Commit Graph
6 Commits
Author SHA1 Message Date
Chandler Carruth d0badecd2a Switch tests to use the rendered form of diagnostics (#8070)
Historically, we disabled the rendered form in tests outside of
`toolchain/diagnostics`. The idea was to keep tests shorter and avoid
very long chains of autoupdate before stabilizing due to all the line
numbers and other artifacts in the rendered form.

This PR adds `--diagnostic-line-numbers=[all|first]` and defaults to
`first` in tests. This keeps the rendered form so that we can easily
code review that form and the visual cues it does or doesn't provide.
But it removes all but the first location's line numbers to provide
significantly more stability in tests.

By default, tests get the full unicode line-drawing form of diagnostics
so we can ensure all of the artifacts there make sense with the specific
case being diagnosed, but we do retain some focused ASCII-rendering
tests to ensure that fallback remains usable.

There are some issues here that will be fixed in subsequent PRs.
Notably, we try to keep the frame together in the check lines, and so
force some parts to use the first location. This largely works, but
fails in some edge cases, causing the entire frame to be located
incorrectly. There is a TODO about this that we need to fix, and it only
occurs 6 times across the test suite, so it didn't seem worth
front-loading a fix for here.

Assisted-by: Claude Code
2026-11-05 07:19:59 +00:00
Chandler Carruth c608c35e12 Rework the initial terminal rendering into the form the design landed on (#7994)
There were a number of iterations on the design that weren't reflected
in the initial port to the terminal rendering library. This PR tries to
complete the rendering side of things to match the design we landed on:
code-focused, with messages attached by lines to the code, and condensed
as much as possible to avoid the vertical space.

It also improves the styling to make things more visually
distinguishable such as adding a `->` to the main error line, and making
the underlines and connectors for it have a heavy weight (when the font
supports that).

Another major change is having multiple messages on a single line be
drawn in source lexical order. This requires the connectors to cross
without joining, but makes it easier to read the messages.

This PR also has some refactorings to enable these improvements, and a
_number_ of improvements to comment prose and terminology to try and
avoid jargon and make things read more naturally. Sorry for the fact
that Claude left a bunch of this mannerly language in comments despite
my efforts, but I'm continuing to try and drive the prose towards
something direct and simple to read. Some of the terminology
improvements also needed to be made in the design doc and those have
been made here.

Note that I don't think this rendering is perfect or should be viewed as
final. I'm happy to iterate on it further, and have a few adjustments in
mind already, but would like to focus this on getting the
_implementation_ of the current rendering design in place, and then we
can make targeted changes or tweaks as needed. For example, I'm not yet
fully happy with the rendering when messages are too long and we move
them all the way to the left, but am leaving that for a follow-up.

Assisted-by: Claude Code
2026-10-31 06:10:03 +00:00
Chandler Carruth 2c9739799b Render diagnostics through the terminal library (#7683)
Diagnostic rendering was part of the data model: `Loc::FormatLocation`
and
`Loc::FormatSnippet` wrote plain text to a stream, so no capability,
color, or
terminal width could reach them.

A diagnostic is now one message with labels, contexts, and location
information
attached, and `Diagnostics::Renderer` draws it into a
`Terminal::Buffer`. The
design is in `toolchain/docs/diagnostics_rendering.md` (#7668),
authoring in
`toolchain/docs/diagnostics.md`.

Before:

```
example.carbon:6:3: error: 1 argument passed to function expecting 0 arguments
  Run0(1);
  ^~~~~~~
example.carbon:3:1: note: calling function declared here
fn Run0() {}
^~~~~~~~~~~
```

After:

```
error: 1 argument passed to function expecting 0 arguments
       ╭─┤ example.carbon:6:3
       ┆
     3 │ fn Run0() {}
       · ─────┬─────
       ·      ╰──┤ calling function declared here
       ┆
->   6 │   Run0(1);
       ·   ───────
       ╰────────────
```

`--no-diagnostic-snippets` gives a compact form, `example.carbon:6:3-9`.
File
tests use it; the rendering tests under `toolchain/diagnostics/testdata`
ask for
snippets.

C++ interop diagnostics are data now rather than text Clang drew:
`SemIR::ClangSourceLocId` names a `clang::SourceRange`, and a Clang
location is
marked as the point it names.

