will have
IdentifiedWitnesses inside them, but their args would otherwise match a
specific for the require decl constructed in another context. To avoid
polluting the canonical specific namespace, we introduce a second
namespace of specifics that are "identified" since they are created by
identifying.

As we have introduced a new global state that modifies eval behaviour,
we must disable that state when resolving a specific (as per
https://github.com/carbon-language/carbon-lang/pull/7923). But inside an
"identified" specific, we preserve the behaviour so that the witnesses
modified by identify (through SubstPeriodSelf or through evaluating a
require specific) have their evaluation deferred.
2026-10-14 14:12:56 +00:00
Nicholas Bishop 4a8993af2d Fix "<unexpected>" inst when creating an InitializeAction (#7900)
Add the storage access block to `InitializeAction`, and then insert that
block when performing the action.
2026-10-07 01:10:33 +00:00
Nicholas Bishop a65c3680ff Special case formatting of None insts in a specific (#7882)
A specific's definition block may contain `InstId::None`, indicating it
has no constant value. Display this as `<not constant>` instead of
`invalid`, to avoid it sounding like an error.
2026-10-01 20:17:55 +00:00
Richard Smith d4c7ca4221 Support for dependent initialization in templates (#7801)
Add support for deferring initialization as a template action, and
performing the deferred initialization during template instantiation.

This is substantially more complex than other conversion actions, for
two primary reasons:

* The initializer in the generic may have storage arguments as inputs.
We model an initializing expression as having a "slot" where
initialization writes the location that should be initialized by that
initializing expression, and that needs to be an output of the
initialization action.
* Initialization from a tuple or struct literal needs to recurse into
that literal, and the literal will have been spelled in the generic,
meaning we don't have an `InstId` that can be used to name the specific
version of the initializer as input for nested conversions.

These issues are addressed by introducing two new features to the action
machinery:

In addition to `InstAction`, we now have `MultiInstAction`, which is an
action that produces a tuple of instruction values instead of a single
instruction value. Initialization actions produce one instruction for
the final result, which is spliced at the point of initialization, plus
one instruction for each storage argument, which are spliced into the
storage argument slots in the original generic. During initialization,
if we find one of those splices in the storage argument of an
initializing expression, we return the new storage argument back to the
initialization action to be included in the specific, instead of
overwriting the storage argument in the generic.

Actions whose `PerforrmAction` takes a `SpecificId` as input no longer
perform automatic refinement of their operands to specific instructions.
Instead, the action is given control over when and where it performs
that refinement. In `InitializeAction`, we use this freedom to form a
`SpecificInst` for the initializer in the primary output block, and form
a `SpecificInst` for the target in the target block. When detecting
whether we are initializing from a tuple or struct literal, we step over
the `SpecificInst` and track its `SpecificId`, and if necessary create a
new `SpecificInst` wrapping the sub-initializer when we recurse into the
nested element conversion.

Assisted-by: Claude and Gemini via Antigravity
2026-09-24 23:10:18 +00:00
Christopher Di Bella f7cd39428e Add Destroy.SubobjectDestroy as a temporary replacement for Destroy.Op (#7773)
This change partially implements [PR #7362], which revises how objects
are destroyed. It is a partial implementation for two reasons:

1. This change moves `Destroy.Op`'s current behaviour into
`Destroy.SubobjectDestroy`, but it doesn't add support for objects with
non-trivial destruction.
2. `Destroy.SubobjectDestroy` is a workaround for `require impls
SubobjectDestroy`. We aren't able to use the latter until the dependents
add their requirements' implementations to their own witness tables.

[PR #7362]: https://github.com/carbon-language/carbon-lang/pulls/7362
2026-09-24 00:06:28 +00:00
Dana Jansens fcae9610bd Make SemIR::TypeType be an empty FacetType instruction (#7813)
The type `type` is now a `FacetType` inst with no constraints. This
brings the model implemented in the toolchain into better alignment with
the language design. The `SemIR::TypeType` struct remains as a scope for
holding the `TypeInstId`, `ConstantId`, and `TypeId` constants, but is
not an `InstKind` anymore.

