Determining that a type has trivial destruction requires checking
whether all of its subobjects have trivial destruction and whether its
type has a custom witness for `Destroy.Op`. This isn't possible when
`Destroy` is the custodian for `Destroy.Op` and `SubobjectDestroy.Op`,
so we need to make `SubobjectDestroy` its own interface.
`Destroy.SelfDestruct` becomes a standalone function because it depends
on `SubobjectDestroy` and `Destroy` being implemented, and is also
responsible for generating any custom witnesses for both interfaces.
Making `SelfDestruct` an interface was experimented with, but this
required a blanket impl that caused issues for facet types.
`Destroy` depends on `SubobjectDestroy` to be implemented. We'd ideally
use `require impls SubobjectDestroy`, but it isn't complete yet, and it
also causes problems when `Destroy` is implemented inside the class
definition. We work around this by temporarily renaming the `Destroy`
interface to `DestroyImpl`, and introducing a constraint called
`Destroy` so that user code doesn't need to write `Core.SubobjectDestroy
& Core.Destroy`.
When identifying a facet type, defer evaluation of LookupImplWitnesses
by redirecting them to evaluate into IdentifiedWitness. Then the caller
of identify will need to substitute the IdentifiedWitnesses, either with
witnesses of their own, or with LookupImplWitness to cause a lookup
operation.
This allows:
- An `impl as` on a named constraint can subst the witnesses in
designators from the named constraint with a witness to the impl itself.
This prevents them from looking for and finding some other overlapping
impl. (This PR)
- Impl lookup to collect rewrite/equality requirements from all named
constraints and then use the impls it has already found to evaluate any
designators in those requirements instead of performing impl lookup
again (creating a cycle). (Done in
https://github.com/carbon-language/carbon-lang/pull/7944)
- Similarly, an `impl as` can collect impls and equality requirements
from all named constraints and verify them correctly by replacing
witnesses that should refer to the impl with the correct witness instead
of performing a lookup and finding an overlapping impl. (Done in
https://github.com/carbon-language/carbon-lang/pull/7937)
- ImplWitnessAccess to be able to find rewrites from a named constraint,
not just from the initial DeclaredFacetType. (TBD)
To do this we need to introduce the concept of "identified" specifics.
In order to identify a facet type, we must construct a specific for each
require decl in a named constraint. These specifics will have
IdentifiedWitnesses inside them, but their args would otherwise match a
specific for the require decl constructed in another context. To avoid
polluting the canonical specific namespace, we introduce a second
namespace of specifics that are "identified" since they are created by
identifying.
As we have introduced a new global state that modifies eval behaviour,
we must disable that state when resolving a specific (as per
https://github.com/carbon-language/carbon-lang/pull/7923). But inside an
"identified" specific, we preserve the behaviour so that the witnesses
modified by identify (through SubstPeriodSelf or through evaluating a
require specific) have their evaluation deferred.
Calls to functions with a `ref` or `val` return form whose type might be
initialized in place (such as a class type) were given temporary return
storage, based only on the return type. Caller pattern matching then
matched that storage against the callee's `ref_return_pattern` or
`value_return_pattern`, which only supports the callee side, and
CHECK-failed. Instead, base the decision on
`call_param_ranges.return_size()`, which is computed once from the same
return pattern when the callee's declaration is built, and assert the
same property in `ConvertCallArgs` before caller pattern matching.
Assisted-By: Claude
A function with a value return form, such as `->? form(val C)`, is
lowered to return the value representation of `C`: a pointer for types
with a pointer value representation. However, lowering of `ReturnExpr`
re-derived the return convention independently of the function's
signature, and assumed that any returned value expression was a
`returned var`, taking the initializing-return path. For types with an
in-place initializing representation, that tried to initialize a
nonexistent return slot and crashed. (This only appeared to work for
types like `i32`, whose by-copy initializing representation happens to
match the value representation.)
