This should handle over-long lines. I had tried to make the normalize
method work, but it doesn't seem promising and so let's at least enable
this version.
Assisted-by: Antigravity with Gemini
Document the phase of associated constants, which the discussions of
contextual phase defaults never covered: an associated constant is
always a checked generic binding. This is deliberately not presented as
a contextual default, because no other phase is possible for the
construct; correspondingly, no phase keyword (including `template`) is
allowed on one. Also rework the associated constants section of the
design README where the migration left a non-sequitur ("set to
compile-time values ... and so are defined using a `let` declaration"):
describe the `let` syntax and the binding's contextual phase separately.
Use consistent terminology for bindings versus constants. Bindings are
"checked" or "template" (generic) bindings, replacing the "symbolic
binding" and bare "generic binding" terms, so "symbolic" now only
describes constants and values. The "Symbolic facet bindings" section of
the generics details becomes "Checked facet bindings". The
expression-phase terms "symbolic constant" and "template constant" are
unchanged, and the binding-pattern definitions now name the constant
each kind binds. Template bindings are additionally described as
dependent and late checked, with each instantiation providing the
binding's value.
Also normalize the remaining "regular parameter" mentions to "runtime
parameter" to match the binding terminology, and describe the
compile-time "let template" as introducing a template generic binding
"T: C" whose uses are template constants.
Assisted-by: Claude Code
Carbon currently requires a comment to be the only non-whitespace on its
line. A `//` comment that follows other content on a line, called a
_trailing comment_, is a lexer error. This proposal removes that
restriction, allowing a comment to follow other content on a line.
Everything else about comments is unchanged: a comment still begins with
`//`, still requires whitespace after the `//`, and still runs to the
end of the line. Carbon continues to provide only line comments; no
block or intra-line comments are added.
Three observations motivate the change. First, trailing comments are
well suited to short _annotations_ attached to a specific entity or
value on a line. Second, the lexer design now makes it trivial to lex
trailing comments, and in fact requires extra logic and potentially cost
to reject them. Third, C++ code routinely uses trailing comments, so
allowing them lets Carbon carry the layout of migrated code over
directly, rather than reworking each comment to read well in a different
structure.
Implementation notes (beyond the proposal's design):
Keeping trailing comments cheap to lex required a few supporting
changes, all of which keep the cost off the lexer's hot path:
- The lexer already dispatches `//` to comment lexing wherever it
appears, so classifying a comment as trailing is a single O(1) check of
whether the `//` is the line's first non-whitespace (`start + indent`).
The hot comment path is otherwise unchanged.
- That check relies on each line's recorded indentation being its real
leading whitespace. Multi-line string literals previously recorded the
column where the literal opened for the lines they span; they now record
the true (closing-delimiter) indentation instead.
- Parser error recovery (`SkipPastLikelyEnd`) had relied on that
opening-column indentation to keep tokens following a multi-line string
literal attached to the same construct. It now reconstructs that
relationship directly by consulting the line on which the literal
opened, including when other tokens follow the closing delimiter (such
as `''' + "more"`). This is on the cold recovery path.
- `CommentData` records the trailing bit in the high bit of its length
field, keeping it at 8 bytes.
Assisted-by: Claude Code
This proposal removes the `:!` syntax for generics and templates in
favor of keywords (`generic`, `template`, `runtime`) and contextual
defaults for phase. It also replaces `:?` with `fwd` and introduces
`exttype` for extended types.
Assisted-by: Antigravity with Gemini, and Claude
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Rumdl already appears to have _significantly_ fewer bugs than prettier,
and a solid LSP for editor integration.
The tool is: https://github.com/rvben/rumdl/
I've separated out the change across three commits for easier review.
The configuration tries to match the existing formatting, the changes to
the all the files are to correct issues found by the new tool.
Assisted-by: Antigravity with Gemini
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Incorporates changes from these proposals:
- #2022
- #2875
- #3262
- #3763
- #3848
- #5434
A small amount of updating was done to lambdas.md and variadics.md to
harmonize with these changes.
Assisted-by: Gemini via Antigravity
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Geoff Romer <gromer@google.com>
Also:
- Introduce `buf` so that existing examples using arrays can be updated
to use it.