`StreamConsumer` moves to a `:renderer` target that `:emitter` does not
depend
on, keeping `common/terminal` out of `consumer.h`. Capabilities come
from the
file behind the error stream, so tests get plain ASCII.

`renderer_fuzzer` draws diagnostics built from fuzzer bytes with every
capability combination, since a shape the renderer doesn't expect must
never be
why the compiler dies while reporting a problem.

TODOs mark the follow-ups: line weights and crossing lines, wrapping
that keeps
a quoted type whole, and ordering diagnostics that share a byte offset.

Also: `IncorrectExtension`'s hint moves into its message, since its note
had no
location of its own, and `strip_noise` in `check_diagnostics.py` blanks
multi-line `#define`s instead of deleting them.

Assisted-by: Claude Code
2026-10-15 06:08:57 +00:00
Chandler Carruthandjosh11b 7871237c15 Move self to the explicit () parameter list (proposal #7016) (#7272)
Implements proposal #7016: `self` moves from the deduced implicit list
(`fn F[self: Self]()`) to the front of the explicit list. Its type may
be written explicitly (`fn F(self: Self)`) or omitted, in which case it
defaults to `Self` (`fn F(self)`, `fn F(ref self)`); `self` in the
implicit list is rejected.

Throughout checking, `self` is modeled as the first explicit parameter.
Because a method is just a function whose first parameter is `self`, it
can also be called as an ordinary function with the receiver passed
explicitly (`Type.M(obj, ...)`), not only as `obj.M(...)`. A new
`SemIR::CallArgParamPatterns` helper chooses the parameters matched
against the explicit arguments, excluding a leading `self` only when it
is supplied as a method-call receiver; arity checking, conversion, and
generic deduction use it. The resulting SemIR and lowering are
unchanged: `self` is still `call_param0`, and witnesses, thunks, and
vtables are unaffected.

An omitted `self` type is parsed as a `SelfBindingPattern` node with no
type expression; checking synthesizes the `Self` type so it behaves
exactly like `self: Self`. However, the exact spelling used must match
between a forward declaration and a definition, following #3763's rules
around declaration matching.

Generated functions, thunks, and C++ interop import/export build `self`
as the first explicit parameter, and the `self`-type override (e.g.
Derived->Base for a virtual override) applies to the explicit `self`.
Placement is validated by new diagnostics: `SelfInImplicitParamList`,
`SelfNotFirstParam`, and `SelfOutsideParamList`. The benchmark source
generator and the documentation adopt the `(self)` shorthand; the
prelude, the examples, and the test data are migrated in the following
commits.

Assisted-by: Claude Code with Claude Opus 4.7

---------

Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
2026-06-10 15:30:43 +00:00
fdb188ccfd Implement unused pattern bindings, continued (#6518)
Implementation of unused pattern bindings #2022, continued.

Whereas previous PR #6460 took care of parsing, and PR #6479 prepared
the stage by using _ in some test cases, this PR has the the actual
implementation, using a simple dataflow analysis.

---------

Co-authored-by: Burak Emir <bqe@google.com>
Co-authored-by: jonmeow <jperkins@google.com>
2026-02-19 23:33:36 +00:00
Richard Smith 1b2ae912fc Add basic support for eval fn and musteval fn. (#6694)
Add support for compile-time functions. `eval fn` is analogous to C++
`constexpr`, and is evaluated at compile time when it has compile-time
arguments. `musteval fn` is analogous to C++ `consteval`, and requires
that its arguments be available at compile time and is always evaluated
at compile time. For now we require the modifier to match across
redeclarations of the function. The specific modifier syntax here is a
placeholder and not yet part of an approved design.

Limitations: Only very basic support for evaluation is provided. So far
there's no support for mutable state or `if` expressions, but otherwise
control flow and passing and returning values should work. Carbon
evaluation recursion is modeled by C++ recursion for now, so you can
overflow the toolchain stack easily. Functions that use in-place
initialization will generally not work yet, as they are modeled as
passing a non-compile-time-constant reference to a temporary to the
call.

Add missing categorization of `name_binding_decl` as `NotExpr` to match
other similar declaration instructions like `FunctionDecl`, so that we
can uniformly skip over them when they occur within function bodies.

Assisted-by: Gemini 3 Pro and Flash via Antigravity
2026-02-11 02:08:16 +00:00