Commit Graph
9 Commits
Author SHA1 Message Date
Dana Jansens 9fb428d713 Ensure specific in ImplWitness has resolved definition before accessing witness table (#8040)
When impl lookup results in an `ImplWitness`, either directly or later
through `LookupImplWitness` evaluating to an `ImplWitness` inside some
specific, it represents a dependency on the eval blocks of the
`ImplDecl` that the `ImplWitness` comes from. The `ImplWitness` contains
a `SpecificId` of the `ImplDecl`, and the constants in the witness table
must be viewed through that `SpecificId`. The constants may depend on
the declaration or the definition block of the `ImplDecl`'s specific, so
any use of the witness table from `ImplWitness` requires the specific
from the `ImplWitness` to be fully resolved: both the decl and
definition blocks.

The specific declaration block is always resolved immediately when
forming a specific id, so there's nothing to do there. And things are
simple when the `ImplWitness` returned from impl lookup is concrete. We
would simply resolve the specific definition directly in the evaluation
of `LookupImplWitness`.

But when the `ImplWitness` is symbolic, meaning there's a dependency on
generic parameters in its referenced specific, then we have a dependency
on resolving the specific definition in the `ImplWitness` for every
specific that gets applied to the `ImplWitness`, eventually resulting in
a concrete specific.

Previously we attempted to do this by representing a dependency edge
from the eval block containing the `ImplWitness` instruction to the
definition block of the specific inside the `ImplWitness`. We
represented this dependency edge with the `RequireSpecificDefinition`
instruction.

The challenge with the `RequireSpecificDefinition` instruction was
ensuring it always landed in the _same eval block_ as the one holding
the symbolic `ImplWitness`. Ultimately, we've found a way to do this
without the `RequireSpecificDefinition`. The witness table is accessed
through `ImplWitnessAccess`, so we resolve the specific definition
before each access to the witness table. If the definition is already
resolved, this just costs a lookup of the Specific from the value store.

We document the other things we tried, which don't work or were too
complex, below.

In PR #6236, we added the `RequireSpecificDefinition` instruction in the
eval of `LookupImplWitness`, but this is too late. If impl lookup
resolved to a symbolic `LookupImplWitness`, the `LookupImplWitness` is
added some eval block. Later, we form specifics and re-evaluate that
eval block, and the `LookupImplWitness` can evaluate to an
`ImplWitness`. Adding the `RequireSpecificDefinition` instruction at
this point inserts the instruction into whatever generic's eval block
happens to be on the top of the generic stack, not the eval block of the
generic we are building a specific for. And indeed we can't add
instructions to a generic's eval block later like this, as it would be
missing from specifics that were already resolved for the generic. This
incorrect insertion shows up as a crash in eval at the CHECK introduced
but commented out in [eval.cpp in
#7981](https://github.com/carbon-language/carbon-lang/blob/56d9bbc40add1e9263f2f9b2555c3a27292d1725/toolchain/check/eval.cpp#L3507-L3512).
This is covered by the
`require_specific_impl_definition_through_specific_instantiation.carbon`
test.

We tried moving the insertion of `RequireSpecificDefinition` to be
earlier - at the point where the `LookupImplWitness` is constructed, in
the `LookupImplWitness()` function, instead of inside evaluation. This
seemed like a straightforwardly correct answer, as the eval block that
contains the `LookupImplWitness` will then also contain the
`RequireSpecificDefinition`. However, this can cause us to lose the
`RequireSpecificDefinition` entirely. Because it's a separate
instruction, not an operand of `LookupImplWitness`, it does not get
treated as a dependency of the witness. When we do an impl lookup inside
an `alias`, we build a generic for the alias and then discard it. This
discards the eval block containing the `LookupImplWitness`. Then, in an
enclosing generic, we refer to the constructed `AliasDecl` instruction,
which pulls all its dependent operands into the enclosing eval block.
This pulls in the `LookupImplWitness` into the enclosing eval block, but
it does not preserve the `RequireSpecificDefinition`. This is covered by
the
`require_specific_impl_definition_from_lookup_impl_witness_in_class_definition.carbon`
test.

We tried having `ImplWitness` evaluation resolve the specific definition
of the specific `ImplDecl` it refers to. This seems like the simplest
approach by far as we should always be working with the correct eval
block and nothing can get lost. However it does not work because of the
recursive nature of `ImplWitness`. The `ImplWitness` instruction appears
in the declaration of an `ImplDecl`, and the `ImplWitness` holds a
`SpecificId` for that same `ImplDecl`. When building a specific
`ImplDecl`, we evaluate the `ImplWitness` in the `ImplDecl`'s
declaration block which then immediately resolves the specific
definition before the declaration is finished. This leads to missing
instructions in the specific definition. In short, this puts the
dependency edge to the `ImplDecl`'s specific inside the `ImplDecl`
itself, which is problematic.

