In #7378 we forbid writing `where` on the RHS of another `where`
expression. However it's still possible to inject a `where` expression
through eval, using an `alias` or an `eval fn`. We address this by
looking in the constant value of constraints of a `WhereExpr` (which
sees the outcome of eval) and searching for a nested `where` there. We
can determine a facet type was written with a nested `where` by seeing
that it has some non-extend constraint.
---------
Co-authored-by: David Blaikie <dblaikie@gmail.com>
This disallows building a facet type that contains another facet type
with non-extend constraints in it. Which in turn prevents the
possibility of introducing a different `.Self` into a facet type.
Eval can still insert a facet type with non-extend constraints, as we
only prevent it for `where` being written into the facet type. There is
a TODO in handle_where.cpp for this and some tests in
toolchain/check/testdata/facet/nested_facet_types_from_eval.carbon
Instead of requiring just one to have a designator, require each one.
You can't write `(type where A == B) & (type where C == .Self)` because
`A == B` has no designator. If the two facet types are combined into a
single `where` syntactically, their meaning does not change, and what we
allow should not change either. That is, `type where A == B and C ==
.Self` should be rejected since `A == B` does not contain a designator.
The design is also updated to make this clear.
If a facet type contains `.X impls Y` then later references to `.X`
should know that it impls `Y`. This is done through a stack on the
context like for rewrites, where impl lookup can find constraints from
the current `where` expression being checked.
Similarly, if a facet type contains `.X impls (Y where .Z = T)`, then
`.X.(Y.Z) = T` should be available to later constraints in the facet
type for early application of rewrite rules. We add these rewrites to
the rewrite stack when handling the `impls` constraint
This lets us stop eliding it in textual semir tests with dump ranges.
Previously it would always get elided, even though it was part of the
range being dumped, and was referred to by other instructions in the
dump range.
Since each `.Self` is unique (can change its type if not its value) in a
facet type, having each one distinct by location also aids
understanding.
A `where` expression nested inside a `T impls X` constraint makes
`.Self` ambiguous on the right-hand side of the `where` if `T` is
anything other than `.Self`. After the `where`, the value of a `.Self`
could be `T` or could be the value of `.Self` before the `impls`
constraint: the so-called top-level value of `.Self`.
Implicit use of `.Self` in designators is always allowed, and they are
bound (and replaced by a reference) to the inner-most possible value of
`.Self`. On the right-hand side of the nested `where` above, they have
the value `T as X`.
`.Self impls ...` is also always allowed, since it acts more as a
keyword here, and it always refers to the inner-most possible value of
`.Self`.
Any other explicit use of `.Self` is diagnosed when ambiguous, in any
kind of constraint. This is done in the handling of `WhereExpr` since it
has enough context to allow `.Self impls` (which is an explicit use)
while disallowing other explicit uses. And because it has non-canonical
instructions to work with, so it is able to diagnose errors with precise
locations.
Since `.Self` is no longer going to be marked with depth modifiers, the
eval of `WhereExpr` does not need an input facet value instruction
representing `.Self` to compare with, as they are now going to all be
equivalent. So revert it back to just looking for the `PeriodSelf` name
id, through a shared helper being introduced as `IsPeriodSelf`. And drop
the period self InstId from the `WhereExpr` instruction. This causes
most of the formatted SemIR changes.
Move helpers for working with and replacing `.Self` to their own file,
out of the `facet_type.h` header/cpp files. These are working with
`.Self` facet values more than facet types, though `.Self` is a name
that only exists inside the scope of a facet type.
This makes them part of the identified facet type, and we can see the
constraints as part of stringify and format output.
But this does not do enough to make them useful yet: Any `T impls X`
constraint must contain a reference to `.Self` somewhere. And `.Self`
references do not get substituted, so neither `T(.Self) impls X` and `T
impls X(.Self)` will match against an incoming facet value derived from
an `impl T(U) as X` or `impl T as X(U)`, since `U` and `.Self` are never
the same thing until `.Self` can be substituted.
Now that impl lookup runs into facet values containing `.Self` (a
symbolic binding), such as in `C(.Self)`, we were crashing assuming the
type of `.Self` is a FacetType, but it can be `type` in the case of
`type where C(.Self) impls...`. Instead, use an empty facet type for the
type of `.Self` so it is always a facet. This assists with substituting
other facets into it, without having to insert an extra FacetAccessType.
`MakePeriodSelfFacetValue()` now enforces this requirement.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Implementation of unused pattern bindings #2022, continued.
