This is a step toward removing the index from `InitForm`, so that equal
form values always have equal representations.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This allows us to capture the location at which a type literal was used,
even in the cases where we don't otherwise need to create a new
instruction to represent the type such as for `char` or `str`.
The logic used to build the underlying type is now marked as desugaring.
For cases such as `iN`, this causes the call to `Core.Int` to no longer
be added as a dedicated IR instruction, and instead its constant value
is used directly as the value of the `type_literal`. This results in
this being on balance a reduction in the size of the IR.
This also fixes a crash in C++ interop when using a `char` literal as a
template argument. The crash was caused by the template argument not
having an associated location when mapping to a C++ location. See
changes to check/testdata/interop/cpp/template/type_param.carbon for an
example that used to crash before this change.
Update alias handling to allow an alias to point at any type literal,
reinstating support for aliases for type literals such as `bool` and
`i32` that had previously worked but stopped working when we
transitioned those types to being defined in the prelude. See changes to
toolchain/check/testdata/alias/builtins.carbon.
All the test changes other than the two mentioned above are mechanical
autoupdate changes switching to the new instruction.
Currently each interface has a `Self` facet internally that becomes a
binding to every entity inside the interface: associated constants,
functions, and require decls. Each of these has to be independently
generic as a result. This makes is challenging in extended name lookup
to move into an extended scope of an interface, as we have a specific
for the interface, but the names within require a different specific
that includes a `Self` facet value.
We generalize this relationship by adding a second generic to Interface,
called `generic_with_self`. When we want to work with entities inside
the interface, we move from the interface-without-specific to the
interface-with-self specific by adding a Self to the specific. This is
done independently of any particular entity inside the Interface, as
those entities are now all members of the interface-with-self generic.
Associated constants no longer need a generic of their own, as they do
not have separate generic bindings. Functions retain a generic, but if
the function has no generic arguments, it will have no bindings of its
own now.
Require decls retain a generic so that their specific can be
instantiated separately from the interface. Requiring the interface to
be complete does not require the types in a require decl to be complete
unless it is modified by `extend`. So we allow them to be completed
later by keeping them in a separate generic.
Named constraints look like interfaces and gain the additional inner
generic-with-self, with the same relationship to require decls.
This removes the need for name lookup to perform Substitution of a Self
facet into the extended scope instruction. Instead, the
`SpecificConstant` instruction inserted by a `require` decl is part of
the interface-with-self generic. When looking through a FacetType for
extended scopes, for each interface, we push the scope with the specific
for the interface-with-self. Then the constant value of the
`SpecificConstant` is correctly modified by the provided self
automatically through applying that specific.
The primary change in this PR is to split the `Initializing` expression
category into separate `ReprInitializing` and `InPlaceInitializing`
categories, depending on whether initialization uses the types
initializing representation, or is guaranteed to be in place. It also
rationalizes and documents the SemIR-level semantics of those categories
(including where #5545's "ephemeral entire reference" category will
fit), and introduces two new inst kinds to close gaps exposed in the
process.
Some additional secondary changes:
- Consistently format the storage arguments of initializers with `to`,
regardless of whether initialization is in-place, and document the `to`
notation.
- Rename some inst kinds and functions, and restructure some of the
code, for clarity and consistency with the new documentation.
- Resolve a TODO to handle more category conversions in
`CategoryConverter`, in order to make it easier to reason about category
conversions.
See #6588 and the review history of this PR for background.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
The key changes are:
- Function output parameters are now prefixed with `out`, and more
consistently formatted as named parameters.
- Function and inst output arguments are now written as part of the inst
form, rather than as one of the inst arguments.
As a drive-by fix, this also changes `Temporary::storage_id` from
`DestInstId` to `InstId`, because it doesn't represent an output
parameter of the `Temporary` inst itself.
See the review of
[#6532](https://github.com/carbon-language/carbon-lang/pull/6532) and
[this Discord
discussion](https://discord.com/channels/655572317891461132/999638000126394370/1458268977020141589)
for additional background.
Not all functions have a return slot, and once we have composite forms,
functions will be able to have any number of return slots. Obtaining a
unique return slot for a function only makes sense in `returned var`
handling.
The main changes here are:
- Introducing `InitForm` and `RefForm` to represent initializing and
reference forms (the two return forms currently supported by the
parser).
- Introducing the `FormType` singleton inst to represent their type
(i.e. `Core.Form`).
- Emitting an inst representing a function's declared return form as
part of handling the function signature.
The return form inst is currently ignored. Subsequent PRs will expose it
in `SemIR::Function` and use it to determine the form of call
expressions.
Pursuant to recent decisions on #6124, switch `Destroy` to use a
`CustomWitness` for its implementation. Right now this is manufacturing
no-op implementation functions on each lookup, which obviously isn't
ideal but is intended as a first pass. I'm mostly trying to find the
right balance between updating the approach to reflect new decisions,
while still breaking apart work in a way.
The `CoreInterface` logic is intended to build on `CoreIdentifier`
support. We have a number of additional interfaces that require
specialized logic, and that'll extend pretty far with C++ interop, so it
seemed easiest to have a generic function for it. That's what's
replacing the logic inside C++ interop that was doing string comparisons
(which could have already been moved to `CoreIdentifier`, I just missed
it in my first pass).
