Commit Graph
238 Commits
Author SHA1 Message Date
Dana Jansens 9fb428d713 Ensure specific in ImplWitness has resolved definition before accessing witness table (#8040)
When impl lookup results in an `ImplWitness`, either directly or later
through `LookupImplWitness` evaluating to an `ImplWitness` inside some
specific, it represents a dependency on the eval blocks of the
`ImplDecl` that the `ImplWitness` comes from. The `ImplWitness` contains
a `SpecificId` of the `ImplDecl`, and the constants in the witness table
must be viewed through that `SpecificId`. The constants may depend on
the declaration or the definition block of the `ImplDecl`'s specific, so
any use of the witness table from `ImplWitness` requires the specific
from the `ImplWitness` to be fully resolved: both the decl and
definition blocks.

The specific declaration block is always resolved immediately when
forming a specific id, so there's nothing to do there. And things are
simple when the `ImplWitness` returned from impl lookup is concrete. We
would simply resolve the specific definition directly in the evaluation
of `LookupImplWitness`.

But when the `ImplWitness` is symbolic, meaning there's a dependency on
generic parameters in its referenced specific, then we have a dependency
on resolving the specific definition in the `ImplWitness` for every
specific that gets applied to the `ImplWitness`, eventually resulting in
a concrete specific.

Previously we attempted to do this by representing a dependency edge
from the eval block containing the `ImplWitness` instruction to the
definition block of the specific inside the `ImplWitness`. We
represented this dependency edge with the `RequireSpecificDefinition`
instruction.

The challenge with the `RequireSpecificDefinition` instruction was
ensuring it always landed in the _same eval block_ as the one holding
the symbolic `ImplWitness`. Ultimately, we've found a way to do this
without the `RequireSpecificDefinition`. The witness table is accessed
through `ImplWitnessAccess`, so we resolve the specific definition
before each access to the witness table. If the definition is already
resolved, this just costs a lookup of the Specific from the value store.

We document the other things we tried, which don't work or were too
complex, below.

In PR #6236, we added the `RequireSpecificDefinition` instruction in the
eval of `LookupImplWitness`, but this is too late. If impl lookup
resolved to a symbolic `LookupImplWitness`, the `LookupImplWitness` is
added some eval block. Later, we form specifics and re-evaluate that
eval block, and the `LookupImplWitness` can evaluate to an
`ImplWitness`. Adding the `RequireSpecificDefinition` instruction at
this point inserts the instruction into whatever generic's eval block
happens to be on the top of the generic stack, not the eval block of the
generic we are building a specific for. And indeed we can't add
instructions to a generic's eval block later like this, as it would be
missing from specifics that were already resolved for the generic. This
incorrect insertion shows up as a crash in eval at the CHECK introduced
but commented out in [eval.cpp in
#7981](https://github.com/carbon-language/carbon-lang/blob/56d9bbc40add1e9263f2f9b2555c3a27292d1725/toolchain/check/eval.cpp#L3507-L3512).
This is covered by the
`require_specific_impl_definition_through_specific_instantiation.carbon`
test.

We tried moving the insertion of `RequireSpecificDefinition` to be
earlier - at the point where the `LookupImplWitness` is constructed, in
the `LookupImplWitness()` function, instead of inside evaluation. This
seemed like a straightforwardly correct answer, as the eval block that
contains the `LookupImplWitness` will then also contain the
`RequireSpecificDefinition`. However, this can cause us to lose the
`RequireSpecificDefinition` entirely. Because it's a separate
instruction, not an operand of `LookupImplWitness`, it does not get
treated as a dependency of the witness. When we do an impl lookup inside
an `alias`, we build a generic for the alias and then discard it. This
discards the eval block containing the `LookupImplWitness`. Then, in an
enclosing generic, we refer to the constructed `AliasDecl` instruction,
which pulls all its dependent operands into the enclosing eval block.
This pulls in the `LookupImplWitness` into the enclosing eval block, but
it does not preserve the `RequireSpecificDefinition`. This is covered by
the
`require_specific_impl_definition_from_lookup_impl_witness_in_class_definition.carbon`
test.

We tried having `ImplWitness` evaluation resolve the specific definition
of the specific `ImplDecl` it refers to. This seems like the simplest
approach by far as we should always be working with the correct eval
block and nothing can get lost. However it does not work because of the
recursive nature of `ImplWitness`. The `ImplWitness` instruction appears
in the declaration of an `ImplDecl`, and the `ImplWitness` holds a
`SpecificId` for that same `ImplDecl`. When building a specific
`ImplDecl`, we evaluate the `ImplWitness` in the `ImplDecl`'s
declaration block which then immediately resolves the specific
definition before the declaration is finished. This leads to missing
instructions in the specific definition. In short, this puts the
dependency edge to the `ImplDecl`'s specific inside the `ImplDecl`
itself, which is problematic.