Whereas previous PR #6460 took care of parsing, and PR #6479 prepared
the stage by using _ in some test cases, this PR has the the actual
implementation, using a simple dataflow analysis.
---------
Co-authored-by: Burak Emir <bqe@google.com>
Co-authored-by: jonmeow <jperkins@google.com>
We add a virtual node (`CompileTimeBindingPatternStart`) as the first
child of `CompileTimeBindingPattern` which holds the identifier
underneath it, so that it is checked just before the type expression of
the `CompileTimeBindingPattern`. When we reach this virtual node during
check, we add `.Self` as a name in the current scope, and when we reach
`CompileTimeBindingPattern` we remove it from scope, which ensures it's
present during only the checking of the type expression for the compile
time pattern.
At the moment the `.Self` has a different type (it's a `TypeType`) than
other `.Self` in the facet type (which are a single `FacetType`), but
the intention is to immediately substitute it out of the facet type
entirely, replacing it with a reference to the compile time binding (a
`BindSymbolicName`) itself. A TODO has been added for this.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This makes all `.Self` references in a facet type canonically the same
(which will remain true iff they refer to the same `Self` type in the
future), removing the need to do more complex comparisons between them
using the EntityName, interface, and index. This allows the comparison
of types containing `.Self` references to be done correctly regardless
of where the `.Self` appears, as such type expressions will all be
canonically equal if they otherwise equal now, regardless of whether
they are written in the context where `.Self` could have seen different
`Self` facet types.
In order to retain access to constraints on a base `.Self` facet type,
in the case of applying `where` to an existing facet type, we:
- Give the base facet type as a `RequirementBaseFacetType` constraint so
that eval of `WhereExpr` can find and copy all the constraints off of
it.
- Introduce eager/early rewrite constraint resolution, which allows a
constraint to eagerly resolve access to earlier rewrite constraints
(`where .A = () and .B = .A` is eagerly transformed into `where .A = ()
and .B = ()`) before the full constraint resolution step. This allows
use of rewrite constraints in larger type expressions, such as `where .A
= () and .B = C(.A)` and `C` will know that the argument is `()`.
This will allow reusing existing entity names when there are nested
.Self references in a facet type. They are canonical as the contents of
a .Self reference are all canonical.
Right now, return_scope_stack is being used to determine whether logic
is in a function scope. However, we need to handle nested entities
inside function scopes. For example where this crashes right now:
```
base class C(B:! bool) {}
fn F() {
class B {
extend base: C(true or false);
}
}
```
This is doing a few things to make this kind of code not crash:
- Split `scope_stack().Push` into `PushForDeclName`, `PushForEntity`,
`PushForExpr`, and `PushForFunction` so that better decisions can be
made about behaviors.
- Hide `return_scope_stack` in the API, instead using interfaces to get
at the underlying data.
- Also using `PushForFunction` to update it similar to the other stacks
that `ScopeStack` manages.
- Add `IsInFunctionScope` as the best way to determine presence in
function scope.
- Remove `PeekIsLexicalScope` since destruction really wants function
scope information anyways.
- Clean up `destroy_id_stack` handling to be for function scopes rather
than lexical scopes.
- Return after related `context.TODO`s in a couple more spots, so that
code doesn't proceed to add control flow in spite of the lack of
support.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
We frequently want to operate on singletons. Per discussion, drop
`Singleton` to make the code shorter.
This started off as wanting to write `inst_id.is_error()`, but the
dependency relationship between ids.h and singleton_insts.h would
require some kind of delayed evaluation to allow the implementation to
remain in headers (which I suspect is helpful to have for inlining). I
could have added something like `IsErrorInst`, forward declared in ids.h
and defined in singleton_insts.h (which would always be included by
typed_insts.h), but the template approach felt like a decent balance
between (a) removing the boilerplate `::SingletonInstId`, (b)
understandability, (c) still visually mirroring if we immediately return
a singleton, and (d) flexibility for more than just `ErrorInst`. But TBH
I'd probably still have written `is_error()` if it didn't require
addressing the cross-header cycle.
Then I tried `SemIR::InstId::Is<SemIR::ErrorInst>`, which generally
worked with types but generated the complaint that it didn't shorten
*all* singleton uses. So pulling back on `::Is`, and instead just
dropping `Singleton`.
TypeInstId is an InstId whose constant value has a type of TypeType.
This includes:
- Type value instructions, the `ClassType` or `IntLiteralType`
instructions.
- Constraint value instructions, which are the `FacetType` and
`TypeType` instructions, each of which also have type TypeType.
