Splits IR files into SemIR, and logic files into Check. These will be
split into separate directories as part of a later move; the namespaces
are being done first in order to vet the switch, and hopefully make
conflicts a little easier to manage due to the substantial renames.
A lot of this is just automated removal of Semantics prefixes from
names, adding namespace references where needed. A few special-cases
are:
- SemanticsIR -> SemIR::File
- A few things were discussed, like Unit, CompileUnit, or CompiledUnit.
Unit was too vague for chandlerc, and I thought CompileUnit might lead
to incorrect inferences (CompilationUnit would be more precise, but
typically written as SemIR::CompilationUnit which is pretty long). File
seemed to be a short name that we could agree on.
- SemanticsIRFormatter -> SemIR::Formatter
- FormatSemanticsIR -> SemIR::FormatFile
- SemanticsFileTest -> CheckFileTest
- It remains in the Testing namespace, where just "FileTest" might be
too broad a name.
- SemanticsDeclarationNameStack::Context ->
Check::DeclarationNameStack::NameContext
- This avoids a Check::Context name shadowing.
Changes check_internal.h to include ostream.h to improve finding of
Print/operator<< (otherwise it didn't compile).
This is part of #3070
This removes BindName, putting name information directly on VarStorage.
As a side-effect of updating semantics_ir_test for this change, I also
noted that function bodies were being generated as invalid YAML so am
fixing that (just `{}` to `[]` bracketing, otherwise the test wouldn't
work anymore).
Because names are now available, I've updated lowering to use them for
vars.
In the SemIR formatter, the name is now repeated because it's a
parameter to VarStorage. I believe this is just default behavior, and
we'd have to special-case VarStorage to remove it because it's automatic
argument printing in action. On the balance, it felt like letting it
print was reasonable.
I've noted in places that the name on VarStorage is expected to be
optional, but am not adding support because I'd have no way of testing
it at present.
This also tries to restructure the command line interface to the
toolchain a bit to make it start operating more like a compiler that
could be integrated into a build system rather than primarily as
a testing tool.
1) This switches form a `dump` subcommand to a `compile` subcommand
which has "dump" actions that can be enabled within it.
2) A distinct set of compile _phases_ that match the toolchain
structure:
- `lex` to run the lexer
- `parse` to run the parser
- `check` to fully check that the code is valid
- `lower` to lower to LLVM's IR
- `codegen` to generate executable code
3) The codegen phase has two output formats: textual assembly and
a binary object. These outputs can be configured, with a default for
an object when writing to a file and more firm default for textual
assembly when writing to stdout.
4) Select and expose the use of the LLVM host detection to compute
a default code generation target in the driver so that the command
line interface can reflect this. For example, the `help` output will
include the default target.
5) The `//toolchain/codegen` library APIs have been restructured a bit
to make the code flow a bit more naturally when implementing the new
command line structure. No real changes to the logic though.
There are also some minor tweaks to the command line interface based on
trying to use the shortest names for things that still seem likely to be
learnable for users:
- Switched `target-triple` to just `target`: the "triple" component to
this name is historical and can be confusing. For example, almost all
"triple" strings have more than three components today.
- Switched to just `--output` as now the fact that it is a file can be
configured in the documentation -- it will render as `--output=FILE`.
This also adds support for two custom output filename modes. First, when
no output is specified, we now compute one in the conventional way for
compilers by removing the file extension of the input file and replacing
it with `.o` for an object file output or `.s` for an assembly file
output. This matches the behavior of Clang and GCC for example.
Second, output to stdout is enabled with the special output file name of
`-` since it is no longer the default. This also follows the convention
of most compilers and many other command line tools to use `-` as a file
name to signify using standard in/out pipes.
There are still some rough edges here that I suspect could be improved,
but this seems like a good start of switching over to a complete
argument parser.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Lucile Rose Nihlen <luci.the.rose@gmail.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Add a textual IR format to the toolchain.
The exact details of the format are somewhat arbitrary right now, and I
expect them to change as we refine the semantics IR model, but at the
moment they're somewhat directly following the current structure of the
IR.
Semantics tests currently test both the "raw" format, which shows the
details of the representation, and the textual format, which is somewhat
higher level. We may want to revisit that decision once the textual
format is a bit more stable, and test only the textual format in most of
these tests, but for now it seems prudent to keep both sets of tests.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Replacing direct raw_string_ostream uses. I figure the wrapper should be used more consistently.