- Update the examples linked to on the Carbon front page to something
closer to what we expect, moving away from old array syntax. Uses
`slice` though that name hasn't been settled. Updating the SVGs actually
referenced will need to be done as a separate step.
- Update links to the expression operators while I'm touching that
section.
Assisted-by: Gemini via Antigravity
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Nicholas Bishop <nbishop@nbishop.net>
Note that #7266 has already updated the toolchain for `char`, but not
`Core.CharLiteral`.
Assisted-by: Gemini via Antigravity
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Geoff Romer <gromer@google.com>
We've talked about adding the title to the filename several times over
the years and it seems really valuable. This requires us to compute a
"slug" for the title spelling that can be part of the filename.
Beyond that, we crossed 7000 recently, and so it seems likely that we
will need to add digits sooner rather than later here, so this goes
ahead and moves us to 6 digits so we don't have to adjust again for a
reasonable length of time.
To implement this and ensure we can sustain it going forward this adds a
tool to our pre-commit that validates (and corrects if needed) the
filename.
In order to update everything and keep links working, there are a _lot_
of changes, but the most interesting for direct review are in
`proposals/scripts`.
Assisted-by: Antigravity with Gemini
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Update the syntax for class (and interface/`impl`) methods to move
`self` into
the parameter parentheses `()` and make the type in its binding optional
(defaulting to `Self`). Introduce the `static` keyword for non-instance
member
variables to indicate static storage. Reflects the decision in leads
issue
[#6931](https://github.com/carbon-language/carbon-lang/issues/6931).
Updates the directly relevant design, but leaves a systematic update of
examples
to a future PR.
Assisted-by: Antigravity with Gemini
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This proposal removes the definition of the term "value binding" as a
primitive
category conversion from reference to value, replacing it with the term
"value
acquisition". The other meaning of "value binding", a binding declared
by a
value binding pattern, is unchanged.
Updates the documentation under `docs/design/` to use `ref` instead of
`addr` after their removal in #5434. Care was taken to manually clean up
edge cases and, in a couple cases, surrounding text (see
3d72c49bb75c0f40ca7e8114b6a1369b941e1697). After this change, there are
no matches for `addr(?!ess)` in `docs/design/`.
Closes#6032
Require language design proposals to either update the design documents
to
reflect the proposed changes, or add "TODO" comments to mark where those
changes
will be needed, with links back to the proposal. This is intended to
ensure that
the design documentation accurately informs readers about the current
language
design, without excessively burdening the proposal process.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Carbon is accelerating and adjusting its safety strategy, specifically
to flesh out its memory safety strategy and reflect simplifying
developments in the safety space.
This proposal replaces the previous directional safety strategy with a
new concrete and updated framework for the safety design. It includes a
specific framework for memory safety, simplified build modes, specific
"safety modes", and terminology.
This proposal also provides a _directional_ suggestion for temporal and
data-race safety specifically.
In addition to fully building out the above directional component, there
are several other aspects of our safety design that will follow in
subsequent proposals. The hope is to establish the initial framework
here.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Co-authored-by: Mike Forster <michael@forster.pro>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Fix destructor syntax ambiguity by switching to `fn destroy` mirroring
standard function syntax. This is a purely syntactic change, maintaining
destructor semantics.
This comes from leads question #4999
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Update broken links to aid in following links while perusing the
documentation. Closes#3778
I don't imagine I got every one of these right. Some 404s may be
reported due to permissions.
Using the lychee command in #3778, only the following link is reported
as not found, but it's just a permission issue:
```
[proposals/p1367.md]:
✗ [404] https://github.com/carbon-language/carbon-lang/settings/access | Failed: Network error: Not Found
```
I tried to get it down to as few as possible, partially so that future
link scans won't run into repeat errors.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Includes proposals:
- #990
- #2188
- #2138
- #2200
- #2360
- #2760
- #2964
- #3162
Also tries to use more precise language when talking about:
- implementations, to avoid confusing `impl` declaration and definitions
with the `impls` operator used in `where` clauses, an issue brought up
in #2495 and #2483;
- "binding patterns", like `x: i32`, and "bindings" like `x`.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
First step in updating `docs/design/generics/details.md`. It
incorporates changes from proposals: #989#2138#2173#2200#2360#2964#3162 , but there are still more changes from those proposals to be
made.
