This handles namespacing of functions. Parsing and semantics are changed
significantly, while lowering works without changes. Variables can't be
namespaced yet because they're dealing with patterns, and I didn't dig
through that code.
Most of the logic is done through the new name declaration stack, which
is necessary because semantics isn't quite sure where the declaration
name ends. It'd be complex for parsing to send a signal about this,
probably involving node variants and rewrites of the tree, and this
solution seems to work well. Unfortunately this means a new stack, but
that may be inevitable due to the extra information needing to be
tracked.
Note this doesn't deal with scoped lookups of non-namespace things,
which we'll need for generics. That'll probably involve pushing resolved
scopes onto a stack (or maybe just setting a singleton value?) to affect
contextual name lookup. But, I think the basics are there to make it
work when we can test the behavior.
This renames "designator expression" to "qualified expression" and adds
"qualified declaration" in order to use terminology more consistent with
C++.
Namespaces will probably need to be considered for name mangling down
the line, but this still uses the basic name.
- `xor` keyword is removed, with `^` used in its place.
- For consistency, also replaced unary `~` with unary `^`, as those
changes come from the same proposal.
- `type` keyword is added.
- To keep existing tests working, parsing support for `type` literal is
added too.
- `is` keyword is removed; we'd already added the `impls` keyword to the
list.
- Several other missing keywords added.
This PR renames parse nodes on a Name/NameExpression taxonomy. NameExpressions occur in a name context. The difference is that in non-expression contexts it's useful to return the identifier / string ID for adding to name lookup, whereas in expression contexts it's useful to return the resolved node ID for consistency with other expressions.
In the code, I do note SelfValueName is returned in the expression context: I'd expect this to change, as `self` in `[self: Self]` versus `self.Foo()` will probably be best handled similarly to the above. That means that, in the proposed taxonomy, both `SelfValueName` and `SelfValueNameExpression` will exist in order to assist semantics.
To contrast choices:
Original | Current | [zygoloid suggestion](https://discord.com/channels/655572317891461132/655578254970716160/1121581663399464970) | [This PR](https://discord.com/channels/655572317891461132/655578254970716160/1121814551789318215)
--- | --- | --- | ---
DeclaredName/DesignatedName | Identifier | NameComponent | Name
NameReference | NameReference | NameReference | NameExpression
SelfValueIdentifier | SelfValueIdentifier | SelfValueReference | SelfValueName
SelfTypeIdentifier | SelfTypeIdentiifer | SelfTypeReference | SelfTypeNameExpression
This is just a simplification: I think these different forms are getting in the way more than they're helping, particularly as I was looking into namespace functionality. The handling in semantics can be identical, providing a more uniform behavior.
We model `if a then b else` as a prefix operator for parsing precedence purposes. The rule that a statement starting with `if` is never an `if` expression is handled implicitly because the statement parser never invokes the expression parser for a statement starting with `if`.
This exposed a bug in our diagnosis of the whitespace rule for prefix operators, which was incorrectly being applied to non-symbolic operators in some cases, and was producing a bogus second diagnostic in some cases, which is also fixed here.
This is addressing an issue left behind by the context switch, removing a few diagnostics that had been in the header rather than figuring out proper homes. I'm splitting one for semis a little further, sharing one, and then the other two are actually able to be moved into more specific homes as-is (one is only used in one place, clearly an oversight that it wasn't there already).
The intent of this change is that instead of paths looking like `explorer/testdata/foo/bar.carbon` (repo-relative), they're now just `bar.carbon` (local). The consequence is that paths should be a bit more durable in various environments, and just paths should be shorter and easier to read.
The explorer's prelude is an exception to this since it comes from data, rather than being the test target. Due to the change in approaches, it needs the regex again.
Uses #2829
This builds on #2814 by adding the test framework to the toolchain. On Linux, this is 7s -> 4s for me. #2811 has more detailed timing for the explorer, which also had more dramatic changes because it's about 3x more tests run in 2x as many ways (6x total).
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
At present, `var *;` is a crash because it has errors that weren't being properly stored/handled. This changes the handling to give more to track invalid parses in patterns.
Also make minor updates to the skeletal design in
docs/design/name_lookup.md following #2113, as there are no longer any prelude names that are made available to unqualified name lookup by default.
Add `type` to the keyword list in
docs/design/lexical_conventions/words.md, following #2360.
The problem I'm trying to solve is: `var x: i32 = x;`. This change makes it so that name lookup fails, by removing `x` from name lookup between the `=` and `;`.
`var x: i32` still adds to name lookup to handle future situations like `var (x: i32, x: i32);` which is still a redefinition of `x`; if we don't add `x` to name lookup, it gets harder to catch that example.
The VariableDeclaration/VariableInitializer refactor in ParseTree supports this by given a bracketing-like structure for semantics to cue that it's entering an initialization expression. With this, VariableInitializer can remove the name lookup and queue it to be restored. VariableDeclaration doesn't need to change too much since it's still bracketed by VariableIntroducer, and so we just traverse slightly differently.
Note this also incidentally changes a little about NameReference, that it's returning the storage consistently instead of the name. You can see this e.g. in global_lookup.carbon, `Assign(node8, node4): node2;` using node4 (VarStorage) instead of Node5 (BindName). Really either _could_ work, since from a BindName we can get to the VarStorage, and that may be reason to switch later if we find it preferable to have the BindName for whatever reason.
But the *actual* value in NameLookup is a BindName so that errors can associate with the _name_ instead of the "storage" parse node, which is currently the `:`. This is mainly for fail_duplicate_decl.carbon, which has a "Previous definition" note that points at the storage's parse node.