We tried wrapping `ImplWitness` in another instruction,
`ImplWitnessUse`. Inside the `ImplDecl` declaration there is still
`ImplWitness`, but then in the definition there is `ImplWitnessUse` and
that is what is returned from the evaluation of `LookupImplWitness`. The
`ImplWitnessUse` is an `ImplWitness` plus it ensures the specific
referred to by the witness has its definition resolved. However this
breaks constant comparisons, as we get different witnesses inside an
impl versus outside.

The first iteration of this PR's solution had us insert the
`RequireSpecificDefinition` into the eval block when we sniffed a
`LookupImplWitness` instruction, however that missed cases where impl
lookup immediately resolved to a symbolic `ImplWitness`, which is why we
now sniff for the `ImplWitness` in the eval block. This is covered by
the
`require_specific_impl_definition_from_symbolic_impl_in_class_definition.carbon`
test.

We also originally made a mistake of not inserting
`RequireSpecificDefinition` when inside the impl definition that the
`ImplWitness` refers to. But we can form specifics ImplWitness values
through function signatures, and these must add the dependency edge on
that specific ImplDecl definition. This is covered by the
`require_specific_impl_definition_from_inside_impl_definition.carbon`
test.

Finally, we did have a working solution. It was to sniff instructions
added to the eval block of a generic, and when an `ImplWitness` is added
to the eval block (it is implied that it is symbolic), also add a
`RequireSpecificDefinition` to that eval block immediately. We also
resolved the definition of a specific referred to by `ImplWitness` when
`LookupImplWitness` evaluates to `ImplWitness` to cover the concrete
witness case. This complicated the construction of the eval block
immensely, however. It caused a situation where adding one inst to the
eval block actually adds two, which we needed to avoid when importing.
And it required inst-kind specific behaviour in the very general
construction of an eval block, completely outside of eval itself.
2026-11-03 14:15:14 +00:00
Richard Smith e1c8c1f855 Use specific_constant when referring to name in enclosing generic (#7936)
When unqualified lookup finds a name from an enclosing generic, create a
`specific_constant` if it's a constant, or a `specific_inst` otherwise,
to refer to that name from the inner generic. This allows consumers of
generic instructions to always use a specific of the current scope's
generic when accessing the constant value or type of a dependent
instruction.

Fixes crashes in dominance and in `GetExprCategory` caused by using
specifics for the wrong generic.

Assisted-by: Gemini via Antigravity
2026-10-15 02:00:24 +00:00
Dana Jansens fcae9610bd Make SemIR::TypeType be an empty FacetType instruction (#7813)
The type `type` is now a `FacetType` inst with no constraints. This
brings the model implemented in the toolchain into better alignment with
the language design. The `SemIR::TypeType` struct remains as a scope for
holding the `TypeInstId`, `ConstantId`, and `TypeId` constants, but is
not an `InstKind` anymore.

The `TypeType` inst looks a lot like singletons, but there are many
`FacetType` insts so it doesn't quite fit that model. So we put it
alongside singletons with a fixed inst id but refer to it as a more
general "builtin" inst that is not a singleton.
`Namespace::PackageInstId` is similar, and we group it with `TypeType`
conceptually as another builtin instruction with a fixed id.

No conversion is needed anymore to use a `type` as a facet, since types
also have a `FacetType` type. This simplifies and removes a number of
helpers and branches throughout the code.

The `TypeType` inst is now part of the constant store, so we end up
printing it in the constants block in every test. But it's also named
`type` rather than `%type` to preserve the majority of existing
formatting behaviour, though this does look different from other
constants.

Assisted-by: Opus 5 was used to generate a first draft and validate the
refactoring. Though nearly everything non-trivial the tool wrote has
been modified or rewritten.
2026-09-22 15:04:40 +00:00
Richard Smith a8afc45ed5 Omit empty observe: blocks from formatted SemIR. (#7487)
Also add SemIR ranges to observe test, removing 5K lines of
uninteresting SemIR output.
2026-07-13 20:38:19 +00:00
Chandler Carruth 8be274cf60 Replace :! binding syntax with phase keywords and contextual defaults (#7479)
Implement the toolchain side of proposal #7254, removing the `:!`
binding
syntax for generic and template parameters in favor of the keywords
`generic`,
`template`, and `runtime` plus contextual defaults for phase.

For valid programs this is semantics-preserving: each binding resolves
to the
same phase, and produces the same SemIR, as it did under `:!`/`:`. The
parser
derives a binding's phase from its syntactic context plus any explicit
phase
keyword; new diagnostics and error recovery for misused keywords are
described
below.

