This converts `StructTypeField` from an instruction to a dedicated type,
with its own store. This had originated from discussing how
`.GetAs<SemIR::StructTypeField>` was more prevalent than for other
instructions, but is probably more interesting for the storage savings
(16 bytes StructTypeField + 4 byte LocId + 4 byte InstId -> 8 byte
StructTypeField).
Due to the different structure, these now have their own stack during
construction, reducing (but not eliminating) `args_type_info_stack_`
use-cases.
The test changes of different InstIds is expected because structs and
classes generate fewer instructions now. Other than that, results should
remain the same.
I'm generally trying to avoid unrelated cleanup here due to the PR size,
though I did scrutinize the `VerifyOnFinish` calls, adding one and
commenting others (putting them in member order because that's how I was
checking what was verified and what wasn't).
Split StructComma into StructLiteralComma and StructTypeLiteralComma in
order to easily differentiate handling (remains the same in this PR).
Add "Literal" to StructField and StructTypeField because it feels
inconsistent versus the other non-shared things. StructFieldDesignator
remains shared between value literals and type literals.
Note I probably would've made StructFieldDesignator non-shared too, but
that'd require either a lookahead of 2 (to see the separator`) or a
writeback after parsing the separator, neither of which felt especially
crucial for this, when what I'm really trying to do is split type
literal handling a little further.
We can't completely remove std::string from diagnostics because it's
probably better to provide a string than something like a
StringLiteralValueId or NameId (because those may be opaque for someone
trying to present the diagnostic). So this change is just playing
whackamole on another couple things that could easily use the new format
providers.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This switches `DCHECK` and `FATAL` as well.
The goal is to reduce the code size impact of these assertions so that
we can keep more of them enabled. Currently, the largest cost I see from
`CHECK` is not the actual check or the cold code itself, but actually
the failure to inline trivial functions due to the presence of the cold
code. This means that our goal isn't to reduce apparent code size in the
final binary but the LLVM IR cost assessed for these routines in the
inliner, which closely correlates with code size but is a bit different.
As discussed in #4283, experimentation shows that a single function call
with a minimal number of arguments is the lowest cost model for these.
This is easily achieved with a format-string API that internally uses
`llvm::formatv`. This PR is essentially the `CHECK` version of #4283.
However, the check macros are substantially harder to make work with
both format strings and streaming because they also take a condition.
Also, unexpectedly, I was very successful at devising a regular
expression based automated rewrite from the streaming to the format
string form with only low 10s of manual fixes. This includes compacting
strings broken up across lines, etc. Given how well that went, I've
prepared this PR which just directly switches to the format string API
and migrate everything to use it.
One nice side-effect is that the format string approach ends up greatly
simplifying the implementation here as well.
This is ... *shockingly* effective. Parsing speeds up by more than 3%
with just this change. And checking speeds up by **8%** with this change
alone:
```
BM_CompileAPIFileDenseDecls<Phase::Parse>/256 86.3µs ± 1% 82.9µs ± 1% -3.94% (p=0.000 n=17+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/1024 431µs ± 1% 415µs ± 1% -3.76% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/4096 1.77ms ± 1% 1.71ms ± 1% -3.18% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/16384 7.44ms ± 1% 7.17ms ± 2% -3.56% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/65536 30.7ms ± 1% 29.7ms ± 1% -3.15% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/262144 131ms ± 1% 127ms ± 1% -2.81% (p=0.000 n=18+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/256 878µs ± 2% 800µs ± 1% -8.91% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/1024 1.88ms ± 2% 1.72ms ± 1% -8.56% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/4096 5.78ms ± 2% 5.28ms ± 1% -8.70% (p=0.000 n=20+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/16384 21.9ms ± 1% 20.1ms ± 1% -8.02% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/65536 90.4ms ± 2% 83.1ms ± 1% -8.04% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/262144 381ms ± 2% 352ms ± 1% -7.79% (p=0.000 n=19+19)
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Support for types (particularly classes) is left as a TODO.