I think it'd be helpful to examine what the parse tree looks like in failure cases.
Note, I'm not sure that the behavior of the recovery situations is correct; the test had been asserting that the parse tree should indicate it's error free. However, this means that the only signal the the driver that the input is invalid is that the diagnostic emitter was used. I think it may be important to have it return a non-zero error to prevent compile, or we can turn these into warnings but then "requiring a space" is wrong.
Either way, that's a concern I have with the pre-existing recovery behavior: I'm just trying to highlight it as I make this change, because now the test is really that nodes aren't tagged with has_error.
- Finishes remaining "todo" parse nodes.
- Improving error recovery for invalid designators and structs, so that the parse tree still looks similar to a valid parse tree.
- Call expressions now have the thing being called as a child (of the start) instead of a sibling.
- Use of Start is replacing use of End in several parse nodes, like structs and call expressions.
- Adjusting documentation of parse node structures in an attempt to make it more consistent and understandable.
- The current state for interfaces and if/else is mostly being documented, not altered.
This works on multiple statements to make them better for the bracketing model. Stub nodes are added in more cases of invalid syntax, simply so that the semantics has reliably structured input. Comments in parse_node_kind.def now try to show the expected parse tree structure in postorder form.
This labels If, While, and For a little differently in parse nodes so that at the start of the postorder traversal, it'll already be available to semantics which structure is being processed. I need to do a little more with If in particular, but this felt like a reasonable stopping point.
While this makes significant parser changes, the changes to parser_state.def are minimal, mostly naming-related. The actual flow isn't substantively changed, just a couple minor names and the new As(If|While) state which allows distinguishing IfCondition and WhileCondition.
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Adds `while` and most of the expression support. Splits apart the fixity test to demonstrate more closely which bits are still failing.
```
//toolchain/parser/testdata:basics/fail_paren_match_regression.carbon.test FAILED in 0.8s
//toolchain/parser/testdata:basics/function_call.carbon.test FAILED in 0.7s
//toolchain/parser/testdata:basics/package.carbon.test FAILED in 0.7s
//toolchain/parser/testdata:basics/structs.carbon.test FAILED in 0.7s
//toolchain/parser/testdata:basics/tuples.carbon.test FAILED in 0.6s
//toolchain/parser/testdata:basics/var.carbon.test FAILED in 0.7s
//toolchain/parser/testdata:for/fail_colon_instead_of_in.carbon.test FAILED in 0.7s
//toolchain/parser/testdata:for/fail_missing_in.carbon.test FAILED in 0.7s
//toolchain/parser/testdata:for/fail_missing_var.carbon.test FAILED in 0.7s
//toolchain/parser/testdata:for/nested.carbon.test FAILED in 0.6s
//toolchain/parser/testdata:for/simple.carbon.test FAILED in 0.8s
//toolchain/parser/testdata:function/definition/with_params.carbon.test FAILED in 0.8s
//toolchain/parser/testdata:operators/fixity_in_call.carbon.test FAILED in 0.7s
//toolchain/parser/testdata:operators/fixity_in_var.carbon.test FAILED in 0.8s
```
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
The ParseTree comments say that preorder is "easier to visualize and read". The problem is, both the ParseTree and Semantics need to operate on the postorder traversal: the ParseTree during construction, and the Semantics during processing. As a consequence, understanding the postorder traversal is important, but it's also very hard to decipher when presented preorder. This PR provides a way to see the postorder, with helpful indents to show subtrees.
This retains the preorder printing as an option for people who prefer that. I'm pretty sure it'll be easier to debug tests if we can see the postorder, so I'm making that the default.
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
In summary - some of the changes here are focused on producing the same test results for SemanticsIR, but I think the next step will be to change the SemanticsIR structure to reduce how much is added to the traversal stack.
Switching semantics to a postorder traversal is intended to be more efficient. The traversal stack is to eliminate risk of recursion limits within the semantic analysis that could come from layered code structures. However, we need to start considering the implications for type-checking and what the ParseTree looks like, as well as copying of data here.
As we start thinking about type-checking in SemanticsIR, it's helpful for a function to know its own signature in order to perform lookup recursive calls. The challenge in the post-order walk without this change is it doesn't know it's in a function definition (or similar) until it reaches the FunctionDeclaration; this restructures so that either:
1. For a declaration, the signature is a child of FunctionDeclaration(";")
2. For a definition, the signature is a child of FunctionDefinitionStart("{") which pairs with FunctionDefinition("}"), replacing CodeBlock.
This similarly reorients CodeBlock to be CodeBlockStart("{") as the first child of CodeBlock("}"). I'm not doing that with ParameterList here just because it affects a bit more, and felt like it could be delayed.
Overall, my goal is making the postorder traversal more intuitive along scope boundaries. I think we may also not need subtree_size, so I'm avoiding use of that now.
Currently the SemanticsIRFactory implementation is less clean than I might like (there are a couple comments to this point), but I was starting to feel like a more complete rewrite would be appropriate rather than trying to clean it up further: in particular, I think the node structures are off, but changing them is significant and also changes test output; in turn it may also warrant more substantial ParseTree changes. If you prefer from a reviewer POV, I can do a more complete rewrite.
This switch is being done in order to make it easier to update tests when the parse tree structure changes. I've been spending a lot of time doing such updates as part of refactoring the parse tree, and I expect more, so that's really at the root of all the refactoring I've been doing to lit updates.
Jon Ross-Perkins
Richard Smith
