Lexer diagnostics used a single `const char*` as their source location,
which only allowed pointing at a single character rather than a run of
characters. This limited the underlining of unrecognized tokens, and
also made escape sequence diagnostics particularly strange by stopping
at whatever point the lexer discovered the error and pointing only at
that location. For example: `"\w"` was reported at the `w`, and `"\x"`
at the closing `"`.
This change tries to always keep the primary location of a diagnostic
the point at which typing (inserting or deleting) might fix the error.
So for `"\x"`, `\x` is underlined, but the position is at the `"` as
that's where you would type a hex code.
The lexer's emitter now takes a special lexing source location that
represents either a single position _between_ two characters, a single
character, or a range of the source buffer. The lexer diagnostics are
updated to construct these for the character range as appropriate.
Parser diagnostics for a missing token were located at the _next_ token,
which is particularly confusing for terminators like missing `;`s. Now
they are located at a position after the previous token, with or without
a space depending on the token, but typically on the same line.
Diagnostics still sort by how far the parser has read.
The parser diagnostics for unclosed groups also now attaches a label to
the opening token when it is on a separate line. And the diagnostics for
mismatched indent in a multi-line string attaches a label to the closing
`'''` that establishes that indent.
There are likely more location improvements we should do here, but this
seemed like a reasonable incremental improvement and is what Claude
found when doing an initial audit. One example where I think we should
make further improvements is around suggesting raw identifiers when we
find an unexpected `Cpp` or `Core` or `base`. We do this consistently
now, but raw identifiers should be rare. A TODO is added for these
cases.
Assisted-by: Claude Code
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Diagnostic rendering was part of the data model: `Loc::FormatLocation`
and
`Loc::FormatSnippet` wrote plain text to a stream, so no capability,
color, or
terminal width could reach them.
A diagnostic is now one message with labels, contexts, and location
information
attached, and `Diagnostics::Renderer` draws it into a
`Terminal::Buffer`. The
design is in `toolchain/docs/diagnostics_rendering.md` (#7668),
authoring in
`toolchain/docs/diagnostics.md`.
Before:
```
example.carbon:6:3: error: 1 argument passed to function expecting 0 arguments
Run0(1);
^~~~~~~
example.carbon:3:1: note: calling function declared here
fn Run0() {}
^~~~~~~~~~~
```
After:
```
error: 1 argument passed to function expecting 0 arguments
╭─┤ example.carbon:6:3
┆
3 │ fn Run0() {}
· ─────┬─────
· ╰──┤ calling function declared here
┆
-> 6 │ Run0(1);
· ───────
╰────────────
```
`--no-diagnostic-snippets` gives a compact form, `example.carbon:6:3-9`.
File
tests use it; the rendering tests under `toolchain/diagnostics/testdata`
ask for
snippets.
C++ interop diagnostics are data now rather than text Clang drew:
`SemIR::ClangSourceLocId` names a `clang::SourceRange`, and a Clang
location is
marked as the point it names.
`StreamConsumer` moves to a `:renderer` target that `:emitter` does not
depend
on, keeping `common/terminal` out of `consumer.h`. Capabilities come
from the
file behind the error stream, so tests get plain ASCII.
`renderer_fuzzer` draws diagnostics built from fuzzer bytes with every
capability combination, since a shape the renderer doesn't expect must
never be
why the compiler dies while reporting a problem.
TODOs mark the follow-ups: line weights and crossing lines, wrapping
that keeps
a quoted type whole, and ordering diagnostics that share a byte offset.
Also: `IncorrectExtension`'s hint moves into its message, since its note
had no
location of its own, and `strip_noise` in `check_diagnostics.py` blanks
multi-line `#define`s instead of deleting them.
Assisted-by: Claude Code
It's hard to track 2-space indent levels across large vertical gaps, and
it can be hard to suppress the instinct to read the dump as if it were
preorder. This change introduces a new dump mode that addresses both
problems by using box-drawing characters to explicitly represent the
parent-child edges of the tree. This new mode is the default, but the
old behavior remains available with
`--parse-dump-format=yaml-postorder`.
This is in addition to finding a `where` on the RHS of another `where`.
Since a generic binding introduces `.Self`, any `where` expression that
isn't part of a facet type modifying the binding itself would introduce
an ambiguous `.Self`.
Add virtual parse nodes for let, var, and form bindings, which goes
before the type. This allows us to track if `where` appears in the
binding's type. We only need to look for an invalid `where` if any
appeared in the type. We combine these three nodes together into a
single node kind, which requires us to remove the name from it as a
child. We move it up to the Pattern node again, and rename the
PatternStart nodes to PatternTypeStart as they are now located in the
middle of the Pattern nodes, just before the type.
And we only need to thaw `.Self` in generic bindings. Non-generic
bindings can only have `.Self` through a `where` expression, since the
name is not provided otherwise to non-generic bindings. And `where`
expressions thaw their `.Self` independently. So the binding only needs
to thaw a `.Self` that it introduced, which is only for generic
bindings.
If a keyword or a sized type literal (eg, `f2`) is used in a context
where we are confident that we are expecting an identifier -- either
before a `:` in a binding pattern or after a `.` in a member access or
designator -- then recover as if a raw identifier was used.
