Determining that a type has trivial destruction requires checking
whether all of its subobjects have trivial destruction and whether its
type has a custom witness for `Destroy.Op`. This isn't possible when
`Destroy` is the custodian for `Destroy.Op` and `SubobjectDestroy.Op`,
so we need to make `SubobjectDestroy` its own interface.
`Destroy.SelfDestruct` becomes a standalone function because it depends
on `SubobjectDestroy` and `Destroy` being implemented, and is also
responsible for generating any custom witnesses for both interfaces.
Making `SelfDestruct` an interface was experimented with, but this
required a blanket impl that caused issues for facet types.
`Destroy` depends on `SubobjectDestroy` to be implemented. We'd ideally
use `require impls SubobjectDestroy`, but it isn't complete yet, and it
also causes problems when `Destroy` is implemented inside the class
definition. We work around this by temporarily renaming the `Destroy`
interface to `DestroyImpl`, and introducing a constraint called
`Destroy` so that user code doesn't need to write `Core.SubobjectDestroy
& Core.Destroy`.
When identifying a facet type, defer evaluation of LookupImplWitnesses
by redirecting them to evaluate into IdentifiedWitness. Then the caller
of identify will need to substitute the IdentifiedWitnesses, either with
witnesses of their own, or with LookupImplWitness to cause a lookup
operation.
This allows:
- An `impl as` on a named constraint can subst the witnesses in
designators from the named constraint with a witness to the impl itself.
This prevents them from looking for and finding some other overlapping
impl. (This PR)
- Impl lookup to collect rewrite/equality requirements from all named
constraints and then use the impls it has already found to evaluate any
designators in those requirements instead of performing impl lookup
again (creating a cycle). (Done in
https://github.com/carbon-language/carbon-lang/pull/7944)
- Similarly, an `impl as` can collect impls and equality requirements
from all named constraints and verify them correctly by replacing
witnesses that should refer to the impl with the correct witness instead
of performing a lookup and finding an overlapping impl. (Done in
https://github.com/carbon-language/carbon-lang/pull/7937)
- ImplWitnessAccess to be able to find rewrites from a named constraint,
not just from the initial DeclaredFacetType. (TBD)
To do this we need to introduce the concept of "identified" specifics.
In order to identify a facet type, we must construct a specific for each
require decl in a named constraint. These specifics will have
IdentifiedWitnesses inside them, but their args would otherwise match a
specific for the require decl constructed in another context. To avoid
polluting the canonical specific namespace, we introduce a second
namespace of specifics that are "identified" since they are created by
identifying.
As we have introduced a new global state that modifies eval behaviour,
we must disable that state when resolving a specific (as per
https://github.com/carbon-language/carbon-lang/pull/7923). But inside an
"identified" specific, we preserve the behaviour so that the witnesses
modified by identify (through SubstPeriodSelf or through evaluating a
require specific) have their evaluation deferred.
As described in proposal #4682, make `array(T, N)` be syntactic sugar
for the type `Core.Array` defined in the standard library. This provides
a home for impls that are specific to `Core.Array`.
Assisted-by: Gemini and Claude via Antigravity
This change partially implements [PR #7362], which revises how objects
are destroyed. It is a partial implementation for two reasons:
1. This change moves `Destroy.Op`'s current behaviour into
`Destroy.SubobjectDestroy`, but it doesn't add support for objects with
non-trivial destruction.
2. `Destroy.SubobjectDestroy` is a workaround for `require impls
SubobjectDestroy`. We aren't able to use the latter until the dependents
add their requirements' implementations to their own witness tables.
[PR #7362]: https://github.com/carbon-language/carbon-lang/pulls/7362
Use a single `SemIR::Function` per `Core` interface method, whether it's
generated locally or imported. This prevents generating duplicate
functions, which lead to different types when the witness appears in a
`FacetValue` as part of a specific for a class.