There's also an issue I'm observing with a "define in impl" test, but
this is probably an issue with resolving the prior declaration which is
imported indirectly. The PR was already feeling big, so I'm choosing to
cut here.
Note, this does not implement the rule "The owning library's API file
must import the `extern` declaration, and must also contain a
declaration."
This is for consistency with #4120. Similar to that, we can use
overloads on the typed NodeId rather than individually named handlers.
There isn't the same caller benefit here though, since the calls from
check.cpp are already boilerplate.
This works to leverage the capabilities of the hashtable as much as
possible, for example using the key context in the value stores.
However, there may still be opportunities to refactor more deeply and
use the functionality even better. Hopefully this is at least
a reasonable start and gets us a clean baseline.
On an Arm M1, this is a 15% improvement on my large lexing stress test,
but ends up a wash on my x86-64 server. This is a smaller benefit than
I expected, and it's because we're using a set-of-IDs and looking up
values with a key context for things like identifiers. This pattern has
a surprising tradeoff. The new hashtable uses significantly less memory,
a 10% peak RSS reduction just from the hashtable change. But indirecting
through the vector of values makes growing the hashtable dramatically
less cache-friendly: it causes growth to randomly access every key when
rehashing. On x86, everything gained by the faster hashtable is lost in
even slower growth. And even on Arm, this eats into the benefits.
But I have a plan to tweak how identifiers specifically work to avoid
most of the growth, and so I suspect this is the right tradeoff on the
whole. It gives us significant working set size reduction and we can
likely avoid the regressed operation (growth with rehash) in most cases
by clever reserving and if necessary by adding a hash caching layer to
the table infrastructure.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Most of these are places where we failed to include a header file and
simply never got an error about this. The fix is to include the header
file.
Most other cases are functions that should have been marked `static` but
were not. Finding all of these was a main motivation for me enabling the
warning despite how much work it is.
One complicating factor was that we weren't including the `handle.h` for
all the state-based handler functions. While this isn't a tiny amount of
code, it is just declarations and doesn't add any extra dependencies. It
also lets us have the checking for which functions need to be `static`
and which don't. For the `parse` library I had to add the `handle.h`
header as well, I tried to match the design of it in `check`.
I have also had to work around a bug in the warning, but given the value
it seems to be providing, that seems reasonable. I've filed the bug
upstream: https://github.com/llvm/llvm-project/issues/94138
I also had to use some hacks to work around limitations of Bazel rules
that wrap `cc_library` rules and don't expose `copts`. I filed a bug for
`cc_proto_library` specifically:
~https://github.com/bazelbuild/bazel/issues/22610~https://github.com/bazelbuild/bazel/issues/4446
Trying to conform with #4009. Changes SemIR::LocIdAndInst construction
to root out struct init cases with AddInst and related functions. I'm
using templating of AddInst functions in order to avoid `AddInst(loc_id,
InstName{...})` and instead have `AddInst<InstName>(loc_id, {...})` with
I think similar readability results. There are a couple cases where inst
construction is templated and so designated initializers couldn't be
used, so this may be better for those in particular due to the extra
type enforcement.
This probably doesn't clean up every last case, but I was trying to get
the bulk at once without bleeding over into less related changes.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is achieving a similar goal as #3849, using placeholders instead of
an ambiguous start node to clarify structure and incrementally simplify
checking. The benefit isn't quite as big here because both paths are
structs, and so checking is more consistent than paren exprs versus
tuples. But I think this removes the only other multi-purpose parse
node.
This uses StructLiteral/StructTypeLiteral naming, reflecting equivalent
SemIR naming. Note, I would lean towards renaming StructLiteral to
StructValueLiteral, but I think consistency in naming takes precedence.
Any renames of StructLiteral might be better in a separate PR.