TypeInstId encodes in the type system that it is safe to convert the
instruction's value to a TypeId, and CHECKs at construction that this
invariant is maintained.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
* Add `RequireCompleteFacetType` and `ResolveFacetTypeImplWitness` to
`check::Context`. Goal was to move code from `impl.cpp` (mostly) without
functional changes.
* Complete type information is cached with the facet type, and is stored
in a `complete_facet_types()` table.
* Main functional change is to diagnose attempts to use a rewrite
constraint on an associated function. Some existing diagnostics have
been updated.
* Remove `check::Context::RequireDefinedType`:
* For class types, use `RequireCompleteType`
* For facet types, use `RequireCompleteFacetType`
* Introduce a `SemIR::SpecificInterface` to hold an interface and
specific id pair.
* Keep the specific interface ids in the impl object.
* Avoid some extra copies in `Dump` functions.
* Future work missing from this PR:
* Resolving for member access or actions that require impl lookup.
* Resolving rewrites constraints that refer to non-concrete values.
* Any support for adding implied constraints that result from a `where`
clause (though TODOs have been added).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
This in particular uses free functions because it's likely to end up
more consistent with types (versus a wrapper object for InstStore).
Note, this is unlikely to have a performance impact, but if it does, we
can look into related approaches (and we've already discussed using
LTO).
Renames `PendingBlock::AddInst` to `PendingBlock::Add` because
`MakeElementAccessInst` expects the matching name to exist.
This creates a new check/type.h for most logic, and also moves some
functions to TypeStore in sem_ir/type.h. My approach for TypeStore is to
focus on moving the read-only functions there.
Change parse tree from `template (T:! type)` to `(template T):! type`,
so that we have information about whether a binding is a template
binding available when forming the representation of the binding
pattern. This incidentally fixes a bug that we would accept `template
addr A:! B` instead of the intended `addr template A:! B`.
Track whether a symbolic binding is a template binding on the
`EntityName` object. I'm borrowing a bit from the `CompileTimeBindIndex`
for this in order to avoid making `EntityName`s larger. Longer-term, we
should think about using a different representation for symbolic
bindings, to avoid including these fields in all `EntityName`s, but
that's out of scope for this change.
So far, template bindings are treated as having the same phase as
checked bindings, but that will change in a future PR.
Add a full entity representation for associated constants, and build a
`Generic` object for them. This `Generic` is parameterized by the
enclosing `Self` type, allowing the use of `Self` within the type of the
associated constant to be supported.
When performing impl lookup for an associated constant, produce the type
with the provided self type substituted for its `Self` along with any
generic parameters of the interface.
Split the handling of associated constant declarations into two parts,
corresponding to the code before the `=`, and the code between the `=`
and `;` (if any). The former goes into the generic declaration region;
the latter into the generic definition region. This prepares us to
handle the default value for an associated constant, but for now we're
just storing the information and not actually using it.
Remove the entity type field from `assoc_entity_type`, because it's
almost unused and is an attractive nuisance -- it must necessarily be a
type in the generic scope of the associated constant rather than in the
scope of the instruction (because there is no `Self` anywhere else),
which means that it's hard to substitute into or derive meaning from.
See `toolchain/check/testdata/impl/assoc_const_self.carbon` for tests of
the new functionality; these used to cause the toolchain to crash.
This is a followup from #4834, I searched for "invalid" uses in our
codebase. This is mostly changing comments, and a couple debug
functions, but shouldn't affect testable behavior.
Note a couple things I'll highlight as not changing (but could) are:
- `ReturnTypeInfo::is_valid`
- `"invalid"` uses in the formatter
- `AddInvalid` for `!has_value` in `inst_fingerprinter` (because the
cases it's called sound invalid-ish)
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
`ids.h` and `ids.cpp` are the manual edits, everything else is
search-and-replace.
The full list of things moved is:
- `TypeId::TypeType`
- `TypeId::AutoType`
- `TypeId::Error`
- `ConstantId::Error`
This is to unblock removing `InstId::Builtin*`.
* Rewrite constraints are stored in a facet type, substituted, imported,
and formatted.
* We now distinguish `.Self` from other symbolic bindings in two ways:
* `.Self` itself now has an invalid compile time binding index (since it
doesn't bind to any of the generic parameters). As a result, we no
longer need to create a generic region in `handle_where.cpp`.
* There is a new phase tracking values that are only symbolic because
they transitively depend on `.Self`. This allows us to give the result
of a `where` expression template phase as long as it doesn't use any
symbolic constants other than `.Self` or other designators.