The `TypeType` inst looks a lot like singletons, but there are many
`FacetType` insts so it doesn't quite fit that model. So we put it
alongside singletons with a fixed inst id but refer to it as a more
general "builtin" inst that is not a singleton.
`Namespace::PackageInstId` is similar, and we group it with `TypeType`
conceptually as another builtin instruction with a fixed id.

No conversion is needed anymore to use a `type` as a facet, since types
also have a `FacetType` type. This simplifies and removes a number of
helpers and branches throughout the code.

The `TypeType` inst is now part of the constant store, so we end up
printing it in the constants block in every test. But it's also named
`type` rather than `%type` to preserve the majority of existing
formatting behaviour, though this does look different from other
constants.

Assisted-by: Opus 5 was used to generate a first draft and validate the
refactoring. Though nearly everything non-trivial the tool wrote has
been modified or rewritten.
2026-09-22 15:04:40 +00:00
Richard Smith 59c1d6ff39 Remove refine_inst_action and its splices. (#7769)
This action was created to wrap any `MetaInstId` operand of an action
instruction. This served two purposes:

1) It had a special hook in `OperandIsDependent` to allow it to be
   performed while it had a dependent operand (the reference to the
   instruction in the generic).
2) It created a `specific_inst` so that the downstream action saw an
   instruction in the specific instead of one in the generic.

These are both replaced: the special case in `OperandIsDependent` for
`RefineInstAction` is replaced by a special case for `MetaInstId`s in
general, and the `SpecificInst` is now created as part of performing the
downstream action, rather than as a separate step carried out
beforehand.

This simplifies the produced SemIR and reduces the number of splices
significantly. It also prepares us to handle actions like
initialization, where we don't actually want to create `SpecificInst`s
immediately in the location where the action is performed, because they
actually belong somewhere else in the IR.

Assisted-by: Claude Opus 5 and Gemini via Antigravity
2026-09-16 01:21:00 +00:00
Richard Smith 5a07a14fe9 Support for lowering templates (#7727)
Add basic support for lowering templates: we can now lower `SpliceInst`
in the case where the generic and specific are from the same file (and
we don't support importing templates from other files yet in general).
In order for this to work, lowering needs to be able to query the
expression category, and to handle instructions that appear to be
(template) constants in the generic but turn out to be non-constant in
the specific, so support for that is added.

Switch `type_of_inst` from being added as an action inst to being added
as a normal inst, since it's not an action and the old approach led to a
crash in lowering.
2026-09-08 18:39:57 +00:00
Richard Smith 812cc1e032 Add SpecificInst to represent a specific version of a template-dependent instruction (#7726)
Replace `refine_type_action` with `refine_inst_action`, and generate a
`specific_inst` instead of an `as_compatible` to represent the specific
version of an instruction that's used as an input to a template action.
This gives us a place to handle other properties of the instruction that
might vary from generic to specific beyond its type, such as its
constant value and its expression category.

For now, we provide a non-template-dependent constant value to the
`specific_inst` in addition to the non-template-dependent type we have
traditionally provided. This doesn't seem to matter for any current
actions, but sets us up to better handle future actions. The
`specific_inst` representation also allows downstream consumers of the
instruction to track which specific they should be requesting
information from. Providing a correct expression category for
`specific_inst` will be handled in a future PR.
2026-09-08 16:01:09 +00:00
Nicholas Bishop 27849b385c Add TemplateInst and drop CallCppTemplateAction (#7689)
`TemplateInst` wraps another inst. If that inst is symbolic, it is
treated as a template by `OperandDependence`.

