This change partially implements [PR #7362], which revises how objects
are destroyed. It is a partial implementation for two reasons:
1. This change moves `Destroy.Op`'s current behaviour into
`Destroy.SubobjectDestroy`, but it doesn't add support for objects with
non-trivial destruction.
2. `Destroy.SubobjectDestroy` is a workaround for `require impls
SubobjectDestroy`. We aren't able to use the latter until the dependents
add their requirements' implementations to their own witness tables.
[PR #7362]: https://github.com/carbon-language/carbon-lang/pulls/7362
The type `type` is now a `FacetType` inst with no constraints. This
brings the model implemented in the toolchain into better alignment with
the language design. The `SemIR::TypeType` struct remains as a scope for
holding the `TypeInstId`, `ConstantId`, and `TypeId` constants, but is
not an `InstKind` anymore.
The `TypeType` inst looks a lot like singletons, but there are many
`FacetType` insts so it doesn't quite fit that model. So we put it
alongside singletons with a fixed inst id but refer to it as a more
general "builtin" inst that is not a singleton.
`Namespace::PackageInstId` is similar, and we group it with `TypeType`
conceptually as another builtin instruction with a fixed id.
No conversion is needed anymore to use a `type` as a facet, since types
also have a `FacetType` type. This simplifies and removes a number of
helpers and branches throughout the code.
The `TypeType` inst is now part of the constant store, so we end up
printing it in the constants block in every test. But it's also named
`type` rather than `%type` to preserve the majority of existing
formatting behaviour, though this does look different from other
constants.
Assisted-by: Opus 5 was used to generate a first draft and validate the
refactoring. Though nearly everything non-trivial the tool wrote has
been modified or rewritten.
This action was created to wrap any `MetaInstId` operand of an action
instruction. This served two purposes:
1) It had a special hook in `OperandIsDependent` to allow it to be
performed while it had a dependent operand (the reference to the
instruction in the generic).
2) It created a `specific_inst` so that the downstream action saw an
instruction in the specific instead of one in the generic.
These are both replaced: the special case in `OperandIsDependent` for
`RefineInstAction` is replaced by a special case for `MetaInstId`s in
general, and the `SpecificInst` is now created as part of performing the
downstream action, rather than as a separate step carried out
beforehand.
This simplifies the produced SemIR and reduces the number of splices
significantly. It also prepares us to handle actions like
initialization, where we don't actually want to create `SpecificInst`s
immediately in the location where the action is performed, because they
actually belong somewhere else in the IR.
Assisted-by: Claude Opus 5 and Gemini via Antigravity
Use a single `SemIR::Function` per `Core` interface method, whether it's
generated locally or imported. This prevents generating duplicate
functions, which lead to different types when the witness appears in a
`FacetValue` as part of a specific for a class.
We use a `CanonicalValueStore` of `GeneratedFunction` objects that allow
finding an existing FunctionId for a `Generated` special function before
(re-)generating it. Mangling for `Generated` functions is also moved to
use the values from the `GeneratedFunction`'s canonicalization key, so
that we have a consistent source of truth for the unique ID of a
`Generated` function across all files.
New tests are in
`toolchain/check/testdata/impl/custom_witness/destroy.carbon`.
Add basic support for lowering templates: we can now lower `SpliceInst`
in the case where the generic and specific are from the same file (and
we don't support importing templates from other files yet in general).
In order for this to work, lowering needs to be able to query the
expression category, and to handle instructions that appear to be
(template) constants in the generic but turn out to be non-constant in
the specific, so support for that is added.
Switch `type_of_inst` from being added as an action inst to being added
as a normal inst, since it's not an action and the old approach led to a
crash in lowering.
Replace `refine_type_action` with `refine_inst_action`, and generate a
`specific_inst` instead of an `as_compatible` to represent the specific
version of an instruction that's used as an input to a template action.
This gives us a place to handle other properties of the instruction that
might vary from generic to specific beyond its type, such as its
constant value and its expression category.
For now, we provide a non-template-dependent constant value to the
`specific_inst` in addition to the non-template-dependent type we have
traditionally provided. This doesn't seem to matter for any current
actions, but sets us up to better handle future actions. The
`specific_inst` representation also allows downstream consumers of the
instruction to track which specific they should be requesting
information from. Providing a correct expression category for
`specific_inst` will be handled in a future PR.