We tried wrapping `ImplWitness` in another instruction,
`ImplWitnessUse`. Inside the `ImplDecl` declaration there is still
`ImplWitness`, but then in the definition there is `ImplWitnessUse` and
that is what is returned from the evaluation of `LookupImplWitness`. The
`ImplWitnessUse` is an `ImplWitness` plus it ensures the specific
referred to by the witness has its definition resolved. However this
breaks constant comparisons, as we get different witnesses inside an
impl versus outside.

The first iteration of this PR's solution had us insert the
`RequireSpecificDefinition` into the eval block when we sniffed a
`LookupImplWitness` instruction, however that missed cases where impl
lookup immediately resolved to a symbolic `ImplWitness`, which is why we
now sniff for the `ImplWitness` in the eval block. This is covered by
the
`require_specific_impl_definition_from_symbolic_impl_in_class_definition.carbon`
test.

We also originally made a mistake of not inserting
`RequireSpecificDefinition` when inside the impl definition that the
`ImplWitness` refers to. But we can form specifics ImplWitness values
through function signatures, and these must add the dependency edge on
that specific ImplDecl definition. This is covered by the
`require_specific_impl_definition_from_inside_impl_definition.carbon`
test.

Finally, we did have a working solution. It was to sniff instructions
added to the eval block of a generic, and when an `ImplWitness` is added
to the eval block (it is implied that it is symbolic), also add a
`RequireSpecificDefinition` to that eval block immediately. We also
resolved the definition of a specific referred to by `ImplWitness` when
`LookupImplWitness` evaluates to `ImplWitness` to cover the concrete
witness case. This complicated the construction of the eval block
immensely, however. It caused a situation where adding one inst to the
eval block actually adds two, which we needed to avoid when importing.
And it required inst-kind specific behaviour in the very general
construction of an eval block, completely outside of eval itself.
2026-11-03 14:15:14 +00:00
Christopher Di Bella 05a7ecbd34 Move SubobjectDestroy and SelfDestruct out of interface Destroy (#7942)
Determining that a type has trivial destruction requires checking
whether all of its subobjects have trivial destruction and whether its
type has a custom witness for `Destroy.Op`. This isn't possible when
`Destroy` is the custodian for `Destroy.Op` and `SubobjectDestroy.Op`,
so we need to make `SubobjectDestroy` its own interface.

`Destroy.SelfDestruct` becomes a standalone function because it depends
on `SubobjectDestroy` and `Destroy` being implemented, and is also
responsible for generating any custom witnesses for both interfaces.
Making `SelfDestruct` an interface was experimented with, but this
required a blanket impl that caused issues for facet types.

`Destroy` depends on `SubobjectDestroy` to be implemented. We'd ideally
use `require impls SubobjectDestroy`, but it isn't complete yet, and it
also causes problems when `Destroy` is implemented inside the class
definition. We work around this by temporarily renaming the `Destroy`
interface to `DestroyImpl`, and introducing a constraint called
`Destroy` so that user code doesn't need to write `Core.SubobjectDestroy
& Core.Destroy`.
2026-10-26 21:35:01 +00:00
Chandler Carruth 2c9739799b Render diagnostics through the terminal library (#7683)
Diagnostic rendering was part of the data model: `Loc::FormatLocation`
and
`Loc::FormatSnippet` wrote plain text to a stream, so no capability,
color, or
terminal width could reach them.

A diagnostic is now one message with labels, contexts, and location
information
attached, and `Diagnostics::Renderer` draws it into a
`Terminal::Buffer`. The
design is in `toolchain/docs/diagnostics_rendering.md` (#7668),
authoring in
`toolchain/docs/diagnostics.md`.

Before:

```
example.carbon:6:3: error: 1 argument passed to function expecting 0 arguments
  Run0(1);
  ^~~~~~~
example.carbon:3:1: note: calling function declared here
fn Run0() {}
^~~~~~~~~~~
```

After:

```
error: 1 argument passed to function expecting 0 arguments
       ╭─┤ example.carbon:6:3
       ┆
     3 │ fn Run0() {}
       · ─────┬─────
       ·      ╰──┤ calling function declared here
       ┆
->   6 │   Run0(1);
       ·   ───────
       ╰────────────
```

`--no-diagnostic-snippets` gives a compact form, `example.carbon:6:3-9`.
File
tests use it; the rendering tests under `toolchain/diagnostics/testdata`
ask for
snippets.

