Remove the type canonicalization mechanism and instead rely on constant
canonicalization to deduplicate types.
Rename the `Canonicalize*Type` functions to reflect that they're no
longer performing canonicalization. Switch code that creates types due
to semantic checking, rather than due to source syntax, to directly
create type constants through evaluation rather than creating an
instruction and evaluating it to produce a separate constant
representation.
The mapping from `const (const T)` that was previously performed by type
canonicalization is now implemented in expression evaluation instead.
The value `<error>` is now treated as a constant value, with a special
property that an instruction involving `<error>` that could possibly be
constant evaluates to `<error>`. This helps avoid producing follow-on
errors when an error occurs as a subexpression of an expression, such as
a type, that is intended to be constant.
This makes duplicate and previous definition handling match. While we
may want to make both point more fine-grained at the name, the necessary
logic seems likely to be equivalent.
Note, I'm looking at this mainly due to duplicate names in imports,
where it's especially helpful to take an instruction instead of a parse
node. We'll eventually want to handle parse nodes from other imports
better, and I think this is the way it would most likely work.
Instructions created by splices during conversion are now evaluated, as
are instructions created in cases where we first create a placeholder
instruction and later replace it by a different instruction.
This also removes the ability to set a parse node and instruction
independently after creating an `InstId`, which could lead to them
accidentally not matching.
The parse nodes are still tracked as part of the same value store
interface in order to ensure parity, but they're split out from Inst
itself in order to reduce the size of Inst -- the expectation is that
they don't need to be passed around quite as much.
This change doesn't actually reduce the passing very much, although
there are hints of it: AddInstAndPush doesn't typically need a separate
parse node from the one on the Inst itself, for example. In a couple
spots I changed code to rely a little more on the InstId until the
ParseNode is needed, but it's very low hanging fruit where done. I think
convert could do more to not eagerly fetch the parse node before its
use, but more cleanup felt it would be easier to handle separately. I'm
currently viewing this as making such cleanup _possible_ rather than
executing on it up-front.
But also, I want to make sure there's a consensus to head in this
direction before pulling the trigger. We speculated that this would
result in the parse node being passed around less, and I do think that's
the case, although it's a bit fuzzy in the change.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Namespaces are copied, which means also adding their name to the
underlying instruction. It happened not to be done previously; the name
was only in name lookup.
Since the only import supported right now is the default import,
functionality is limited; in the future I'll need to deal with namespace
vs package conflicts.
Tests of namespace imports are under "namespace" -- I figured this would
be best for scaling as more instructions get support.
This also improves some debugging-related output that I was trying to
use while trying to build the support.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This change adds a `BindSymbolicName` instruction for generic bindings,
paralleling the existing `BindName`. A mechanism is also added to allow
both kinds of binding to be accessed uniformly, for convenience in the
case where the two different kinds of binding are treated the same.
Generic bindings of type `type` are allowed to be used as types,
although no operations are provided for such types. For now lowering
treats these types as empty structs, which seems like a reasonable
lowering for non-monomorphized unconstrained types.
This is a step towards adding enclosing scopes for imports. It creates
an indirection for all bind names.
We discussed specializing for bindings that are in function scope (i.e.,
not a useful enclosing scope for imports or diagnostics). However, the
thought is to go ahead with this singular approach for now, and only
change structure if it's a performance issues so that we have
incrementally fewer instructions to handle.
This involves a number of supporting changes:
* The `parse_node;` member of instruction types may now have any type
derived from `Parse::NodeId` and is no longer required to have that
exact type.
* `Parse::Node::Invalid` is now a singleton object of a separate type
that is convertible to `Parse::NodeId` and its descendants. This
replaces the `Invalid` member of its descendants, and avoids having to
write long `NodeIdOneOf<...>` types when initializing variables to
invalid.
* `IndexBase` now allows `==` and `!=` comparisons between its derived
classes and types that are convertible to those types.
* A number of functions in the check stage have been changed to preserve
more type information instead of using `Parse::NodeId`.