`GetCallee` is sometimes called on a spliced instruction, and is
checking its exact inst operand to see if it's a `BoundMethod`. This
fails if the `BoundMethod` is wrapped in another instruction, such as a
splice. Normally our approach for such a situation would be to
constant-evaluate the operand, but that doesn't work here because the
`BoundMethod` will be non-constant if its bound `self` is. So instead we
now step through splice instructions manually when looking for the
`BoundMethod`.
Calls with template callee or args can now be deferred via an
InstAction. This allows code like this to check:
```carbon
import Cpp inline '''
template<typename T>
struct C {};
''';
fn F(generic T: type) {
let unused c: Cpp.C(T) = Cpp.C(T).C();
}
```
Treat `InstConstantKind::InstAction` the same as
`InstConstantKind::ConstInstAction`. Drop `ConstInstAction`, since the
two now behave the same.
Fix eval for specifics in a couple places to handle `InstId::None`.
Generalize ConvertToValue template action to handle other kinds of
conversion target that don't perform initialization. Initializing
conversions will need more work since they also need to use a splice to
form the storage block.
Implementing interface modifiers causes an infinite loop when generating
fingerprints because the witness value generates a fingerprint that's
dependent on something dependent on the witness value. We've debugged
this to the witness table's `elements_id` field.
This hack is a workaround for creating a new block type whose value is
not codependent with its identity.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
During impl lookup, for each (generic) impl candidate, we form a
specific for that impl by deducing its generic arguments. Then we
compare the query interface against the impl's specific interface. That
comparison needs the deduced arguments applied to the impl's specific
interface. Previously we were doing this by getting the impl's
constraint facet type with the impl's specific applied (via
`GetConstantValueInSpecific()`) and then identifying that facet type
with the impl's deduced self.
Identify is a fairly expensive operation. It runs subst, trying to
replace `.Self` references. It walks named constraints. It collects
require declarations. We're looking at making it do _more_ in the future
too, including rewrite constraint resolution and collecting rewrite and
same-type constraints. For this reason we have a cache to make it cheap
on the second run, but it's still a very heavyweight operation to
involve in impl lookup, when all we want is to apply the impl's specific
to its target interface.
We almost have all the information we need to avoid the identification
step. We have the impl's specific after deduction. And we have the
SpecificInterface that the impl is targeting in the `Impl` struct. When
we form the specific for the impl itself, we resolve the declaration
block and form new constant values for all instructions in there, but
that does not cover the SpecificInterface that we're storing in the
`Impl` struct. So we add a new instruction to the impl's eval block,
which will be symbolic when the impl is generic and the target interface
depends on a generic parameter. And we store the `InstId` in the `Impl`
struct. This allows us to gets its constant value later with the impl's
specific applied. From that constant value we can then pull out the
SpecificInterface that the impl is targeting.
Point symbolic witnesses into `.Self` written inside an impl decl at the
impl that is being declared. This is tricky because the impl does not
yet exist. So we use a new instruction `ImplSelfWitness` which _will_ be
replaced by the `ImplWitness` once it becomes available. The
`ImplSelfWitness` acts like a symbolic witness, except it does not
perform lookup, since we know which impl we will get a witness from.
This prevents us from finding other impls when performing lookups into
`.Self` in an impl decl, which produces incorrect/incoherent results.
Implement the toolchain side of proposal #7254, removing the `:!`
binding
syntax for generic and template parameters in favor of the keywords
`generic`,
`template`, and `runtime` plus contextual defaults for phase.
For valid programs this is semantics-preserving: each binding resolves
to the
same phase, and produces the same SemIR, as it did under `:!`/`:`. The
parser
derives a binding's phase from its syntactic context plus any explicit
phase
keyword; new diagnostics and error recovery for misused keywords are
described
below.
Implementation details for each component:
- Lexer: remove the `:!` (`ColonExclaim`) token, move its virtual
parse-node
budget onto `:`, and add the `generic` and `runtime` keywords.
