Commit Graph
125 Commits
Author SHA1 Message Date
Richard SmithandJon Ross-Perkins 187a3608df Use As and ImplicitAs interfaces for conversions. (#4209)
Add these interfaces to the core library. For now, they're two separate
interfaces because we don't yet support one interface extending another.

This collapses a lot of the layering in check: for example, the call
building logic depends on implicit conversions, conversions now depend
on the overloaded operator machinery, and that machinery depends on
building calls.

In passing, improve the diagnostics for failing to find a name required
from the prelude. Also convert all the transitively-called code from
`NodeId` to `LocId` given the latter is what the conversion machinery
has available.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2024-09-05 23:39:58 +00:00
Richard Smith 3c4c234d01 Treat the empty inst block as being canonical. (#4199)
TryEvalInst was assuming this to be the case when forming canonical
constants, but it previously wasn't.

This fixes an issue where we can end up with two identical-looking
constants for an empty struct value: one with an `Empty` block and
another with the canonical empty block.
2024-08-07 21:58:28 +00:00
Richard Smith b3fcaf9969 Initial rough support for deducing generic arguments in a call to a generic function. (#4184) 2024-08-02 22:44:51 +00:00
Richard Smith a9e835f3dc Remove caching of return slot usage. (#4163)
The caching isn't buying us much, and is adding complexity and
divergence between the codepaths for generic and non-generic functions.

This means we no longer suppress diagnostics for the second or
subsequent time we call a function with an incomplete return type. If we
want to add that back, it might be worth considering moving the
suppression to `TryToCompleteType` and only diagnosing that a type is
incomplete once, regardless of why we're requiring it to be complete.
2024-07-25 20:29:59 +00:00
Richard Smith 3cb769a053 Rename "generic instance" to "specific" throughout the toolchain. (#4165)
As discussed in toolchain meeting, we want to avoid overloading the
meaning of "instance", and "specific" was the best name we found. It's a
little unorthodox and inventive, but hopefully over time will become as
unsurprising as the term "generic" is.
2024-07-25 16:42:01 +00:00
Jon Ross-Perkins bf89652a4d Move common entity fields to a 'base' struct. (#4161)
I'd considered moving DeclParams uses over, but when handling qualified
names, there's a parse node instead of an instruction. I did try to
unify a couple other uses though, including adding MergeDefinition. I
expect `interface` will use a little more once it's more completely
implemented, but maybe I'm wrong about that.
2024-07-24 23:26:00 +00:00
Richard Smith 07bad72d86 Support for calling non-generic methods in a specific class. (#4156)
Use the specific parameter types for checking, and the specific return
type as the type of the call.
2024-07-24 20:27:01 +00:00
Jon Ross-PerkinsandRichard Smith 7ded56ef35 Improve namespace handling in imports. (#4153)
This implements a few closely related features:

- Starts merging namespaces discovered inside imports.
- Stores results of cross-package name lookup as an entry inside the
scope.
  - Note this is particularly visible with `i32`.
- Moves more of the imported instructions to the import scope.

Note this is primarily for executing the namespace TODO in check.cpp,
which is removed here.
`testdata/namespace/merging_with_indirections.carbon` tests key
behavior.

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2024-07-24 19:56:17 +00:00
Richard Smith fc8e686607 Rebuild all constants in the eval block. (#4155)
Instead of reusing instructions from the generic entity in the eval
block, rebuild constants in the same way we rebuild types. The previous
attempt to not rebuild these constants assumed that every constant used
in a generic would be built in that generic, and not referenced directly
or referenced from some enclosing scope, which isn't true in practice
and is a fragile assumption in any case.

We could add back some reuse of instructions from the generic -- if we
happen to see the right instruction to build a constant, we could
opportunistically reuse it -- but given the complexity added by doing
so, I'm not pursuing that here.