StructFieldType/StructFieldValue -> StructTypeField/StructField is
trying to making the reading more consistent with
StructTypeLiteral/StructLiteral. SemIR has StructTypeField but not a
value equivalent.
This was previously discussed at
https://discord.com/channels/655572317891461132/655578254970716160/1209975051588210729.
I'm initiating this mainly because we typically use "id" suffixes to
indicate an `IdBase` being passed around and the non-id suffix of
`parse_node` suggests at it carrying more data than it actually does.
There used to be more reason for avoiding `node_id` because
`SemIR::InstId` used to be named `NodeId`, but that's no longer
necessary. As a consequence, I'd like to rename `parse_node` to more
precisely reflect its type.
In full, this is doing:
```
parse_node_kind -> node_kind
parse_node -> node_id
ParseNodeCategory -> NodeCategory
ParseNodeKind -> NodeKind
ParseNode -> NodeId
```
This is primarily in check and sem_ir, but with some `parse_node_kind`
references in parse too.
Pluralization is consistent with name forms on both sides, so that
wasn't part of my replacements.
Remove the type canonicalization mechanism and instead rely on constant
canonicalization to deduplicate types.
Rename the `Canonicalize*Type` functions to reflect that they're no
longer performing canonicalization. Switch code that creates types due
to semantic checking, rather than due to source syntax, to directly
create type constants through evaluation rather than creating an
instruction and evaluating it to produce a separate constant
representation.
The mapping from `const (const T)` that was previously performed by type
canonicalization is now implemented in expression evaluation instead.
The value `<error>` is now treated as a constant value, with a special
property that an instruction involving `<error>` that could possibly be
constant evaluates to `<error>`. This helps avoid producing follow-on
errors when an error occurs as a subexpression of an expression, such as
a type, that is intended to be constant.
Instructions created by splices during conversion are now evaluated, as
are instructions created in cases where we first create a placeholder
instruction and later replace it by a different instruction.
This also removes the ability to set a parse node and instruction
independently after creating an `InstId`, which could lead to them
accidentally not matching.
The parse nodes are still tracked as part of the same value store
interface in order to ensure parity, but they're split out from Inst
itself in order to reduce the size of Inst -- the expectation is that
they don't need to be passed around quite as much.
This change doesn't actually reduce the passing very much, although
there are hints of it: AddInstAndPush doesn't typically need a separate
parse node from the one on the Inst itself, for example. In a couple
spots I changed code to rely a little more on the InstId until the
ParseNode is needed, but it's very low hanging fruit where done. I think
convert could do more to not eagerly fetch the parse node before its
use, but more cleanup felt it would be easier to handle separately. I'm
currently viewing this as making such cleanup _possible_ rather than
executing on it up-front.
But also, I want to make sure there's a consensus to head in this
direction before pulling the trigger. We speculated that this would
result in the parse node being passed around less, and I do think that's
the case, although it's a bit fuzzy in the change.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Goal is to increase type safety, though more work needs to be done (see
added TODOs).
Note that, after this change, check handlers corresponding to deleted
parse node kinds will no longer compile.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
StructFieldUnknown was used previously for invalid parses. But we have
added other, more common ways of talking about those; so this is
removing the special-case.
This gets to a lifetime subtlety, particularly with things like the
sorting diagnostic consumer that delay output. In order to reduce the
chance of accidental references, disallow StringRef in the diagnostics.
For example:
```
./toolchain/diagnostics/diagnostic_emitter.h:162:5: error: static_assert failed due to requirement '!std::is_same_v<llvm::StringRef, llvm::StringRef>' "Use std::string or llvm::StringLiteral for diagnostic lifetimes."
static_assert(
^
toolchain/check/convert.cpp:477:11: note: in instantiation of member function 'Carbon::Internal::DiagnosticBase<std::string, std::string, llvm::StringRef>::DiagnosticBase' requested here
CARBON_DIAGNOSTIC(StructInitMissingFieldInConversion, Error,
^
./toolchain/diagnostics/diagnostic_emitter.h:47:7: note: expanded from macro 'CARBON_DIAGNOSTIC'
::Carbon::Internal::DiagnosticBase<__VA_ARGS__>( \
^
```
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
A struct with the same member name twice can cause a `CARBON_CHECK`
failure later when it is used (problem found by fuzzing).