* `AddConstant` has been removed from `check/context` since it was only
used from `eval`. This meant less plumbing of the phase change.
* Evaluation of `BindSymbolicName` now also performs substitution into
its type.
* Include a bit more information in some diagnostics.
* `StringifyTypeExpr` outputs rewrites, which required adding support
for associated entities as well.
* Associated entities now have an entity name set when importing.
* Adds tests for some interesting cases with rewrites and uses of
`.Self` mixed with other symbolic constants.
Still to do:
* There is no validation that any particular type satisfies rewrite
constraints.
* Access to members of a facet type do not see the rewritten values.
* Impls don't recognize whether associated constants have rewrites
setting their values.
* No support for resolving facet types.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is for more clearly distinct names, and to make it a clearer
transition from `BuiltinInst` for name conflicts. `FloatType` is also an
instruction, and we have `Carbon::Error` (common/error.h). This avoids
affecting tests, although the name is embedded in the builtin test.
In `LegacyFloatType`, `Legacy` because I was having trouble coming up
with a more appropriate name. I'm not clear this is a `FloatLiteralType`
at present, it needs some work to mirror `IntLiteralType`.
In `ErrorInst`, the suffix `Inst` was discussed as good and similar to
`BuiltinInst` (although I'm trying to get rid of that).
This does a few things:
* Replaces the single `TypeId` in the `FacetTypeInfo` struct with a
vector of `InterfaceId`, `SpecificId` pairs (sorted in id order)
representing the set of interface requirements of the facet type. This
will later be used to support facet types with multiple interface
requirements (as in `I & J` or `I where .Self impls J`).
* Replace `InterfaceType` instructions (used as the type of an
`InterfaceDecl` instruction) with `FacetType` instructions (introduced
in #4460) with a (newly introduced) `FacetTypeFromInterface()` function.
* Replace code that consumed `InterfaceType` values with code that
consumed `FaceType` values. I've generally left the assumption in the
code that it is dealing with a single interface, using the (newly
introduced) `FacetTypeInfo::TryAsSingleInterface`, and producing an
error otherwise. There isn't yet support for the `&` operator or `where
.Self impls`, so this is generally a good assumption for now, except you
can get a facet type with no associated interfaces from a `type
where`... expression. In some cases, the facet type value is pulled from
the evaluation of an `InterfaceDecl` instruction, where the single
interface assumption will hold permanently.
* Some related cleans up: nicer stringification and formatting of facet
types, suppression of some errors when there already was an error.
There is still a lot left to do, including:
* Type `type` should be a facet type with a reserved id, replacing the
built-in instruction.
* Code using `TryAsSingleInterface` should generally be upgraded to
handle more than (or less than) one interface. Name lookup should be
particularly exciting.
* Operator `&` should be defined on facet types, unioning their
interface and other requirements.
* Requirements from a `where` clause don't do anything yet.
* Impls and impl lookup need to resolve facet types, and do things like
determine if all the associated constants are given values.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Geoff Romer <gromer@google.com>
Still to do:
* Represent facet type values in a canonical form
* Produce & consume facet type values instead of interface values
* `type` should be associated with a canonical facet type value
* Support `&` on facet type values
* Type check and enforce requirements in facet types
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
With this, we now check:
* The left argument to `where` is a facet type
* The right argument of a rewrite (`=`) requirement converts to the type
of the left argument.
* The left argument of an `impls` requirement is a type and the right
argument is a facet type.
No checking is done for `==` constraints yet.
In addition, make the "is facet type" query into its own function and
fix some comments noticed as part of this change.
This change reveals that accessing the members of a facet, like `.Self`,
isn't doing the right thing, and will have to be fixed in a follow-on
PR. Some tests have been adjusted or disabled as a result.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
The check stage now produces SemIR instructions to represent a `where`
clause. It still does not check types.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Right now, there is no checking of `where` requirements. The result of a
where expression is just the type on the left-hand side. It does now
introduce `.Self` so that it is available in expressions on the
right-hand side, in addition to designators corresponding to the members
of type on the left-hand side. Note, though, that diagnostics could
still be improved significantly.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Includes support for the `impls`, `=`, and `==` requirement operators to
the right of a `where`, but `and` to allow multiple requirements is
still a TODO.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
These appear in `where` clauses, as in:
```
U:! InterfaceB where .C = Vector(.D)
V:! type where Vector(.Self) impls Sortable
```
`.Self` can additionally appear in type expressions in a binding pattern
such as `T:! InterfaceA(.Self)`.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Dana JansensandDavid Blaikie