- Parser: thread a `BindingContext` (`ExplicitParam`, `DeducedParam`, or
`CompileTimeEntityParam`) from declaration introducers down through
parameter
lists to each binding pattern, using a one-token lookahead to
distinguish a
name-qualifier parameter list from a declaration's own final list.
Parameters
of a compile-time entity (`class`, `interface`, `constraint`, `choice`,
`alias`, `export`, `namespace`) and deduced `[]` parameters default to
checked
generic; explicit function parameters and local bindings default to
runtime.
`HandleBindingPattern` resolves the phase from that context plus the
keyword: a
`generic` keyword needs no node of its own (the phase is carried by the
binding's node kind), while a `runtime` keyword is preserved as a
`RuntimeBindingName` node so `check` can name it in a diagnostic. A
phase
keyword that is merely redundant with the contextual default is
diagnosed
here, without invalidating the parse tree.
- Check: a phase keyword that is invalid for its context (for example
`runtime`
on a checked-generic parameter) is diagnosed here, and recovers by
building an
error binding that still introduces the name so that later uses of it do
not
produce cascading errors.
The removed `:!` syntax is now rejected as an ordinary parse error.
The `form`/`:?`/`->?` ("extended types") portion of proposal #7254 is
left for a
separate change.
Assisted-by: Claude Code
In #7436 we stopped substituting `.Self` when collecting witnesses out
of a facet type. While this was correct, it did not capture all the
cases that need to avoid substituting `.Self`. And it poisoned the
`IdentifiedFacetType` cache by not replacing `.Self` but storing the
result in the cache. This led to incoherent behaviour, where the result
of an impl lookup would change depending on which ones had been done
previously.
Now we use a flag to track for each `.Self` if we're currently
type-checking inside the scope where it was introduced in a facet type.
While inside that scope, identify should not replace the `.Self`. Any
use of it should remain as-is since we don't yet know what value will
replace it. We call this state "frozen" since it should not be modified
by identify. This requires a substitution step when we leave the scope
that introduced the `.Self`, to remove the flag. The flag is set in the
`EntityName` of the `SymbolicBinding`, and is part of the canonical
value, since `.Self` can become part of types, which are constants, and
the flag needs to follow it for correct behaviour.
We also have to ensure the flag is the same when doing comparison with
constants from inside a facet type and constants from outside. For
instance in `(Z where .Z1 = ()) where .Z2 = .Z1`, when we arrive at the
second `.Z1` its `.Self` will be frozen, while the `.Z1 = ()` contains a
non-frozen `.Self`. So we add the frozen flag to the first when storing
it in `where_stack` in order to compare the constant values of the two
`.Z1`.
The `WhereExpr` requirement inst kinds now have an `InstConstantKind` of
`AlwaysUnique` instead of `Never`. This allows us to add them to the
usual InstBlocks, and in an `eval fn` body they have a constant value,
so eval does not fail when trying to call that function. We have to be
careful to not consider `AlwaysUnique` as being actually concrete
though, since their constant value erases `.Self`-dependence. This
allows us to stop special casing them when thawing the requirements
block in a `WhereExpr`, and we can just thaw each `InstId` in the block
in a straightforward manner.
We add the new flag to the instruction's fingerprint and name in
formatted semir.
This adds SemIR structs and implements building `observe` lists, as well
as naming, formatting, and importing `observe` declarations.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
In some cases the pattern block can depend on the initializer, so it
must be sequenced after it. See #7469 for a more detailed explanation of
why this is necessary.
The bulk of this change is changing most pattern insts to be `Always`
rather than `AlwaysUnique` constants, so that they can be wrapped in
`SpecificConstant`s to perform substitution. That then lets thunking
rely much more on `SpecificConstant` wrappers instead of deep-copying
the inst tree with modified types.
This approach to thunking should scale better, particularly as things
like form generics make function signatures more complex, because we can
leverage the existing support for constant evaluation and substitution.
Unfortunately, applying this approach to binding patterns will require
more work; see the TODO near the top of `thunk.cpp` for details.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Adds support for arithmetic and comparison operators on
`Core.CharLiteral`s, as well as conversions between `CharLiteral` and
integer types.