Use this to replace `CallCppTemplateAction` with the more general
`CallAction`.
2026-09-03 17:45:47 +00:00
Richard Smith 2209a3477e Step through splices when checking for a bound method. (#7700)
`GetCallee` is sometimes called on a spliced instruction, and is
checking its exact inst operand to see if it's a `BoundMethod`. This
fails if the `BoundMethod` is wrapped in another instruction, such as a
splice. Normally our approach for such a situation would be to
constant-evaluate the operand, but that doesn't work here because the
`BoundMethod` will be non-constant if its bound `self` is. So instead we
now step through splice instructions manually when looking for the
`BoundMethod`.
2026-09-02 15:19:59 +00:00
Nicholas Bishop f519cccaf2 Add CallAction to allow deferring calls (#7682)
Calls with template callee or args can now be deferred via an
InstAction. This allows code like this to check:

```carbon
import Cpp inline '''
template<typename T>
struct C {};
''';

fn F(generic T: type) {
  let unused c: Cpp.C(T) = Cpp.C(T).C();
}
```
2026-08-28 18:00:58 +00:00
Nicholas Bishop 0745bda899 Support using Carbon generic types as C++ template parameters (#7673)
Example:
```carbon
import Cpp library "<vector>";

class C(T: type) {
  var v: Cpp.std.vector(T);
}

inline Cpp '''
void F() {
  Carbon::C<int> c;
  c.v.push_back(123);
  std::cout << c.v.back() << std::endl;
}
''';
```

A new `CallCppTemplateAction` is used to delay performing the C++
template call until non-symbolic arguments are known.
2026-08-24 18:53:24 +00:00
Chandler Carruth 8be274cf60 Replace :! binding syntax with phase keywords and contextual defaults (#7479)
Implement the toolchain side of proposal #7254, removing the `:!`
binding
syntax for generic and template parameters in favor of the keywords
`generic`,
`template`, and `runtime` plus contextual defaults for phase.

For valid programs this is semantics-preserving: each binding resolves
to the
same phase, and produces the same SemIR, as it did under `:!`/`:`. The
parser
derives a binding's phase from its syntactic context plus any explicit
phase
keyword; new diagnostics and error recovery for misused keywords are
described
below.

Implementation details for each component:

- Lexer: remove the `:!` (`ColonExclaim`) token, move its virtual
parse-node
  budget onto `:`, and add the `generic` and `runtime` keywords.
- Parser: thread a `BindingContext` (`ExplicitParam`, `DeducedParam`, or
`CompileTimeEntityParam`) from declaration introducers down through
parameter
lists to each binding pattern, using a one-token lookahead to
distinguish a
name-qualifier parameter list from a declaration's own final list.
Parameters
of a compile-time entity (`class`, `interface`, `constraint`, `choice`,
`alias`, `export`, `namespace`) and deduced `[]` parameters default to
checked
generic; explicit function parameters and local bindings default to
runtime.
`HandleBindingPattern` resolves the phase from that context plus the
keyword: a
`generic` keyword needs no node of its own (the phase is carried by the
  binding's node kind), while a `runtime` keyword is preserved as a
`RuntimeBindingName` node so `check` can name it in a diagnostic. A
phase
keyword that is merely redundant with the contextual default is
diagnosed
  here, without invalidating the parse tree.
- Check: a phase keyword that is invalid for its context (for example
`runtime`
on a checked-generic parameter) is diagnosed here, and recovers by
building an
error binding that still introduces the name so that later uses of it do
not
  produce cascading errors.

The removed `:!` syntax is now rejected as an ordinary parse error.

The `form`/`:?`/`->?` ("extended types") portion of proposal #7254 is
left for a
separate change.

Assisted-by: Claude Code
2026-07-11 01:22:44 +00:00
fdb188ccfd Implement unused pattern bindings, continued (#6518)
Implementation of unused pattern bindings #2022, continued.

Whereas previous PR #6460 took care of parsing, and PR #6479 prepared
the stage by using _ in some test cases, this PR has the the actual
implementation, using a simple dataflow analysis.

---------

Co-authored-by: Burak Emir <bqe@google.com>
Co-authored-by: jonmeow <jperkins@google.com>
2026-02-19 23:33:36 +00:00
Richard Smith 6b28213b36 Add interop support for naming and "calling" C++ templates. (#6474)
Expose C++ class templates, variable templates, alias templates, and
concepts as callable values in Carbon, and map calls to them into
template-id formation, mirroring how Carbon generics behave. For now,
only type template parameters are supported; non-type and template
template parameters produce a TODO error.
2025-12-15 17:45:01 +00:00