It also switches away from suggesting static-dispatch witness tables,
and creates an appendix to describe that decision.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Change terminology away from terms that are ambiguous:
- Reserve "generic type" for types with (compile-time) parameters, like
`Vector` in `Vector(T:! type)`. Don't use that term to refer to `T`, as
it would with
[#2360](https://github.com/carbon-language/carbon-lang/blob/trunk/proposals/p2360.md#terminology).
- Use the term "compile-time" instead of "constant" to mean "template or
symbolic." Expand the term "constant" to include values, such as from
`let` bindings.
Introduce a concrete design for how Carbon values, objects, storage,
variables,
and pointers will work. This includes fleshing out the design for:
- The expression categories used in Carbon to represent values and
objects,
how they interact, and terminology that anchors on their expression
nature.
- An expression category model for readonly, abstract values that can
efficiently support function inputs.
- A customization system for value expression representations,
especially as
seen on function boundaries in the calling convention.
- An expression category model for references instead of a type system
model.
- How patterns match different expression categories.
- How initialization works in conjunction with function returns.
- Specific pointer syntax, semantics, and library customization
mechanisms.
- A `const` type qualifier for use when the value expression category
system
is too abstracted from the underlying objects in storage.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Co-authored-by: josh11b <josh11b@users.noreply.github.com>
Co-authored-by: Adrien Leravat <Pixep@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Make the preamble of simple programs more ergonomic, by removing the
`package Main` from the main package and removing the `package`
declaration
entirely from the main source file. Imports within a single package no
longer
need to, and are not permitted to, specify the package name.
Partially covers #2001 / #1136.
Covers #1869.
Supersedes #2265.
Addresses design idea #2323.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: josh11b <josh11b@users.noreply.github.com>
This includes:
- Syntax changes from this chart:
| Before | After |
| ------------------------------- | --------------------------------------- |
| `class D extends B { ... }` | `class D { extend base: B; ... }` |
| `external impl C as Sub;` | `impl C as Sub;` |
| `class C { impl as Sortable; }` | `class C { extend impl as Sortable; }` |
| `adapter A for C { ... }` | `class A { adapt C; ... }` |
| `adapter A extends C { ... }` | `class A { extend adapt C; ... }` |
| `interface I { impl as J; }` | `interface I { require Self impls J; }` |
| `interface I { extends J; }` | `interface I { extend J; }` |
- Dropping the syntax for conditionally implemented internal interfaces.
This does not include:
- terminology changes from #2760 ("internal" and "external")
- changes to code, such as explorer, toolchain, language grammars, or other tooling
Use the keyword `impls` instead of `is` when writing a `where` constraint that a type variable needs to implement an interface or named constraint.
What was previously (provisionally) written:
```
fn Sort[T:! Container where .ElementType is Ordered](x: T*);
```
will now be written:
```
fn Sort[T:! Container where .ElementType impls Ordered](x: T*);
```
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
This tries to make it clearer that user code is responsible for ignoring observable differences between the possible behaviors, and uses "alias" instead of "pointer" to describe the reference-like option. It also avoids taking a stance on how we address the possibility of the original value being mutated after it is aliased.
Statements, declarations, and definitions will terminate with either a semicolon
(`;`) or a close curly brace (`}`). Semicolons are never optional.
For example, with a semicolon, `x = x + 2;`. With a close curly brace,
`for ( ... ) { ... }`, or `class C { ...}`.
This does not affect any approved proposal; rather, it makes an important
assumption explicit.
Based on lead decision #1924Fixes#2002
Assignment is permitted only as a complete statement, not as a subexpression.
Assignment and compound assignment syntax follow C++ in all other respects.
Pre-increment is provided. Post-increment is not. Uses of all of these operators
are translated into calls to interface members.
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Also make minor updates to the skeletal design in
docs/design/name_lookup.md following #2113, as there are no longer any prelude names that are made available to unqualified name lookup by default.
Add `type` to the keyword list in
docs/design/lexical_conventions/words.md, following #2360.
Follow-on to change #2410 which created the `expressions/literals.md` home for literal expressions. Incorporates the decision in #2113 to address a TODO.
Update the design documentation to reflect #2274.
The contents are largely copy-pasted from p2274.md with minor edits, but the "Open questions" section is new.