Now that the eval block for a generic consists of instructions uniquely
owned by that generic, rather than often being shared with another
entity, include the generic in the formatted SemIR output. I'm using the
same scope name for the generic object itself as for the parameterized
class / function / interface, because there are very frequently
references between them and this keeps the IR simpler and more readable,
and avoids needing to invent a second name for the scope.
2024-07-23 21:51:08 +00:00
Jon Ross-PerkinsandGeoff Romer 07c286e3cb Use the package/library name in ImportIRId formatting. (#4154)
Also adds import_ir_scope to namespace formatting. I'd done this as an
aid for #4153, and am splitting it out.

---------

Co-authored-by: Geoff Romer <gromer@google.com>
2024-07-22 22:43:36 +00:00
Geoff Romer 326609857d Rename BindNameInfo to EntityName (#4090) 2024-07-19 22:43:50 +00:00
Richard Smith dde0bd0ffe Change TypeId to be a thin wrapper around ConstantId. (#4140)
This better follows the principle that types are simply constants of
type `type`, and allows more uniform treatment of types as just another
kind of constant from generics handling.

Use a hash table to map from `TypeId` to information about the complete
type. This makes basic operations on types a bit simpler, and operations
that actually need to access the complete class information a bit more
complex.
2024-07-17 22:46:03 +00:00
Richard Smith fe359b1a08 Substitute into generic class and interface definitions when we require them to be fully defined. (#4139)
When referring to a constant within a specific, such as a field of a
generic class, use that specific version of the constant's value.
2024-07-17 01:39:25 +00:00
Richard SmithandJon Ross-Perkins efea072be3 Compute specific constant values. (#4128)
When forming a specific (previously called a generic instance), evaluate
the eval block of the generic to determine the values of any constants
used in that specific. The majority of the work here is updating
eval.cpp so that it can use the results of prior evaluations in the same
block when computing later values.

Include the computed results in the formatted SemIR output.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2024-07-15 23:59:23 +00:00
Richard SmithandJon Ross-Perkins 50d56aa7c9 Add an instruction to represent a use of a dependent value from a generic instance. (#4122)
We can't use the instruction from the generic directly, because it
doesn't have the right constant value. Instead add an instruction that
models the transition from the constant value in the generic to the
constant value in the generic instance.

Also start associating the self generic instance with unqualified
lookups that find results in an enclosing generic, so that we track the
information necessary to create the new instruction.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2024-07-12 14:59:01 +00:00
Jon Ross-Perkins a81d67c629 Rename Builtin to BuiltinInst, particularly to get BuiltinInstKind (#4115)
I'm trying to increase the distinction between BuiltinKind and
BuiltinFunctionKind. BuiltinKind is for instructions,
BuiltinFunctionKind is for function definitions. To get to this point,
I'm doing a few changes:

- BuiltinKind -> BuiltinInstKind
    - builtin_kind.* -> builtin_inst_kind.*: filename consistency
- Builtin -> BuiltinInst: mainly for consistency with the above
- Builtin::builtin_kind -> BuiltinInst::builtin_inst_kind: somewhat
repetitive but seems like a consistent edit
- Function::builtin_kind -> Function::builtin_function_kind: seems a
useful distinction

I'm leaving alone things like (and mentioning in case there's a desire
for more renames):

- InstId::BuiltinError, InstId::ForBuiltin: these I think are more
apparent because they're directly associated with Inst.
- GetBuiltinICmpPredicate in lowering: maybe builtin function handling
should be in its own file, but these local names don't feel problematic
to me.
- GetBuiltinType, BuildBuiltinValueRepr, PerformBuiltinIntComparison:
similar to the above, names don't feel too problematic
2024-07-11 18:24:17 +00:00
Richard Smith 7322a1e220 Build a list of dependent constants to recompute in each instance of a generic. (#4110)
For each generic, build a list of instructions describing the
computations we need to do when resolving an instance of the generic:
this is a list of the instance-specific constants and types that the
generic uses. Another way of viewing this list is as a block of Carbon
SemIR code that is evaluated in order to form an instance of the generic
-- this is referenced in the code as the "eval block" for the generic.

For each instruction in the generic whose type or value is a symbolic
constant, replace that type or constant value with a symbolic reference
that says "to find the actual type or value, look at index N in the list
of values for the generic instance".