* `NodeIdForKind<K>` (also known as `KId`) now has a `Kind` member so it
may be used to declare `NodeIdOneOf<T, U>` types without #including
`parse/typed_nodes.h`.
* `NodeIdForKind<K>` (also known as `KId`) may be implicitly converted
to `NodeIdOneOf<T, U>` if `T::Kind == K` or `U::Kind == K` (executing a
TODO).
Many of the `parse_node` members were not converted since they would
have required more extensive changes. They have been marked with "TODO"
comments.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Goal is to increase type safety, though more work needs to be done (see
added TODOs).
Note that, after this change, check handlers corresponding to deleted
parse node kinds will no longer compile.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
The goal here is to make the representation more uniform so that we can
start adding different kinds of binding -- checked generic bindings and
template bindings -- across both function parameters and local `let`
declarations.
With this change, the entry in the parameter list for the function is
the name binding, not the Param itself, which has some ripple effects on
consumers of that list that want to access the parameter rather than the
binding. This is expected to change again when we start adding more of
the pattern matching SemIR, but this seems good enough for now.
Another incremental change to diagnostic formatting. I simply recurse
over all the tokens in the subtree of a parse node and construct a
`DiagnosticLocation` that covers all of the tokens.
I believe it's nicer for the user to be directed at the entire chunk of
source where the error is occurring rather then just pointing at the
bracketing/terminator tokens, but let me know if you all agree.
Since we switched to using the scope stack instead of the decl state
stack to hold information about the containing definition in #3460 , we
can now pop the decl state at the end of the declaration instead of the
end of the body of the definition.
Most of the calls to `StringifyType` already passed `true` for
`in_type_context`. Checking the rest, I found that every one of them was
already sufficiently clear that they were printing a type, or could be
made so with a very small change to the diagnostic text.
This gets to a lifetime subtlety, particularly with things like the
sorting diagnostic consumer that delay output. In order to reduce the
chance of accidental references, disallow StringRef in the diagnostics.
For example:
```
./toolchain/diagnostics/diagnostic_emitter.h:162:5: error: static_assert failed due to requirement '!std::is_same_v<llvm::StringRef, llvm::StringRef>' "Use std::string or llvm::StringLiteral for diagnostic lifetimes."
static_assert(
^
toolchain/check/convert.cpp:477:11: note: in instantiation of member function 'Carbon::Internal::DiagnosticBase<std::string, std::string, llvm::StringRef>::DiagnosticBase' requested here
CARBON_DIAGNOSTIC(StructInitMissingFieldInConversion, Error,
^
./toolchain/diagnostics/diagnostic_emitter.h:47:7: note: expanded from macro 'CARBON_DIAGNOSTIC'
::Carbon::Internal::DiagnosticBase<__VA_ARGS__>( \
^
```
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Implement toolchain support for `returned var` and `return var`.
- Modeled `returned` in the parse tree as a `ReturnedSpecifier`
appearing after the `VariableIntroducer`.
- Modeled `return var` in the parse tree as a `ReturnVarSpecifier`
appearing after the `ReturnStatementStart`.
- Factored out the implementation of `return` statement and `returned
var` handling in check into a new `return.{h,cpp}`. The parse nodes
themselves are still handled in `handle_*.cpp`. This allows easy code
reuse between `return` and `returned var`.
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
When declaring a name such as `fn Ns.Class.F() { ... }`, enter the
scopes of `Ns` and `Ns.Class` as we form the name, and remain in those
non-lexical scopes until the end of the declaration.
When performing an unqualified lookup, look in any enclosing non-lexical
scopes in addition to looking into the lexical name table.
We now track a scope index with each lookup result in the lexical name
lookup table. This is used to determine whether a lexical or non-lexcial
result is the innermost result and whether a declared name is in the
same scope as some previous introduction of that name or in a nested
scope. For now, this could just be the index into the scope_stack, but
the intent is to also use this to detect names being declared after they
are first looked up, which requires the indexes to outlive their scopes,
so we use a persistent numbering of all scopes instead. The persistent
numbering also permits more invariant checking.
Following up on discussion yesterday regarding this split.