Fix this by recording how the function returns its result -- `void`, by
copy, by reference, in place via an `sret` parameter, or as the entry
point's implicit `i32` -- as a `ReturnKind` in `FunctionTypeInfo` and
`FunctionInfo` when the signature is lowered, and having the `Return`
and `ReturnExpr` handlers switch on it. This keeps the signature and the
`return` lowering in agreement by construction, and replaces the
`IsEntryPoint` check in `Return` lowering.
`BuildReturnWithExpr` handled init, ref, error, and symbolic return
forms, but hit `CARBON_FATAL("Unexpected inst kind")` for a `ValueForm`,
so a definition such as `fn F() ->? form(val i32) { return 1; }`
crashed. Convert the returned expression to a value of the form's type
component, mirroring the existing `RefForm` handling.
This change partially implements [PR #7362], which revises how objects
are destroyed. It is a partial implementation for two reasons:
1. This change moves `Destroy.Op`'s current behaviour into
`Destroy.SubobjectDestroy`, but it doesn't add support for objects with
non-trivial destruction.
2. `Destroy.SubobjectDestroy` is a workaround for `require impls
SubobjectDestroy`. We aren't able to use the latter until the dependents
add their requirements' implementations to their own witness tables.
[PR #7362]: https://github.com/carbon-language/carbon-lang/pulls/7362
Use a single `SemIR::Function` per `Core` interface method, whether it's
generated locally or imported. This prevents generating duplicate
functions, which lead to different types when the witness appears in a
`FacetValue` as part of a specific for a class.
We use a `CanonicalValueStore` of `GeneratedFunction` objects that allow
finding an existing FunctionId for a `Generated` special function before
(re-)generating it. Mangling for `Generated` functions is also moved to
use the values from the `GeneratedFunction`'s canonicalization key, so
that we have a consistent source of truth for the unique ID of a
`Generated` function across all files.
New tests are in
`toolchain/check/testdata/impl/custom_witness/destroy.carbon`.
Each file dump now starts with a `; ---` comment and ends with a blank
line. This makes it easier to visually scan the dump for a file of
interest. The comment format is somewhat arbitrary; I chose `---` to
align with the `--- filename.carbon` separator in SemIR dumps, but
without the filename, because that appears on each of the next two lines
already.
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.
Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.
Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
Use the Carbon-computed alignment for allocas, loads, stores, and
memcpys. Previously we used whatever LLVM felt like giving us, which
would result in ABI mismatches and runtime crashes due to misalignment
when creating objects of imported C++ class types, as well as resulting
in some surprising choices like `(i32, i32)` and `()` having 8-byte
alignment instead of 4 and 1, respectively.
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
When an initializing expression is used to initialize a var parameter,
we need to create the storage earlier in SemIR than the initializing
expression. To do so, pass a pending block to initialization containing
the var storage.
Also stop using `temporary` for this purpose, since we treat temporaries
as potentially-constant and immutable, but `var` parameters can be
mutated by the callee. We should ideally introduce a new kind of
instruction for this purpose but for now we just use `var_storage`.
This is only fixing the decision about *whether* to produce a witness.
Implementation of the witness is still a TODO, though where a body is
generated, it should also precisely reflect where one _needs_ to be
generated.
Note the tests:
- toolchain/lower/testdata/function/generic/import_core_witness.carbon
- toolchain/lower/testdata/function/generic/import_unused_def.carbon
These tests can probably be produced _without_ Core.Destroy, but I found
the essence of them while trying to build //examples with Core.Destroy
and a simpler minimization wasn't striking me.
Assisted-by: Google Antigravity with Gemini
---------
Co-authored-by: jonmeow <jperkins@google.com>
This includes checking and lowering for concrete form literals. Support
for symbolic forms is future work.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This updates lower/testdata to use _ instead of proper names, in order
to avoid the "unused binding" warnings from #2022 which are being
implemented. These changes do not depend on the implementation which
should make everything easier to review.