For an instruction with a symbolic constant value, we can just add that
instruction to our list. For an instruction with a symbolic constant
type, however, we may not have a corresponding instruction computing the
type within the generic and may need to build a new instruction, but
will reuse one where possible. In the case where we build a new
instruction, we use the existing substitution code to build the type
within the eval block.

For now, this transformation is only done in the declaration region of
the generic, not in the definition region. Also, we map back from the
symbolic references to the underlying constant value in a few places
where we will eventually need to do a lookup into a generic instance, in
order to avoid regressing the tests.
2024-07-08 22:29:37 +00:00
Jon Ross-Perkins 9581a1867d Move import refs to their own block. (#4103)
This executes on a TODO in AddImportRef to add instructions to their own
block instead of the File block. This has an important consequence of
removing a pattern from InstBlockStack that added to blocks not
currently at the top, cleaning up an issue for ArrayStack. The delta
here is then mostly in different formatting of the import refs, a
consequence of the separation.
2024-07-03 18:21:12 +00:00
Jon Ross-Perkins 5ebcbae2e8 Add a location to indirect imports. (#4098)
By adding an `ImportDecl` instruction, this creates something that can
be referenced through `ImportIRInst`.
packages/no_prelude/implicit_imports_entities.carbon is getting a test
of this (import_conflict and import_conflict_reverse).

Also re-packs ImportIR from 24 bytes to 16 on 64-bit, since I'm touching
everywhere that makes one anyways.
2024-07-03 17:34:39 +00:00
Richard Smith 6ecf4ce9a7 Store additional information for symbolic constants. (#4102)
When forming a `ConstantId` for a symbolic constant, add storage to
track the generic in which the constant was formed and the index within
that generic. These fields are not yet populated.
2024-07-02 22:38:19 +00:00
Jon Ross-Perkins 8218769e5e Fix quirks in debug printing (#4088)
So, I noticed that ImportIRInst didn't print properly while trying to
debug an issue, and that's where this started. Then I was sort of trying
to figure out why we have "type_blocks" but "typeBlock", so trying to
make that more consistent. "importIRInst0" felt more odd than
"import_ir_inst0" which is why I'm suggesting down this particular
route, but let me know if you'd prefer the reverse (but then do we also
do "typeBlocks", etc, removing the consistency with the member name?)

Also starting to print more detail on import_irs, and added
import_ir_insts (adjusting formatting for that too).
2024-07-01 18:03:47 +00:00
Richard Smith a0d767246f Add GenericInstance type to represent instances of generics. (#4085)
Also add a corresponding value store and YAML output.

We don't create any generic instances in this change; this is just
adding infrastructure for future changes.
2024-06-26 22:44:12 +00:00
Richard Smith e7b0529957 Create a Generic object to represent a generic. (#4081)
Build a `Generic` object for generic functions. This object tracks the
generic parameters that are in scope for the generic entity. Eventually
it will track other information about the generic too.

Add basic SemIR formatting support for generic functions.
2024-06-26 20:13:26 +00:00
Richard Smith e3c15edb92 Remove return_type_id from Function. (#4051)
Instead of redundantly storing both the `return_type_id` and
`return_storage_id`, where the declared return type is just the type of
the return storage, store only the `return_storage_id`.

Add a convenience property to get the declared return type of the
function.

In addition to avoiding storing redundant information, this is a
preparatory step for an upcoming change for generics support that will
make it more expensive and awkward to store `TypeId`s in places other
than the type of an instruction.
2024-06-13 22:01:21 +00:00
Jon Ross-Perkins ac2428acaf Start unifying let/var handling. (#4032)
Merges handle_let.cpp and handle_variable.cpp into a single file in
order to take better advantage of commonalities.

Both still have a bunch of kludges, and there's still divergent handling
in handle_binding_pattern that will yield different results. However,
this fixes some things about `let` like starting to make use of
global_init (imperfectly, due to how VarStorage works, I grant), and in
particular adding `let` names to a name scope, not just lexical lookup.
2024-06-07 20:08:31 +00:00
Richard Smith 1c07f959a8 Format types in SemIR using the formatting for their instruction. (#4035)
Don't use the pretty-printed type name, because that's intended for
diagnostics, not for a theoretically machine-readable format like SemIR.

