When a member access names an interface member, perform impl lookup to
find the impl and its corresponding member.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
A couple of minor functional changes here:
- We now always create a `name_ref` for the name referred to by the
right-hand operand of member access. Previously we skipped creating this
instruction if the referenced name was a field, and just created the
field access instruction. This makes our processing of member accesses
and our SemIR representation a bit more uniform.
- We now perform lookup into the type of the left-hand operand if it's
any type with a scope, not just for classes. This means we do lookup
into interface types. However, doing so isn't really useful yet because
it always finds an associated entity that isn't usable by itself. This
changes the diagnostic in
`toolchain/check/testdata/interface/fail_todo_facet_lookup.carbon`.
This handles toolchain failures per-file. The intent is to allow placing
both "success" and "fail" tests in the same file, using splits. However,
this PR only adds support and updates existing tests to continue
passing.
`Self` is modeled as a `bind_symbolic_name` with no corresponding value,
for now at least. In the future it might make sense to model it as a new
kind of instruction, or as a `bind_symbolic_name` whose value is a
`param`, but for now we just want it to introduce a symbolic constant.
In order to convert a value like the `Self` of an interface to a type, a
new instruction `facet_type_access` is introduced. This notionally
accesses the "type" field within a facet, converting it from a pair of
(type, witness) into just the type.
Previously we used the default inst block formatting, which writes out a
parenthesized list of references, which would always be 'unexpected
instref's because nothing else prints the instructions in the decl
block.
In addition, track the decl block for function declarations like we do
for other kinds of declaration. This means that the parameter
declarations for a function are now properly rendered into the formatted
IR. Note that this adds a lot of verbosity to `function_decl`, but it
does accurately reflect the IR, and we'll probably want this information
to be printed once we start supporting more complex generic function
declarations.
This removes almost all the 'unexpected instref's in our formatted
output. There are remaining cases when a declarative scope contains
multiple blocks, where we only track one of those blocks. That happens
when there is control flow within declarative scopes, and for error
recovery when a class or interface or similar is defined more than once.
As requested in #3730.
When declaring an associated entity in an interface -- just associated
functions for now -- create an associated entity value and corresponding
type to represent a "slot in a witness table". Also track the list of
associated entities on the interface so that we will eventually be able
to check impls against them.
Associated entities are represented as the integer index of their slot
in a witness table.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Follow the existing support for classes.
None of this is especially useful until other features land: we don't
yet have any use for defining methods of an interface out of line,
because we don't support `default` or `final` interface methods, and we
don't have impl lookup, so referring to an interface member is also not
especially useful. But this is a nice piece to factor out that's a
prerequisite for effectively testing other interface features.
Interface support is pretty skeletal so this may need additions later,
but I think it's still worthwhile to fill in the necessary bits now.
With this change, the expectation is then that everything we have right
now which _can_ be imported, is supported for import (at least for the
"current package, no overlap" case).
By adding a constant to ClassDecl/InterfaceDecl, we're able to remove
name reference special-casing. Use TryEvalInst on the Decl to generate
the Type. For ClassDecl, then use the generated constant for
self_type_id.
Consume the components of the `impl` declaration, and set up scopes for
the child elements. We don't yet build a representation for the impl
itself.
Also, add an interface type value. This is necessary so that we have a
value for the expression on the right-hand side of `as` in an `impl`.
This makes some changes to the formatter so that ImportRefUnused and
ImportRefUsed will both be labeled as "import_ref" with an "unused ->
used" argument change in textual IR, but is otherwise not changing
logic.
I'd excluded these initially just because I was thinking towards copies,
but under the current model I'm trying to catch all the decl types just
for consistency. Note references will still be a TODO error
(LazyImportRef is already tested for this, it just didn't feel necessary
to add individual tests while I try to sort out behavior).
Fixes an oversight where declarations in an entity's scope were being
added to the list of exports.
Note I'm trimming some Import API arguments as now-unused.
Building on #3636 which handles the general import case, add special
casing for namespaces. Namespaces can be combined cross-IR, so it's a
little more complex.
The implementation adds import_id to the Namespace instruction as a
reference to find the original using the normal structure. This is
achieved by moving the name_id to NameScope to free up space.
---
I considered a few alternatives...
I considered adding import_id to NameScope, but:
1. It's more consistent with things such as Function or Class that
provide name_id on the info object rather than the instruction.
2. I thought it more likely that there would be more NameScope cases
that might want a name_id rather than the import_id, since ImportRef
will typically be used.
I considered putting the import source (cross-ref IR id + inst id) on
the NameScope versus a separate ImportRef, which seems like the
strongest argument towards the NameScope approach because it removes an
instruction. That just felt inconsistent though, and the overhead of
instruction-per-imported-namespace should be low (theoretically few
namespaces should be used). Plus I feel a bit odd adding two
generally-unused ids to NameScope.
A specialized Namespace structure could also have been created to store
the import_id, but that would add an indirection to the NameScope.
Remove the type canonicalization mechanism and instead rely on constant
canonicalization to deduplicate types.
Rename the `Canonicalize*Type` functions to reflect that they're no
longer performing canonicalization. Switch code that creates types due
to semantic checking, rather than due to source syntax, to directly
create type constants through evaluation rather than creating an
instruction and evaluating it to produce a separate constant
representation.
The mapping from `const (const T)` that was previously performed by type
canonicalization is now implemented in expression evaluation instead.
The value `<error>` is now treated as a constant value, with a special
property that an instruction involving `<error>` that could possibly be
constant evaluates to `<error>`. This helps avoid producing follow-on
errors when an error occurs as a subexpression of an expression, such as
a type, that is intended to be constant.
This makes duplicate and previous definition handling match. While we
may want to make both point more fine-grained at the name, the necessary
logic seems likely to be equivalent.
Note, I'm looking at this mainly due to duplicate names in imports,
where it's especially helpful to take an instruction instead of a parse
node. We'll eventually want to handle parse nodes from other imports
better, and I think this is the way it would most likely work.
Rather than producing multiple constants with the same value, fold all
instances of a given constant to the same constant instruction.
A future PR will use this to replace the current type canonicalization
system.
This is accomplished by tracking an extra bit on the ID we store in the
constant values table, and propagating that from subexpressions to the
enclosing expression. This extra bit is not yet computed correctly for
types; that will be addressed in later PRs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Form a side table with constant values for each instruction. Evaluation
is only supported for a few very simple kinds of instruction for now.
This is not observable outside of the SemIR output, because nothing
depends on expressions having a constant value phase yet.
Namespaces are copied, which means also adding their name to the
underlying instruction. It happened not to be done previously; the name
was only in name lookup.
Since the only import supported right now is the default import,
functionality is limited; in the future I'll need to deal with namespace
vs package conflicts.
Tests of namespace imports are under "namespace" -- I figured this would
be best for scaling as more instructions get support.
This also improves some debugging-related output that I was trying to
use while trying to build the support.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Another incremental change to diagnostic formatting. I simply recurse
over all the tokens in the subtree of a parse node and construct a
`DiagnosticLocation` that covers all of the tokens.
I believe it's nicer for the user to be directed at the entire chunk of
source where the error is occurring rather then just pointing at the
bracketing/terminator tokens, but let me know if you all agree.
Richard SmithandJon Ross-Perkins
josh11b
Jacob Schneider