This adds `CustomWitness` support because the `Destroy` witnesses can be
imported cross-file. `CustomWitness` was previously only used for C++
types, which don't yet support import, which is why that wasn't
previously an issue. The addition of `query_specific_interface_id` is
similarly needed in order to get correct sorting of witness blocks when
imported.
This PR also removes builtin constraint logic (note this is in a
separate commit to help review; it's not a separate PR because it's
difficult to split apart without tests breaking). This had been made
generic with the expectation that destroy, copy, move, and conversions
would all need related support. Under the new decision, we are not going
to do blanket impls and will instead just manufacture a `CustomWitness`
for everything.
A lot of SemIR fingerprints change, but that's probably because the
addition of `Destroy` on core classes is yielding structural changes.
Instead of naming the root namespace `package` (because it's accessed by
the `package` keyword), change it to use the current package name. Note,
buried in the checksum changes,
`toolchain/check/testdata/package_expr/fail_not_found.carbon`:
```
- // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `package` [MemberNameNotFoundInInstScope]
+ // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `Main` [MemberNameNotFoundInInstScope]
```
for:
```
// CHECK:STDERR: var y: i32 = package.x;
// CHECK:STDERR: ^~~~~~~~~
```
I'll leave it to you if you prefer this; the alternative I see is to
just rename `IsCorePackage` to `IsImportedCorePackage`, and/or change it
to a helper that takes a `Context` and does the right thing with
`parse_tree` (which, I need for `Destroy`-related reasons and was my
default approach).
This is a prerequisite for support for interop with C++ template names.
No behavior change here, except that it sadly changes the fingerprinting
for a lot of tests.
This resolves a TODO in `expr_info.cpp` by using the inst kind rather
than the bound value to track the binding's category.
Since we're churning all the `bind_name` insts in testdata anyway, I'm
also taking this opportunity to align the inst naming with the design's
terminology, by calling these insts "bindings" (this aspect of the PR is
dependent on #6231 resolving an ambiguity in that terminology). For
consistency we'll need to rename several other insts as well (see the
TODO on `RefBinding`); I'm deferring that to a separate PR to minimize
the review load, but I think those name changes are in-scope for this
review.
Locations are similarly fragile, because adding a comment changes them.
This has made me pause when making prelude changes in #6144, so dropping
them for those cases.
Instruction ids aren't actually that interesting outside debugging, and
can be churny when doing other structural changes. I've seen this in
particular when doing singleton changes, which bump every instruction
id.
Note there are still other ways fragility from locations can crop up.
This shouldn't be considered a complete fix, but hopefully a small
improvement.
This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):
```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";
// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```
That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.
The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.
A few alternatives considered were:
- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Instead of hardcoding which types are copyable, add a `Core.Copy`
interface to perform copying. Move almost all the current copy support
to that interface. Some remaining pieces are still using builtin logic
after this PR:
* For tuples and structs, builtin logic is used to perform elementwise
copies. This also supports copying *adapters of* tuples and structs,
which seems like it may not be desirable, especially for non-extending
adapters. A `Copy` impl is provided for tuples of at most 2 elements, so
that `Core.Copy` constraints are satisfied, but we can't implement this
generally until we have variadics support, and don't yet have a
mechanism to generalize this to structs.
* For `enum` types imported from C++, builtin logic is used to perform a
copy. This is temporary until we have a mechanism to identify these
types from an impl in the prelude.
One lowering test in `toolchain/lower/testdata/class/generic.carbon` is
disabled for now, as it causes a crash in the lowering code due to an
ABI mismatch between the call signature in the lowered declaration of a
specific function and the call that is generated in the specific callee.
Fixing this is a little involved, and will be done in a separate PR.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Add missing builtins for float compound assignment, for building a
FloatType, and for converting a float literal to FloatType. Switch
`Core.Float` to being a class and add impls for the various
floating-point operators.
---------
Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of treating `Core.Int` as the toolchain's builtin `IntType`,
model it as a class that adapts the builtin type. This aligns us better
with the intended language model, gives an associated library for
`impl`s involving `Core.Int` to live within, and opens the door adding
member functions to `Core.Int` if we decide that is desirable.
Remarkably it also seems to make the formatted SemIR a little smaller,
because a call to a generic class generates less IR than a call to a
function.
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
- Do not include entities imported from files that we are not dumping.
- Do not include constants and import_refs that are not referenced by
something that we are including in the formatted output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
This instruction represents integer values, whether they come from
literals or calculations, so it the old name is inaccurate. I also plan
to rename `BigInt` to `IntLiteral` based on recent discussion and this
change aims to avoid confusion stemming from the same name being used
for two different things.
I'm not renaming `FloatLiteral` because recent discussion suggests we
may want distinct `FloatLiteral` versus `FloatValue` representations in
SemIR.
This is in particular to avoid churn from changes such as #4370. I think
the import list can be helpful (particularly to understand what the
library is aware of), but it's a different trade-off for the prelude
package due to the implicit imports.
This PR makes it so that types can implement the `IndexWith` interface
so that they can provide their custom indexing behavior.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Also propagate the pattern IR along with the pattern-match IR, and use
it where appropriate.
Strictly speaking, some parts of the pattern-match IR are allocated
eagerly, while traversing the pattern's parse tree, but they still
aren't actually emitted until we traverse the associated pattern insts.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Dana Jansens
Geoff Romer
Calvin
josh11bandJosh L
Brymer MenesesandJon Ross-Perkins