Types are always constants, so omit the leading `constant.` on the type
instruction name.
2024-06-06 15:12:48 +00:00
Richard Smith 9a11e977b3 Improve formatting of the type of a function or generic class name. (#4033)
Don't format the *type of* the function `F` as `"F"`. Instead use
`"<type of F>"`.

Also improve instruction naming for function and generic class name
values: name the value after the function or generic class, and add a
`.type` suffix to the type.
2024-06-06 00:40:43 +00:00
Jon Ross-Perkins d9c62b106d Rename enclosing scope to parent scope (#4020)
Following up on discussion from #3948, doing a general rename of
"enclosing scope" to "parent scope" (and "enclosing scopes" to "ancestor
scopes"). The intent is to improve understandability and collide less
with C++ terminology for "enclosing scope". Note this changes most uses
of "enclosing", but leaves behind a few like "enclosing function" and
"enclosing block".

Note this does create some "parent class" mentions for "adapt" and "var"
(the class they're within), which is maybe unfortunate, but we'd
probably say "base class" if we meant inheritance so perhaps that's
okay. Along the same lines, these are the only `parent_class` uses I see
now, and we do have a few `base_class`.
2024-06-04 19:57:14 +00:00
Jon Ross-Perkins 83413479d7 Move some of the test information to TIP lines (#4007)
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.

Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
2024-06-04 17:57:23 +00:00
Jon Ross-Perkins 55300d1ebb Switch type literals to use builtin functions. (#3978)
Modifies the core package and literal handling to use factory functions
for standard type literals.

Updates function/builtin/import.carbon to stop depending on the prelude,
since it would list all the impls in the core file. Updates
alias/builtins.carbon to be failing (the type values cannot be aliased).
2024-05-23 16:00:08 +00:00
Richard Smith 5c8fa6ad5c Replace FoldingSet with DenseMap for instruction canonicalization. (#3979)
Switch from recursing into non-canonical instruction fields to
separately canonicalizing those fields. This means we now form canonical
`InstBlockId`s, `TypeBlockId`s, `IntId`s, `FloatId`s, and `BindNameId`s
at least in the cases when they're referenced by a constant instruction.

This reduces the overall runtime for @chandlerc's 10MLoC example by
27.5% on my machine.
2024-05-23 00:48:49 +00:00
Richard Smith 23f9065949 Implement proposal #3927. (#3963)
Change syntax for package declaration to put the `impl` keyword at the
start and remove the `api` keyword.

To support this, rearrange processing of package, library, and import
declarations to use the general modifier handling support in declaration
parsing rather than special-case logic.

There is an ambiguity in `impl package.Foo as Bar`, which we resolve by
treating `package` as an introducer after a modifier only if it's not
followed by `.`.
2024-05-21 00:36:03 +00:00
Jon Ross-PerkinsandRichard Smith 76ed3c73cb Promote FunctionType to a standard instruction. (#3931)
This removes the builtin FunctionType, replacing it with a FunctionType
instruction. The constant for a FunctionDecl is now a StructValue with
type of FunctionType.

Note this means a function declaration produces _both_ a type, and a
value of the type. This has some consequences in terms of circularity,
and makes the importing of function declarations a little more complex.

It'll get particularly peculiar for imports because of the behavior of
the reference, but that's a known issue due to other things such as
`alias`. The impact will hopefully be contained to
ResolvePrevInstForMerge (and ImportRefs).

To note a small formatting change in diagnostics:

```
-  // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+  // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.

-  // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+  // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
```

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2024-05-03 15:18:04 +00:00
Jon Ross-Perkins e6061f6910 Update LLVM (#3932)
Fixes #3136, wherein the clangd patch is upstreamed so we don't need to
apply it anymore.

Updates goldens relative to a yaml output change in LLVM.
2024-05-02 23:29:43 +00:00
Richard Smith 008d41d7f3 Move instruction names for struct and tuple values from lower to InstNamer. (#3918)
Change the names for emitted globals for constants with storage to
include both the name of the constant and the name of the use.