Note, I'm expecting #3341 to do IdentifierId -> NameId in SemIR. It
might be worth adding NameId creation directly to StringStore if you're
content with this setup though.
This replaces the use of `VarStorage` in this case.
Add an `UnboundFieldType` type as the type of a field, in cases where
it's referenced without an accompanying object.
Add a `BindName` node to describe the name binding performed for both
variables and fields so that we can handle them more uniformly.
1. In general, `semantics_ir` -> `sem_ir`, to match the directory name.
2. For the list of `ValueStore`-related accessors on `SemIR::File`, add
them to `check`'s `Context` object, shortening access.
Finishing what #3316 started, add more bespoke ValueStore-like
structures to File. With this, the things which previously had somewhat
boilerplate Add/Get functions are now all on side classes, giving a
uniform style of API for calling.
Note, I was on the fence about making things public on ValueStore. If
it's preferred that I make some things there protected I certainly can,
there's just a trade-off that may mean more distinct child/wrapper
types.
Building on #3313, start using ValueStore on File. Functions and classes
are straightforward. Types here I present as a borderline case where
maybe we want a more bespoke API, but maybe this is okay? Most other
things probably need a slightly different API, which although I might do
that for a consistent interface, felt more out-of-scope for this change.
Split `node.h` into separate files for ID types (`id.h`) and for typed
nodes (`typed_nodes.h`). The per-node-kind data is now specified as part
of declaring the typed nodes, and is removed from the node kinds
x-macros, which now simply enumerate the node kinds.
Building on #3311, change SemIR to use the SharedValueStore. Since this
removes hermeticity, raw output no longer prints ints, reals, and
strings. TokenizedBuffer accessors are modified to return IDs because
values are often passed through in semantics without needing to read
them.
I would've put SharedValueStores on Context, except for the
GetArrayBoundValue convenience method. I felt awkward removing that, so
it's on File, at least for now. That's then used by the formatter and
Lower too. The flipside of this is that TokenizedBuffer has a
SharedValueStores only for printing, so maybe that's similar enough to
what File is doing.
This doesn't start shifting other SemIR members to ValueStore, but that
seems like a next step.
This updates lexing to use the data. I'll do checking separately, just
to split changes.
Note the ValueStore structure is also set up such that SemIR::File can
use it for other fields.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This includes being able to define a class that was previously
forward-declared, and being able to define a member function out-of-line
that was previously declared inside a class.
No support for fields or methods yet, and a class definition doesn't yet
cause the class to be treated as a complete type.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Incomplete types may be nested within other types; for example, a tuple
type might have an incomplete type as an element. Handle such cases by
walking through nested incomplete types when completing a type. This is
done non-recursively in case a very complex type is formed.
Types are generally no longer completed at the point where they're
formed. Instead, we attempt to complete a type when it is used in a
context that requires a complete type, and diagnose if the type cannot
be completed at that point. This will be necessary for classes, which
can become complete after their first use, and helps tease out bugs
where a type completeness check is missing.
Bug found by fuzzing. Problem was untyped SemIR nodes had an invalid
type id, which was retrieved by `HandlePrefixOperator` and then passed
to `context.GetUnqualifiedType`, ultimately performing an invalid access
in `semantics_ir_->GetNode`.
We prefer to make a placeholder type for functions and namespaces to
remove the need for checking for the untyped case everywhere. Eventually
functions will have their own types, but this approach will be needed
for namespaces (and perhaps other non-first-class entities like unbound
methods and interface members) long term.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Replace `SemIR::Node::GetAsFoo` and `SemIR::Node::Foo::Make` with
`SemIR::Foo` class that represents a particular kind of node, with named
fields.
Rename `SemIR::IntegerLiteral` and `SemIR::RealLiteral` to
`IntegerValue` / `RealValue` to better reflect their purpose and avoid a
name collision with the corresponding `SemIR` node kinds.
Remove `NodeKind::Invalid` and the `SemIR::Node` default constructor
entirely, as they were not used for anything.
Jon Ross-Perkins
Richard Smith
josh11b
Jacob Schneider
Geoff RomerandRichard Smith