Make some minor tweaks to fix skill issues encountered while making this
change.
Assisted-by: Gemini via Antigravity
Implements proposal #7016: `self` moves from the deduced implicit list
(`fn F[self: Self]()`) to the front of the explicit list. Its type may
be written explicitly (`fn F(self: Self)`) or omitted, in which case it
defaults to `Self` (`fn F(self)`, `fn F(ref self)`); `self` in the
implicit list is rejected.
Throughout checking, `self` is modeled as the first explicit parameter.
Because a method is just a function whose first parameter is `self`, it
can also be called as an ordinary function with the receiver passed
explicitly (`Type.M(obj, ...)`), not only as `obj.M(...)`. A new
`SemIR::CallArgParamPatterns` helper chooses the parameters matched
against the explicit arguments, excluding a leading `self` only when it
is supplied as a method-call receiver; arity checking, conversion, and
generic deduction use it. The resulting SemIR and lowering are
unchanged: `self` is still `call_param0`, and witnesses, thunks, and
vtables are unaffected.
An omitted `self` type is parsed as a `SelfBindingPattern` node with no
type expression; checking synthesizes the `Self` type so it behaves
exactly like `self: Self`. However, the exact spelling used must match
between a forward declaration and a definition, following #3763's rules
around declaration matching.
Generated functions, thunks, and C++ interop import/export build `self`
as the first explicit parameter, and the `self`-type override (e.g.
Derived->Base for a virtual override) applies to the explicit `self`.
Placement is validated by new diagnostics: `SelfInImplicitParamList`,
`SelfNotFirstParam`, and `SelfOutsideParamList`. The benchmark source
generator and the documentation adopt the `(self)` shorthand; the
prelude, the examples, and the test data are migrated in the following
commits.
Assisted-by: Claude Code with Claude Opus 4.7
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.
Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.
Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
Fix some situations where we'd drop the storage argument when building
an in-place initializing expression. We now guarantee that an expression
with the in-place initializing category always has a storage argument.
This is only fixing the decision about *whether* to produce a witness.
Implementation of the witness is still a TODO, though where a body is
generated, it should also precisely reflect where one _needs_ to be
generated.
Note the tests:
- toolchain/lower/testdata/function/generic/import_core_witness.carbon
- toolchain/lower/testdata/function/generic/import_unused_def.carbon
These tests can probably be produced _without_ Core.Destroy, but I found
the essence of them while trying to build //examples with Core.Destroy
and a simpler minimization wasn't striking me.
Assisted-by: Google Antigravity with Gemini
---------
Co-authored-by: jonmeow <jperkins@google.com>
This will be used for const-evaling functions. Splitting into a separate
commit since it touches a lot of test files, and a couple fail_todo
tests are no longer failing.
When a `var` is not explicitly given an initializer, initialize it in
one of two ways:
* If its type implements the new interface `Core.Default`, call
`Core.Default.Op` to initialize it.
* Otherwise, if its type implements `UnformedInit`, leave it in an
unformed state. For now, this is always an uninitialized state, but that
will change in the future.
* If neither of those apply, the `var` declaration is ill-formed.
This is a step towards implementing leads decision #6739 and proposals
#257 and #5913.
Assisted-by: Gemini 3.1 Pro via Antigravity
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Add an `IntFitsIn` interface with a custom witness, such that `T impls
IntFitsIn(U)` if `T` is an integer type all of whose values fit
losslessly into the integer type `U`. Use it to constrain implicit
conversions between integer types.
So far, this has not been extended to the
`CppCompat.[U]{Long32,LongLong64}` types, only to `Core.Int(N)` and
`Core.UInt(N)`.
Assisted-by: Gemini 3 Pro via Antigravity
This is iterating on how `Destroy.Op` generates, to start adding body
capabilities. This changes the way the signature is created, and adds a
`CoreWitness` function kind so that mangling can prevent name
collisions. The result is that what _was_ `DestroyOp` is now
`Core.Destroy.Op` or, as can be seen in
toolchain/lower/testdata/interop/cpp/nullptr.carbon,
`_COp.<hash>:core.Destroy.Core` where `:core` is indicating that it's a
core witness (taking a note from `:thunk`).