There are still remaining raw_string_ostream uses that weren't compatible -- I'm continuing to look at those, but felt it was cleaner to have this on its own.
Now that the driver uses vfs, there's less reason for tests to do their own flow. Switch SemanticsIRTest to use the driver directly as an example simplification.
This adds vfs support to the toolchain, allowing Driver to take in-memory inputs in tests. As a consequence, I'm simplifying SourceBuffer: rather than allowing tests to pass in their own memory buffer, I'm using InMemoryFileSystem to push for greater consistency with production code. This does hit a quirk where I need to be careful about null terminator handling because fuzzer imports don't always have one, but that's probably more robust anyways.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This shifts logic so that bindings are added to name lookup only after the scope is complete, removing logic around adding/removing/re-adding names in certain scopes.
This does mean that things like a function's forward declaration will need to go through an extra hoop for name conflict checks, because under this approach a function definition does conflict checking when it adds names for the body's use. But, that seems easy to address, and better than the current hoops.
This switches types to using SemanticsTypeId instead of SemanticsNodeId, and lowering pre-builds its list of types. The empty tuple type is special-cased because we don't want to emit it unless it's in-use, but as the implicit return for functions, it's frequently used. Callables use invalid to indicate the implicit return, and that seems undesirable to change due to the size increase.
This is the first step to refactoring types into a SemanticsTypeId. This only tracks what's in-use, but as a consequence starts funneling type information through in ways similar to how I'd want it to do SemanticsTypeId.
Previously, IR for arguments in calls and struct values was separated out. This merges it back in. Additionally, parameters for functions and struct types had their own IR; the block is still there, but there's a TODO to decide what to do with it.
In the LLVM IR, this has the consequence of emitting expressions that are inputs to a call or struct value within the scope of the function, which is pretty much where it should be. Importantly it happens before the call is encountered.
This change also tinkers with the int and real literal lowering. I'm pretty sure both are still wrong, but was having trouble figuring out a "better" way to do it, and this seems like it'll work for now.
These changes should make output more stable when builtins are added to semantics. By omitting them from nodes and printing nodes as "relative to the last builtin", I should be able to add and remove builtins without automatically affecting every test. Also by printing builtin nodes as `nodeNameOfBuiltin`, it's a little easier to understand what's going on (for me, at least).
This adds tracking of call information plus basic type checking. It adds a builtin for the empty tuple, mainly so that I have the basis for a default function return type.
As an aside, it also unifies printing within SemanticsIR, fixing a missing comma after callables.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Reals were mostly handled, but this PR adds storage of them. It also switches a little towards the FloatingPointType semantic from TokenizedBuffer.
While real literals like `1.0` were handled, the type literals were not. This just adds `f64`, similar to how I also only support `i32`.
The String type literal wasn't used, so I've added support in lexer and parser. Per discussion with @zygoloid String might be renamed based on the newer type literal plan, but it's still String in explorer and the design, so this is just consistent.
The builtin_types.carbon tests the three basic types that are there right now. The test is added to both parser and semantics so that it's clear what the state is in both stages.
For parameters (and in the future, arguments too; generally comma-separated lists) track two node blocks:
1. param_ir: The complete IR.
2. param_refs: Nodes within the IR that are the "root" parameter.
param_refs should allow quick counting of the # of parameters, and more efficient comparison of call args with function parameters. param_ir should be necessary to generate the actual signature.
In order to construct this, this refactors the node_block_stack into its own class, which is reused in params_stack. These carry references to the underlying SmallVector for lazy modification in order to avoid a dependency cycle with SemanticsIR (also see notes on empty node blocks below).
When finalized, the block pair is pushed onto finished_params_stack. That's because node_stack only has space for one thing, and this is two things -- so I'm essentially choosing a trade-off of adding another stack in order to avoid consuming more space in the expectation that most parse nodes have 0 or 1 things to return, and 2 will be very rare.
As factored, this currently consolidates most empty node blocks into a single canonical empty node block. This is because I think empty blocks, i.e. `()`, will be very common. In order to achieve this, SemanticsNodeBlockStack does lazy creation.
An alternative approach would have been to use 1 node block per parameter. We decided against this in order to reduce the number of vectors being created.
The parser and lexer already produce YAML, so this is fundamentally a consistency issue. I've been thinking about this, and was looking again because I'm working on adding callables, and figured I'd just fix it now.
Jon Ross-Perkins
Farzana Ahmed SiddiqueandFarzana Ahmed Siddique