See #6460 with part 1 of the implementation. It was split upon request
in order to make reviewing easier, the original state of the PR was
updating hundreds of test cases.
The PR has thus been split, part 2 including test cases changes can be
viewed at
https://github.com/burakemir/carbon-lang/tree/unused_pattern_bindings_p2022_impl_part2
... many tests need to be updated, so it seems best to get those tests
out of the way that are not interesting.
These are not all tests in lower/testdata - a few of them are
interesting in the sense that they cannot use '_' because it leads to
failed redeclaration check. This is exactly the scenario described in
#3763 which requires the 'unused' marker. Those are left untouched here
but are updated in
https://github.com/burakemir/carbon-lang/tree/unused_pattern_bindings_p2022_impl_part2
This adds just enough debug info for i32/int parameters and return
values, with a path forward for adding DWARF type metadata for other
types.
As it happens, return type information is carried separately from
parameter information:
* Return type information is carried in the `type` of the `DISubprogram`
(as a `DISubroutineType` - which does carry parameter type information
as well, but that's unused when the DWARF is emitted by LLVM)
* Parameter information is carried by `DILocalVariable`s with a non-zero
`arg` value (representing the order of function parameters)
In the absence of locations for the parameters (future work), nothing
would usually keep the `DILocalVariable` live/reachable when emitting
DWARF - so for cases where this can happen (for clang, this happens in
optimized builds where all references to the parameter variable might be
optimized away) the variables can be "retained" in a list on the
`DISubprogram` - achieved by passing `AlwaysPreserve` parameter to
`createParameterVariable` (adds them to a list, then that list gets
attached to the `DISubprogram` when it's finalized later)
For now, any unsupported types are emitted as `void*` (except void
return, which is implemented as void) as a placeholder.
Given this example:
```
import Core library "io";
class MyClass {
}
fn Unsupported(v: MyClass) {
}
fn Ret() -> i32 {
return 42;
}
fn Arg(x: i32) {
Core.Print(x);
}
fn Run() {
}
```
this is the resulting DWARF:
```
DW_TAG_compile_unit
DW_AT_name ("test.carbon")
DW_TAG_subprogram
DW_AT_name ("Unsupported")
DW_TAG_formal_parameter
DW_AT_type (0x00000066 "void *")
DW_TAG_subprogram
DW_AT_name ("Ret")
DW_AT_type (0x00000062 "int")
DW_TAG_subprogram
DW_AT_name ("Arg")
DW_TAG_formal_parameter
DW_AT_type (0x00000062 "int")
DW_TAG_subprogram
DW_AT_name ("Run")
DW_TAG_base_type
DW_AT_name ("int")
DW_TAG_pointer_type
```
And the debugger:
```
(gdb) p Ret()
$1 = 42
(gdb) p Arg(4)
4
$2 = void
```
I'm not sure if there's a way this logic should be merged with the logic
for making the `llvm::Function` type (which the `DISubroutineType`
building code was inspired by/copied from) - since they're done at
different times/places, I don't think there's an easy way to do it in
one pass, but maybe the code can be shared (even if it's run twice) in
some generic `SemIR::Function` type walker.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This helps at least lldb handle calling functions (currently the debug
info describes every function as `void()`, so no parameters or return
values are supported) - seems gdb and lldb both depend on demangling to
varying degrees in C code (marking a function as "prototyped" in C in
DWARF does seem to also address this problem).
Given:
```
fn PrintThree() {
Core.Print(3);
}
```
Before:
```
(lldb) p PrintThree()
error: Couldn't look up symbols:
PrintThree
Hint: The expression tried to call a function that is not present in
the target, perhaps because it was optimized out by the compiler.
```
After:
```
(lldb) p PrintThree()
3
(lldb)
```
Adds a flag `--optimize=<mode>` that specifies what to optimize for:
* `--optimize=none` turns off the optimizer as much as possible, but
still respects always_inline.