This causes the instructions to also be named in SemIR and in LLVM IR
constants.
2024-04-26 23:47:08 +00:00
Jon Ross-Perkins de4c32beb5 Split apart some tests which don't need the prelude. (#3904)
This could probably go further, but I'm just trying to get the ability
to run some significant tests without the prelude. This already requires
some migration of `i32` and `bool` to non-prelude-dependent types
(technically not at the moment, but I'm trying to stick with the
philosophical model of the prelude).

Note this undoes part of #3895 which had made all lex/parse tests depend
on the prelude -- I don't think that was a necessary change. Rather, it
seems better to isolate individual lex/parse tests from the prelude. I'd
been on the fence in that PR (it was fixing one of the issues that
contributed to wanting to not include the prelude), but now it feels
more consistent. The prelude could have a parse error and we shouldn't
break every parse test on that.
2024-04-24 20:16:48 +00:00
Richard SmithandJon Ross-Perkins 62fe0cd385 Remove the builtin IR, and instead define builtin types locally. (#3910)
We don't need it any more, and removing it simplifies a few things:

- One fewer predefined `File` and reserved ID.
- We now have simply `Builtin` instructions for builtins, instead of
having an `ImportRef` that indirectly references a `Builtin`.
- `ConstantId`s now always refer directly to a local constant, instead
of sometimes referring to an `ImportRef` for a constant in the builtins
IR.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2024-04-24 18:32:59 +00:00
Richard Smith ccf87f0a38 Use computed constants in lowering rather than lowering instructions (#3905)
First steps towards using constant values in lowering.

For now, we reuse the regular instruction lowering to lower constants.
This mostly works, because we don't actually need an `llvm::Function` or
a current basic block when lowering a constant most of the time.
However, a special case is needed for lowering aggregate value constants
because they would otherwise create a stack alloca to store the
constant. Separate constant lowering code will be added in a future
change to clean this up.

When lowering a constant initializing expression, the result is a value
of the destination type, rather than code to initialize the destination,
so a separate copy step is required when finishing initialization from a
constant for a type that uses in-place initialization. Handling this
required extending `ReturnExpr` to track its destination location.

We currently often create non-constant `*_access` SemIR instructions
that are only used by constant `*_init` instructions. These cause
lowering to leave behind `getelementptr` instructions in the lowered IR
that are now unused. It should be possible to detect this case and avoid
producing these instructions, or to produce them lazily, but for now
we're just leaving them around for LLVM to clean up.
2024-04-23 16:23:24 +00:00
Richard Smith e0b8728263 Allocate de Bruijn levels to symbolic bindings. (#3906)
Use a level comparison during substitution to determine whether we're
substituting a particular binding. Evaluate symbolic bindings with the
same name and the same level to the same symbolic constant, for example
across redeclarations of a generic function.
2024-04-23 16:15:47 +00:00
Pablo Paglilla cae62765af Add builtins for basic float operations (#3897)
Adds support for unary `-` and binary `+`, `-`, `*`, `/` for floating
point types.

Real literals are now transformed to `llvm::APFloat`s during the check
phase into the `FloatLiteral` instruction.

This PR likely collides a bit with #3892 and might need to be updated
when that one is merged.
2024-04-19 22:50:54 +00:00
Richard Smith 015c7c780c Fix location of converted inst for explicit as conversion. (#3887)
Use the complete location of the `as` conversion rather than the
location of the first operand, so diagnostics referring to the result
point at the whole thing.
2024-04-15 23:22:44 +00:00
Richard Smith 1b335402d1 Allow incomplete return types in function declarations. (#3875)
Move completeness check to the point where the function is defined or
first called. This means we also defer deciding whether the function has
a return slot until that point. Instead of storing a return slot per
function, store the location of the return storage, which may or may not
be used, and compute and store a separate flag saying whether to use it
at the point of first use or definition.