Assisted-by: Google Antigravity with Gemini 3 Flash
This allows us to capture the location at which a type literal was used,
even in the cases where we don't otherwise need to create a new
instruction to represent the type such as for `char` or `str`.
The logic used to build the underlying type is now marked as desugaring.
For cases such as `iN`, this causes the call to `Core.Int` to no longer
be added as a dedicated IR instruction, and instead its constant value
is used directly as the value of the `type_literal`. This results in
this being on balance a reduction in the size of the IR.
This also fixes a crash in C++ interop when using a `char` literal as a
template argument. The crash was caused by the template argument not
having an associated location when mapping to a C++ location. See
changes to check/testdata/interop/cpp/template/type_param.carbon for an
example that used to crash before this change.
Update alias handling to allow an alias to point at any type literal,
reinstating support for aliases for type literals such as `bool` and
`i32` that had previously worked but stopped working when we
transitioned those types to being defined in the prelude. See changes to
toolchain/check/testdata/alias/builtins.carbon.
All the test changes other than the two mentioned above are mechanical
autoupdate changes switching to the new instruction.
Introduces `Context` and `SoftContext` messages, which can be introduced
through a `ContextBuilder`:
- The `Context` messages come before the diagnostic in the output.
- The first `Context` message steals the diagnostic level from the main
diagnostic, and turns the main diagnostic into a Note attached to the
context.
- A `SoftContext` message works similarly, but if it's preceeded by a
`Context` or `SoftContext` message, then it is dropped. This can be used
as a default/backup scope when nothing more interesting is provided up
the stack, such as in `TryEvalBlockForSpecific`.
The `ContextBuilder` is provided to a callback through
`Diagnostics::ContextScope`, an RAII type `AnnotationScope` but for
context messages.
This allows a high level operation to provide a context message like
"failed to identify facet type {0}" which will then be used as the error
if a diagnostic is produced during identification, with the latter
diagnostic attached as a note to explain why the contextual operation
failed.
In particular, this allows monomorphization errors (such as an array
bound being negative) to be attached to a higher lever operation instead
of being top-level diagnostics themselves, with the monomorphization
site being a note. This inverts the source code locations that appear in
the diagnostic, so that the top-level diagnostic points to the "user
code" which causes the monomorphization.
This is presented as an alternative strategy to #6753, which plumbed
diagnoser callbacks around to achieve the same goals.
We replace the diagnoser callbacks in type completion and operators with
ContextScope callbacks instead, which now provide better diagnostics for
monomorphization errors. Other callers to MakeSpecific do not yet have
ContextScopes introduced in order to turn monomorphization errors into
more interesting diagnostics.
This shifts logic a little so that empty top-level scopes are printed
less often. This affects imports mainly for now, but should be expected
to affect the soon-to-be-added generated scope more significantly.
Assisted-by: Google Antigravity with Gemini 3 Flash
Implementation of unused pattern bindings #2022, continued.
Whereas previous PR #6460 took care of parsing, and PR #6479 prepared
the stage by using _ in some test cases, this PR has the the actual
implementation, using a simple dataflow analysis.
---------
Co-authored-by: Burak Emir <bqe@google.com>
Co-authored-by: jonmeow <jperkins@google.com>
Currently each interface has a `Self` facet internally that becomes a
binding to every entity inside the interface: associated constants,
functions, and require decls. Each of these has to be independently
generic as a result. This makes is challenging in extended name lookup
to move into an extended scope of an interface, as we have a specific
for the interface, but the names within require a different specific
that includes a `Self` facet value.
We generalize this relationship by adding a second generic to Interface,
called `generic_with_self`. When we want to work with entities inside
the interface, we move from the interface-without-specific to the
interface-with-self specific by adding a Self to the specific. This is
done independently of any particular entity inside the Interface, as
those entities are now all members of the interface-with-self generic.
Associated constants no longer need a generic of their own, as they do
not have separate generic bindings. Functions retain a generic, but if
the function has no generic arguments, it will have no bindings of its
own now.
Require decls retain a generic so that their specific can be
instantiated separately from the interface. Requiring the interface to
be complete does not require the types in a require decl to be complete
unless it is modified by `extend`. So we allow them to be completed
later by keeping them in a separate generic.