This appears to be a particular stumbling block for coding agents, so
seems worth paying special attention to.
Add a mechanism to the tokenized buffer to track additional tokens
synthesized for error recovery so that we can keep the lexed token
sequence immutable and still satisfy the invariants throughout the rest
of the toolchain for recovery tokens. Thanks to chandlerc for suggesting
this approach!
When parsing a pattern, if we encounter something that isn't pattern
syntax, try parsing as an expression instead. We only need one-token
lookahead to distinguish pattern syntax from expression syntax.
Track a precedence group through pattern parsing so that we can allow
different kinds of expressions in a top-level pattern (such as the
operand of `let`) and in a nested pattern (such as a subpattern of a
tuple pattern or within grouping parens). For example, we do not allow
`case if ...`, and for now I've chosen to also not allow logical or
relational operators at the top level of a pattern, so `case 1 + 1` is
OK, but `case 1 == 1` and `case true and false` require parentheses.
This decision should be ratified or revisited by a design proposal.
Very basic check support is also provided, only sufficient to form an
`ExprPattern` instruction and nothing beyond that. For now, all pattern
matching against an `ExprPattern` fails with a TODO error. To support
that, I've switched from calling `BeginSubpattern` in the parent handler
of a pattern and `EndSubpatternAs*` in the pattern handler itself to
calling both functions in parent handlers, with `EndSubpattern`
converting an expression into an expression pattern where needed.
Depends on #6976.
Assisted-by: Gemini via Google Antigravity
This change ensures that a function signature always starts with an
`IdentifierNameMaybeBeforeSignature` node (renamed from
`IdentifierNameBeforeParams`), even in the case of function declarations
like `fn F -> T` that have no parameter list. As a consequence, this
ensures that we push new entries onto `pattern_block_stack` and
`full_pattern_stack` when we start processing the function signature.
Parameter lists need substantially different treatment than tuple
patterns in other contexts, so this change splits them into separate
parse node kinds.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Change representation of package names from `IdentifierId` to
`PackageNameId`, and add a special value `PackageNameId::Core` for the
Core package. Add a `Core` expression to name the Core package, and
support for parsing the `Core` keyword in `package` and `import`
declarations.
For now, I've made no changes to instruction fingerprinting or name
mangling. This means that fingerprints and mangled names will collide
between names in the `Core` package and names in a `r#Core` package. See
#4908.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This change splits `NodeKind::IdentifierName` into separate node kinds
depending on whether the identifier is followed by parameters, and
similarly splits `NameQualifier` based on whether the qualifier has
parameters. This enables us to only push a pattern block when it's
actually needed, rather than "defensively" pushing one when it might be
needed.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
These don't fully work in check and beyond yet, because they're not
added into lexical lookup, but already mostly do the right thing.
Per #3407, disallow namespace declarations anywhere other than at file
scope for now.
We don't treat statements starting with a packaging introducer keyword
(`package`, `library`, `import`) as declarations because they're
sufficiently unlikely to occur that the error recovery doesn't seem
important, and this avoids needing to disambiguate `package.` at the
start of an expression.
Also surround it in square brackets rather than parentheses. This
matches the format used by Clang and GCC, and means diagnostics will
still match the `file:line:col: error: ` pattern used by some IDE tools.
Before:
```console
fail_builtins.carbon:11:11: error(AliasRequiresNameRef): alias initializer must be a name reference
```
After:
```console
fail_builtins.carbon:11:11: error: alias initializer must be a name reference [AliasRequiresNameRef]
```
Also tighten up test regex to only match on `STDERR` lines that list a
file name.
This is to help identify which diagnostics we're actually using.
Note that driver/testdata still has tests which don't pass this flag,
and so continue to test the kind-less (default) behavior.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.
This is a trivial code change, but ripples edits through test files.
This undoes parts of #3515 in order to allow PushGlobalInit to be called
when the initializer is called, instead of at the end of the binding
pattern. The current approach is fragile because supported patterns will
become more complex. We also will likely want similar support in `let`,
which puts the initializer first, so this offers a consistent approach
for both.
[Looking
back](https://discord.com/channels/655572317891461132/655578254970716160/1184237511766179840),
this is more or less the second option in that message, but using the
PeekNextIs to avoid vagueness about what's being popped first.
Note I'm putting in PeekNextIs for what I'm hoping will be a pretty
narrow use-case. I could've added depth arguments to the Peek functions,
but that would've rippled through a number of APIs and it's not clear to
me that this has generic utility. I mean, right now it could just be
PeekNextIsVariableInitializer, since it's only optional in that case.
Also stop supporting `var` with initializer inside `for`.
Resolves TODO in `handle_variable.cpp`
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This creates a namespace for `package` scope.
It looks like names of class_decls in namespaces lead to an unexpected
instref. This is already true, as best as I can tell. I'm not sure if
there's a preferred approach to address that, so I've left a TODO for
now.
Chandler CarruthandRichard Smith
Geoff Romer
Dana Jansens
David BlaikieandJon Ross-Perkins
josh11bandJosh L