Mainly because "sorting_diagnostic_consumer" is legacy, since
`SortingDiagnosticConsumer` became `SortingConsumer`. Also better
reflecting contents of these files.
Where I'm not renaming, I'm less positive about dropping "diagnostics"
from "file_diagnostics" and "null_diagnostics" (which contain both a
consumer and emitter, and "null.h" seems like poor naming), so not doing
that here. Also "diagnostic.h" contains `struct Diagnostic`, so is a
decent fit.
Assisted-by: Google Antigravity with Gemini 3 Flash
Adds a flag `--optimize=<mode>` that specifies what to optimize for:
* `--optimize=none` turns off the optimizer as much as possible, but
still respects always_inline.
* `--optimize=debug` aims to be the equivalent of `-Og` / `-O1`, and
provides optimizations that don't affect the ability to debug the
program. This is the default.
* `--optimize=size` optimizes for the size of the produced program, and
aims to be the equivalent of `-Oz`.
* `--optimize=speed` optimizes for the execution time of the produced
program, and aims to be the equivalent of `-O3`.
Following the approach taken by Clang, the optimization level feeds into
both the configuration of the LLVM pass pipeline and the attributes
added to function definitions generated by the frontend.
Optimization is performed in a new phase, `optimize`, which runs between
`lower` and `codegen`.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
We'd been discussing that explorer remains necessary for print, and I
was wondering if this kind of approach would be okay (we _probably_ want
this to work, based on #2110, albeit with more overloads -- but I don't
think there's a good way to support overloads at the moment).
```
╚╡../bazel-bin/examples/sieve
2
3
5
7
11
13
17
19
23
29
31
37
41
43
...
```
Similar to #3705, we actually have a mix of `Make` and `Create` in
factory functions too, so this PR is normalizing on `Make`. It's
intended to be consistent with the naming choice for Carbon factory
functions.
Note, MakeSyntheticBlock is the only one I feel a little weird about
because llvm's own APIs use Create, and this is essentially wrapping
LLVM calls. But the flipside is it also feels like a vague line to draw,
when we also differ from LLVM coding style in other ways.
Per their documentation, the `llvm::Initialize*` functions are only
supposed to be called by the main program, not by a library like
toolchain/codegen. Fixes a hang due to a data race in multithreaded
autoupdate.
Add a utility class `Carbon::InitLLVM` to do the common LLVM
initialization shared by all Carbon tools, optionally including
initializing the LLVM targets. Because the LLVM targets add a lot of
binary size, only initialize them for binaries that opt in by depending
on a new target `//common:all_llvm_targets`.
Also fix `//explorer:file_test` and `//explorer:file_test.trace` to
share a binary rather than linking an identical binary twice.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
A lot of this is more boring "remove unused header", plus some other
minor cleanups. I think the most significant changes were:
- yaml_test_helpers.cpp is doing a switch on an unsigned int, comparing
to enum values.
-
[bugprone-switch-missing-default-case](https://clang.llvm.org/extra/clang-tidy/checks/bugprone/switch-missing-default-case.html)
is unhappy with EnumBase, but correctly identified
yaml_test_helpers.cpp, so I'm opting to address it rather than disabling
it even though it needs NOLINT in several locations as a result, in
addition to what I think are some low-value `default` cases. I'd be fine
going the other way with this too and disabling it globally (I could see
it being noisier in the explorer).
- MarkInitializerFor swaps the argument names between the .h and .cpp. I
think the .cpp had the order as intended.
- There's a new-ish
[performance-enum-size](https://clang.llvm.org/extra/clang-tidy/checks/performance/enum-size.html)
which I'm basically treating as "add int8_t to enums".
My main motivation here is to just clean up as many of these as I can so
that I stop seeing them in vscode.
This also tries to restructure the command line interface to the
toolchain a bit to make it start operating more like a compiler that
could be integrated into a build system rather than primarily as
a testing tool.
1) This switches form a `dump` subcommand to a `compile` subcommand
which has "dump" actions that can be enabled within it.
2) A distinct set of compile _phases_ that match the toolchain
structure:
- `lex` to run the lexer
- `parse` to run the parser
- `check` to fully check that the code is valid
- `lower` to lower to LLVM's IR
- `codegen` to generate executable code
3) The codegen phase has two output formats: textual assembly and
a binary object. These outputs can be configured, with a default for
an object when writing to a file and more firm default for textual
assembly when writing to stdout.
4) Select and expose the use of the LLVM host detection to compute
a default code generation target in the driver so that the command
line interface can reflect this. For example, the `help` output will
include the default target.
5) The `//toolchain/codegen` library APIs have been restructured a bit
to make the code flow a bit more naturally when implementing the new
command line structure. No real changes to the logic though.
There are also some minor tweaks to the command line interface based on
trying to use the shortest names for things that still seem likely to be
learnable for users:
- Switched `target-triple` to just `target`: the "triple" component to
this name is historical and can be confusing. For example, almost all
"triple" strings have more than three components today.
- Switched to just `--output` as now the fact that it is a file can be
configured in the documentation -- it will render as `--output=FILE`.
This also adds support for two custom output filename modes. First, when
no output is specified, we now compute one in the conventional way for
compilers by removing the file extension of the input file and replacing
it with `.o` for an object file output or `.s` for an assembly file
output. This matches the behavior of Clang and GCC for example.
Second, output to stdout is enabled with the special output file name of
`-` since it is no longer the default. This also follows the convention
of most compilers and many other command line tools to use `-` as a file
name to signify using standard in/out pipes.
There are still some rough edges here that I suspect could be improved,
but this seems like a good start of switching over to a complete
argument parser.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Lucile Rose Nihlen <luci.the.rose@gmail.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This pr creates the object file for the carbon code that returns either
0 or 1. The command to convert the object code to binary is `clang
<object_file_name> -o <binary_name>`
---------
Co-authored-by: Farzana Ahmed Siddique <fasiddique@google.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Jon Ross-Perkins
Aiden Grossman
Thomas Köppe
Boaz Brickner
josh11bandJosh L