Named constraints look like interfaces and gain the additional inner
generic-with-self, with the same relationship to require decls.
This removes the need for name lookup to perform Substitution of a Self
facet into the extended scope instruction. Instead, the
`SpecificConstant` instruction inserted by a `require` decl is part of
the interface-with-self generic. When looking through a FacetType for
extended scopes, for each interface, we push the scope with the specific
for the interface-with-self. Then the constant value of the
`SpecificConstant` is correctly modified by the provided self
automatically through applying that specific.
This is related to #6727, but is generally a necessary fix even without
that issue. I'm not adding a specific test of #6727 because it should
also be covered by the tests in #6726.
Assisted-by: Google Antigravity with Gemini 3 Flash
The primary change in this PR is to split the `Initializing` expression
category into separate `ReprInitializing` and `InPlaceInitializing`
categories, depending on whether initialization uses the types
initializing representation, or is guaranteed to be in place. It also
rationalizes and documents the SemIR-level semantics of those categories
(including where #5545's "ephemeral entire reference" category will
fit), and introduces two new inst kinds to close gaps exposed in the
process.
Some additional secondary changes:
- Consistently format the storage arguments of initializers with `to`,
regardless of whether initialization is in-place, and document the `to`
notation.
- Rename some inst kinds and functions, and restructure some of the
code, for clarity and consistency with the new documentation.
- Resolve a TODO to handle more category conversions in
`CategoryConverter`, in order to make it easier to reason about category
conversions.
See #6588 and the review history of this PR for background.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
The key changes are:
- Function output parameters are now prefixed with `out`, and more
consistently formatted as named parameters.
- Function and inst output arguments are now written as part of the inst
form, rather than as one of the inst arguments.
As a drive-by fix, this also changes `Temporary::storage_id` from
`DestInstId` to `InstId`, because it doesn't represent an output
parameter of the `Temporary` inst itself.
See the review of
[#6532](https://github.com/carbon-language/carbon-lang/pull/6532) and
[this Discord
discussion](https://discord.com/channels/655572317891461132/999638000126394370/1458268977020141589)
for additional background.
Also clarify and enforce that `ConversionTarget::init_id` is used only
as storage for in-place initialization, and correspondingly rename it to
`storage_id`.
Not all functions have a return slot, and once we have composite forms,
functions will be able to have any number of return slots. Obtaining a
unique return slot for a function only makes sense in `returned var`
handling.
Pursuant to recent decisions on #6124, switch `Destroy` to use a
`CustomWitness` for its implementation. Right now this is manufacturing
no-op implementation functions on each lookup, which obviously isn't
ideal but is intended as a first pass. I'm mostly trying to find the
right balance between updating the approach to reflect new decisions,
while still breaking apart work in a way.
The `CoreInterface` logic is intended to build on `CoreIdentifier`
support. We have a number of additional interfaces that require
specialized logic, and that'll extend pretty far with C++ interop, so it
seemed easiest to have a generic function for it. That's what's
replacing the logic inside C++ interop that was doing string comparisons
(which could have already been moved to `CoreIdentifier`, I just missed
it in my first pass).
This adds `CustomWitness` support because the `Destroy` witnesses can be
imported cross-file. `CustomWitness` was previously only used for C++
types, which don't yet support import, which is why that wasn't
previously an issue. The addition of `query_specific_interface_id` is
similarly needed in order to get correct sorting of witness blocks when
imported.
This PR also removes builtin constraint logic (note this is in a
separate commit to help review; it's not a separate PR because it's
difficult to split apart without tests breaking). This had been made
generic with the expectation that destroy, copy, move, and conversions
would all need related support. Under the new decision, we are not going
to do blanket impls and will instead just manufacture a `CustomWitness`
for everything.
A lot of SemIR fingerprints change, but that's probably because the
addition of `Destroy` on core classes is yielding structural changes.
Christopher Di Bella
Dana Jansens
Richard Smith
Nicholas Bishop
Chandler Carruth
Özgür T. ÖnsoyandDana Jansens
Geoff Romer
Jon Ross-Perkinsandjonmeow