We use a `CanonicalValueStore` of `GeneratedFunction` objects that allow
finding an existing FunctionId for a `Generated` special function before
(re-)generating it. Mangling for `Generated` functions is also moved to
use the values from the `GeneratedFunction`'s canonicalization key, so
that we have a consistent source of truth for the unique ID of a
`Generated` function across all files.
New tests are in
`toolchain/check/testdata/impl/custom_witness/destroy.carbon`.
Instead of tracking the cleanup scope depth on entry to each scope,
track an "ambient" cleanup scope depth that's *after* the destructors of
local variables in that scope. This gets increased to include the
destructors of local variables when we create a name-binding
declaration. Then, when we reach a point where temporaries should be
destroyed, run cleanups that are after the ambient cleanup scope depth
on the stack. This happens:
* At the `;` of a statement expression.
* At the `)` of an `if` or `while` statement.
* After performing the implied `HasValue()` call in a `for` statement.
Per informal agreement with leads, this means we lifetime-extend all
temporaries created in the initializer of a name-binding declaration to
the full scope of that declaration, but that temporaries created in an
expression statement are destroyed at the `;`.
Fix a few API issues. There's also a newly-added file in compiler-rt
that is not supposed to be built by default but is not being excluded
properly by a glob. Added a patch to exclude that and sent
https://github.com/llvm/llvm-project/pull/208861 upstream.
Each file dump now starts with a `; ---` comment and ends with a blank
line. This makes it easier to visually scan the dump for a file of
interest. The comment format is somewhat arbitrary; I chose `---` to
align with the `--- filename.carbon` separator in SemIR dumps, but
without the filename, because that appears on each of the next two lines
already.
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.
Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.
Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
Use the Carbon-computed alignment for allocas, loads, stores, and
memcpys. Previously we used whatever LLVM felt like giving us, which
would result in ABI mismatches and runtime crashes due to misalignment
when creating objects of imported C++ class types, as well as resulting
in some surprising choices like `(i32, i32)` and `()` having 8-byte
alignment instead of 4 and 1, respectively.
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
This is only fixing the decision about *whether* to produce a witness.
Implementation of the witness is still a TODO, though where a body is
generated, it should also precisely reflect where one _needs_ to be
generated.
Note the tests:
- toolchain/lower/testdata/function/generic/import_core_witness.carbon
- toolchain/lower/testdata/function/generic/import_unused_def.carbon
These tests can probably be produced _without_ Core.Destroy, but I found
the essence of them while trying to build //examples with Core.Destroy
and a simpler minimization wasn't striking me.
Assisted-by: Google Antigravity with Gemini
---------
Co-authored-by: jonmeow <jperkins@google.com>
This will be used for const-evaling functions. Splitting into a separate
commit since it touches a lot of test files, and a couple fail_todo
tests are no longer failing.
Roll LLVM to `6811a83c81500ee373adfc0d9978ff9625a4cf1c`.
This includes https://github.com/llvm/llvm-project/pull/183831 which
moved the functionality of `finish()` on `DiagnosticConsumer`s into the
destructors, and removed the `finish()` method. So, our callers to
`finish()` are migrated to cause the destructor to run at that time
instead.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Add a new builtin function `cpp.std.initializer_list.make` that takes an
array and returns a `std::initializer_list`, initialized to refer to
that array. When C++ initialization wants to perform a
`std::initializer_list`-from-array construction, synthesize a
declaration of a matching builtin function and use that to perform the
initialization.
Ideally we would specify this conversion as an impl of `ImplicitAs` in
the prelude instead of hardcoding it in the interop layer, but
unfortunately that's not currently possible, for various reasons -- we
can't make the conversion form-generic, we can't deduce the array length
from the initializer, and we can't deduce against the arguments of
imported C++ class templates yet -- so for now synthesizing a builtin
function on demand is the best we can do.
Assisted-by: Gemini 3 Pro via Antigravity
Christopher Di Bella
Dana Jansens
Nicholas BishopandPo-Chun Lee
Geoff Romer
Richard Smith
David Blaikie
Jon Ross-Perkinsandjonmeow