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
Following up on discussion yesterday regarding this split.
Note, I'm expecting #3341 to do IdentifierId -> NameId in SemIR. It
might be worth adding NameId creation directly to StringStore if you're
content with this setup though.
1. In general, `semantics_ir` -> `sem_ir`, to match the directory name.
2. For the list of `ValueStore`-related accessors on `SemIR::File`, add
them to `check`'s `Context` object, shortening access.
Finishing what #3316 started, add more bespoke ValueStore-like
structures to File. With this, the things which previously had somewhat
boilerplate Add/Get functions are now all on side classes, giving a
uniform style of API for calling.
Note, I was on the fence about making things public on ValueStore. If
it's preferred that I make some things there protected I certainly can,
there's just a trade-off that may mean more distinct child/wrapper
types.
Split `node.h` into separate files for ID types (`id.h`) and for typed
nodes (`typed_nodes.h`). The per-node-kind data is now specified as part
of declaring the typed nodes, and is removed from the node kinds
x-macros, which now simply enumerate the node kinds.
This updates lexing to use the data. I'll do checking separately, just
to split changes.
Note the ValueStore structure is also set up such that SemIR::File can
use it for other fields.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Replace `SemIR::Node::GetAsFoo` and `SemIR::Node::Foo::Make` with
`SemIR::Foo` class that represents a particular kind of node, with named
fields.
Rename `SemIR::IntegerLiteral` and `SemIR::RealLiteral` to
`IntegerValue` / `RealValue` to better reflect their purpose and avoid a
name collision with the corresponding `SemIR` node kinds.
Remove `NodeKind::Invalid` and the `SemIR::Node` default constructor
entirely, as they were not used for anything.
Combine the initialization, implicit conversion, and value category
conversion functions into a single function.
This substantially reduces the duplication between these steps, and
ensures that we support the same set of conversions in all these
contexts. This also fixes some issues where we would not use the proper
value representation for tuples and structs after performing implicit
conversions.
The speculative insertion of StubReferences after elements in an
argument list turned out to not be necessary, because we decided we want
to insert per-argument initialization steps after all arguments are
evaluated, rather than interleaving them. The StubReferences we insert
are causing some minor code complexity, so remove them.
We still create StubReferences when performing patch-ups of
already-emitted code, but we no longer ever need to look through them
when determining whether an initializer was a literal or when evaluating
a type expression.
This implements initializing expression semantics for structs and
tuples, following #2006 and discussions since.
Tuple and (and analogously, struct) literals are treated as having a
mixed expression category that is later resolved based on how the
literal is used, as either a tuple initializer or a tuple value, at
which point we create a `TupleInit` or `TupleValue` that represents the
formation of the tuple initializer or tuple value from the tuple
literal.
There's quite a lot of TODOs here, and the SemIR representation is still
not quite right, but this seems like a good place to checkpoint some
incremental progress.
- `Peek()` no longer returns a useful value, because we often don't
allocate a `NodeBlockId` until we finish building the block. Remove it
and update both its callers.
- Rename `PeekForAdd()` to `PeekOrAdd()` since it's no longer used to
get a block ID to add elements into.
- `PushForAdd()` was unused. Remove it.
- Add `NodeBlockStack::AddNode` to combine the operations of adding a
node and inserting it into a block.
This better reflects the purpose of these semantics nodes, and prepares
for adding TupleValue and TupleInit nodes to represent forming values
and initializers from literals.
Continuing along with #3070. Note this is just a file rename, with BUILD
edits; every file previously in semantics/ should show as moved (except
maybe BUILDs, which split).
Jon Ross-Perkins
Richard Smith
josh11b