Implementation details for each component:

- Lexer: remove the `:!` (`ColonExclaim`) token, move its virtual
parse-node
  budget onto `:`, and add the `generic` and `runtime` keywords.
- Parser: thread a `BindingContext` (`ExplicitParam`, `DeducedParam`, or
`CompileTimeEntityParam`) from declaration introducers down through
parameter
lists to each binding pattern, using a one-token lookahead to
distinguish a
name-qualifier parameter list from a declaration's own final list.
Parameters
of a compile-time entity (`class`, `interface`, `constraint`, `choice`,
`alias`, `export`, `namespace`) and deduced `[]` parameters default to
checked
generic; explicit function parameters and local bindings default to
runtime.
`HandleBindingPattern` resolves the phase from that context plus the
keyword: a
`generic` keyword needs no node of its own (the phase is carried by the
  binding's node kind), while a `runtime` keyword is preserved as a
`RuntimeBindingName` node so `check` can name it in a diagnostic. A
phase
keyword that is merely redundant with the contextual default is
diagnosed
  here, without invalidating the parse tree.
- Check: a phase keyword that is invalid for its context (for example
`runtime`
on a checked-generic parameter) is diagnosed here, and recovers by
building an
error binding that still introduces the name so that later uses of it do
not
  produce cascading errors.

The removed `:!` syntax is now rejected as an ordinary parse error.

The `form`/`:?`/`->?` ("extended types") portion of proposal #7254 is
left for a
separate change.

Assisted-by: Claude Code
2026-07-11 01:22:44 +00:00
Dana Jansens 4261bb2dd2 Track and don't replace active .Self (#7443)
In #7436 we stopped substituting `.Self` when collecting witnesses out
of a facet type. While this was correct, it did not capture all the
cases that need to avoid substituting `.Self`. And it poisoned the
`IdentifiedFacetType` cache by not replacing `.Self` but storing the
result in the cache. This led to incoherent behaviour, where the result
of an impl lookup would change depending on which ones had been done
previously.

Now we use a flag to track for each `.Self` if we're currently
type-checking inside the scope where it was introduced in a facet type.
While inside that scope, identify should not replace the `.Self`. Any
use of it should remain as-is since we don't yet know what value will
replace it. We call this state "frozen" since it should not be modified
by identify. This requires a substitution step when we leave the scope
that introduced the `.Self`, to remove the flag. The flag is set in the
`EntityName` of the `SymbolicBinding`, and is part of the canonical
value, since `.Self` can become part of types, which are constants, and
the flag needs to follow it for correct behaviour.

We also have to ensure the flag is the same when doing comparison with
constants from inside a facet type and constants from outside. For
instance in `(Z where .Z1 = ()) where .Z2 = .Z1`, when we arrive at the
second `.Z1` its `.Self` will be frozen, while the `.Z1 = ()` contains a
non-frozen `.Self`. So we add the frozen flag to the first when storing
it in `where_stack` in order to compare the constant values of the two
`.Z1`.

The `WhereExpr` requirement inst kinds now have an `InstConstantKind` of
`AlwaysUnique` instead of `Never`. This allows us to add them to the
usual InstBlocks, and in an `eval fn` body they have a constant value,
so eval does not fail when trying to call that function. We have to be
careful to not consider `AlwaysUnique` as being actually concrete
though, since their constant value erases `.Self`-dependence. This
allows us to stop special casing them when thawing the requirements
block in a `WhereExpr`, and we can just thaw each `InstId` in the block
in a straightforward manner.

We add the new flag to the instruction's fingerprint and name in
formatted semir.
2026-07-08 18:04:56 +00:00
Özgür T. ÖnsoyandDana Jansens 08385adeb5 Implement checking observe declarations (#6709)
This adds SemIR structs and implements building `observe` lists, as well
as naming, formatting, and importing `observe` declarations.

---------

Co-authored-by: Dana Jansens <danakj@orodu.net>
2026-07-08 17:07:10 +00:00
Geoff RomerandRichard Smith e023f75254 Implement thunking in terms of constant evaluation (#7332)
The bulk of this change is changing most pattern insts to be `Always`
rather than `AlwaysUnique` constants, so that they can be wrapped in
`SpecificConstant`s to perform substitution. That then lets thunking
rely much more on `SpecificConstant` wrappers instead of deep-copying
the inst tree with modified types.

This approach to thunking should scale better, particularly as things
like form generics make function signatures more complex, because we can
leverage the existing support for constant evaluation and substitution.
Unfortunately, applying this approach to binding patterns will require
more work; see the TODO near the top of `thunk.cpp` for details.

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2026-06-13 00:22:00 +00:00
antangelo 8e477cc2c6 Fix crash when calling local function in generic function (#6912)
Pass a function's self specific in `ScopeStack::PushForFunctionBody` and
remove assertion preventing lexical scopes from having specific IDs.
This allows lexical lookup within the function to find entities
associated with its self specific.

Closes #6793
2026-06-02 16:27:21 +00:00