This is the final piece in supporting simple `Make` functions in classes
as a replacement for constructors.
2024-04-11 07:23:56 +00:00
bb117aea3a Add support for iN and uN for all suitable N. (#3868)
`i32` is retained as a special case for now, for bootstrapping purposes,
and maps to `BuiltinIntType`, which is distinct from `Core.Int(32)`.
This will be removed later once we support `Core.BigInt`.

For now this provides both the `iN` types and also the builtins to
support `Core.Int(N)`. The intent is that we'll change the `iN` support
to rewrite to calls here when we do that for the other type literals and
type keywords.

No conversions between integer types are supported yet, and all literals
are of type `i32`, so we can't actually form values of any of these new
types.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
2024-04-08 10:09:02 +00:00
Jon Ross-Perkins 895e90e791 Start including the prelude for testing. (#3861)
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
  - Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.

I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
2024-04-07 17:11:42 +00:00
Jon Ross-Perkins 2361830592 Special-case api/impl implicit imports and verify relevant redeclarations. (#3843)
Adds ImportIRId::ApiForImpl to reserve a specific slot for the `api`
import, so that the code can trivially determine whether an import is
from the same library. This is then used for merging function
declarations, because the rules for redeclarations in the same library
slightly differ as compared to other imports (note they're also not
identical to same-file rules).

The main thing this leaves from the recent #3762 is verifying that
entities forward declared in the `impl` file are also defined, but
that's not in-scope for merging; it's moreso post-checking validation.

Note, a lot of our `invalid <entity> ID` comments in ids.h were
incorrectly copy-pasted, so I've cut `<entity>`.
2024-04-04 16:03:41 +00:00
Jon Ross-Perkins f8c8861e5f Change ImportRef to a triple state: Unloaded, Loaded, Used (#3831)
This doesn't significantly change logic, although I'm trying to add the
location to used state.

The issue I'm trying to address is how to identify a declaration as
"allowed to be redeclared". Consider:

```
library "a" api;
extern fn F();
```
```
library "b" api;
extern fn F();
```
```
library "c" api;
import library "a";
import library "b";
var x: auto = F();
fn F();
```

What currently happens is:

1. On import of "a", `F` becomes ImportRefUnused
2. On import of "b", `F` becomes ImportRefUsed in order to merge.
3. In "c", the call `F()` doesn't change the state.
4. In "c", the declaration `fn F();` needs some breadcrumb to understand
whether "F" has been referenced, as in step (3) here.

What I want to happen is:

1. On import of "a", `F` becomes ImportRefUnloaded
2. On import of "b", `F` becomes ImportRefLoaded in order to merge.
3. In "c", the call `F()` causes `F` to become ImportRefUsed
4. In "c", the declaration `fn F();` detects that `F` is already
ImportRefUsed, and can use the associated `used_id` for a diagnostic
about why redeclaring is invalid.

Note this PR isn't implementing (4). I'm focused on the refactoring to
add a new ImportRef state here.
2024-04-02 17:20:09 +00:00
Richard Smith 3763d0130a Convert literals to i32 when forming an i32-typed int_literal instruction. (#3814)
This is temporary: eventually per the design we should be forming
integer literals whose types reflect their values. But for now we should
ensure that values fit within their types.

This also fixes canonicalization of integer constants and hence of array
types, because we no longer have multiple different representations of
each `i32` value depending on the bit-width used for the literal.
2024-03-26 19:56:11 +00:00
Jon Ross-Perkins b8ceb8dd8b Print a blank line after a diagnostic. (#3806)
The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.

This is a trivial code change, but ripples edits through test files.
2024-03-22 18:10:49 +00:00
Richard SmithandJon Ross-Perkins abf23ae7fe Initial scaffolding for building a witness table for an impl. (#3743)
Add an instruction to hold the witness table, along with a corresponding
type to keep things simpler. Add `check/impl.{h,cpp}` to house the new
logic. No checking of impls against interfaces is performed yet.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2024-03-07 23:10:14 +00:00
Richard Smith 064123d93f If a SemIR instruction has a braced block and a constant value, print the constant value first. (#3734) 2024-02-29 23:51:32 +00:00