* `--optimize=debug` aims to be the equivalent of `-Og` / `-O1`, and
provides optimizations that don't affect the ability to debug the
program. This is the default.
* `--optimize=size` optimizes for the size of the produced program, and
aims to be the equivalent of `-Oz`.
* `--optimize=speed` optimizes for the execution time of the produced
program, and aims to be the equivalent of `-O3`.
Following the approach taken by Clang, the optimization level feeds into
both the configuration of the LLVM pass pipeline and the attributes
added to function definitions generated by the frontend.
Optimization is performed in a new phase, `optimize`, which runs between
`lower` and `codegen`.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
This changes `Destroy` to use an interface for its implementation.
Note that this change includes a lot of test updates. Even when
`Destroy` is a no-op, it still causes code generation as part of
determining that.
Originally I was trying to use ranges to cut down the scope of this, and
to a degree I think they have. But a flipside here is that cases where
no destructors should be generated -- particularly globals -- would be
needed to completely remove destructor calls. Even for ranges, the range
can often include the destructor placement. So I've shifted
frame-of-thought a little: accept a bunch of destructor churn, because
destructors are needed and will be prevalent. The verbosity is a feature
of the design to make desugaring apparent in IR, not a bug.
Previously we created allocas for temporaries at whatever point in the
output LLVM function we'd reached. This would result in these being
dynamic allocas (performing a dynamic stack allocation), which is
inefficent and can lead to a stack overflow if it happens in a loop.
Switch to putting the allocas in the entry block instead, and instead
generate a lifetime start marker when we reach the point where the
temporary is introduced. We already did this for local variables; this
is just factoring out and reusing that code.
Adds min-preludes to a few more slowest tests, and adds them to most of
the lowering tests, with a few exceptions that make use of operators.
This take the runtime of file_test down from about 8s to about 7s on my
machine.
We add support for Negate on uints in the min-preludes.
This drops the wall clock time for running file_test from 10s to 8s on
my machine. There's many more tests to convert, as each one takes the
test from ~1s to ~100ms. Compiling the full prelude is a bit slow now
since #5653, and before that file_test was taking about 3.5s.
We introduce a few more flavours of min_prelude to support more tests.
- The actual reason I started this: minor lowering updates in the golden
LLVM IR
- Process.inc changed enough to need a patch context update.
- https://github.com/llvm/llvm-project/pull/123126 added `proto_library`
uses without a `load`, which is broken in bazel 8
- Just commenting these out because we don't use them. I'll follow up
separately about a possible fix, but continuing to use `WORKSPACE` is a
bigger issue LLVM probably should address.
- Note this update is also triggering removal of `migrate_cpp`, in #4887
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Non-entry-block allocas will allocate new stack memory each time they're
reached, resulting in leaking stack memory over time for allocas in a
loop. Move all such allocas to the entry block instead, and use an LLVM
intrinsic to mark when the lifetime of the variable actually begins.
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When an `IntLiteral` appears as an operand of an `if` expression,
convert it to `i32` for now, so that we don't reject things like `if
cond then 1 else 2` due to having a non-constant value of type
`IntLiteral`.
For tuple indexing expressions such as `(a, b).0`, convert the index to
type `IntLiteral`, not to type `i32`. This isn't strictly necessary to
do in this PR, but avoids the need to provide an `IntLiteral` -> `i32`
implicit conversion for `no_prelude` tests using this syntax.
Also propagate the pattern IR along with the pattern-match IR, and use
it where appropriate.
Strictly speaking, some parts of the pattern-match IR are allocated
eagerly, while traversing the pattern's parse tree, but they still
aren't actually emitted until we traverse the associated pattern insts.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Christopher Di Bella
Dana Jansens
Geoff Romer
David Blaikie
Nicholas Bishop
Richard Smith
Jon Ross-Perkinsandjonmeow
Burak Emir
josh11bandJosh L
Brymer Meneses