C++ interop diagnostics are data now rather than text Clang drew:
`SemIR::ClangSourceLocId` names a `clang::SourceRange`, and a Clang
location is
marked as the point it names.

`StreamConsumer` moves to a `:renderer` target that `:emitter` does not
depend
on, keeping `common/terminal` out of `consumer.h`. Capabilities come
from the
file behind the error stream, so tests get plain ASCII.

`renderer_fuzzer` draws diagnostics built from fuzzer bytes with every
capability combination, since a shape the renderer doesn't expect must
never be
why the compiler dies while reporting a problem.

TODOs mark the follow-ups: line weights and crossing lines, wrapping
that keeps
a quoted type whole, and ordering diagnostics that share a byte offset.

Also: `IncorrectExtension`'s hint moves into its message, since its note
had no
location of its own, and `strip_noise` in `check_diagnostics.py` blanks
multi-line `#define`s instead of deleting them.

Assisted-by: Claude Code
2026-10-15 06:08:57 +00:00
Dana Jansens 24766e213e Defer evaluation of witnesses substituted while identifying a facet type (#7930)
When identifying a facet type, defer evaluation of LookupImplWitnesses
by redirecting them to evaluate into IdentifiedWitness. Then the caller
of identify will need to substitute the IdentifiedWitnesses, either with
witnesses of their own, or with LookupImplWitness to cause a lookup
operation.

This allows:
- An `impl as` on a named constraint can subst the witnesses in
designators from the named constraint with a witness to the impl itself.
This prevents them from looking for and finding some other overlapping
impl. (This PR)
- Impl lookup to collect rewrite/equality requirements from all named
constraints and then use the impls it has already found to evaluate any
designators in those requirements instead of performing impl lookup
again (creating a cycle). (Done in
https://github.com/carbon-language/carbon-lang/pull/7944)
- Similarly, an `impl as` can collect impls and equality requirements
from all named constraints and verify them correctly by replacing
witnesses that should refer to the impl with the correct witness instead
of performing a lookup and finding an overlapping impl. (Done in
https://github.com/carbon-language/carbon-lang/pull/7937)
- ImplWitnessAccess to be able to find rewrites from a named constraint,
not just from the initial DeclaredFacetType. (TBD)

To do this we need to introduce the concept of "identified" specifics.
In order to identify a facet type, we must construct a specific for each
require decl in a named constraint. These specifics will have
IdentifiedWitnesses inside them, but their args would otherwise match a
specific for the require decl constructed in another context. To avoid
polluting the canonical specific namespace, we introduce a second
namespace of specifics that are "identified" since they are created by
identifying.

As we have introduced a new global state that modifies eval behaviour,
we must disable that state when resolving a specific (as per
https://github.com/carbon-language/carbon-lang/pull/7923). But inside an
"identified" specific, we preserve the behaviour so that the witnesses
modified by identify (through SubstPeriodSelf or through evaluating a
require specific) have their evaluation deferred.
2026-10-14 14:12:56 +00:00
Geoff Romer 62f1cc6a35 Rename GenericClassType to ParameterizedClassType (#7953)
The old name was potentially confusing, because non-parameterized
generic classes do not use this inst kind.
2026-10-11 23:09:12 +00:00
Christopher Di Bella e8fda4519c Enable SubobjectDestroy.Op to destroy tuples (#7842)
This is a partial implementation of #7362.
2026-09-29 17:23:20 +00:00
Christopher Di Bella b0bc5ed338 Enable SubobjectDestroy.Op to destroy a struct's fields (#7829)
This is a partial implementation of #7362.
2026-09-29 00:13:37 +00:00
Christopher Di Bella 6abcfa24b2 Classify decorated built-in types as trivially destructible (#7847)
Types like constant pointers and `MaybeUnformed(i32)` should have
trivial destruction, but were classified as non-trivially destructible.
2026-09-28 23:16:19 +00:00
Christopher Di Bella b227419d8d Classify classes with no struct fields as trivially destructible (#7846) 2026-09-28 22:39:03 +00:00
Christopher Di Bella f7cd39428e Add Destroy.SubobjectDestroy as a temporary replacement for Destroy.Op (#7773)
This change partially implements [PR #7362], which revises how objects
are destroyed. It is a partial implementation for two reasons:

1. This change moves `Destroy.Op`'s current behaviour into
`Destroy.SubobjectDestroy`, but it doesn't add support for objects with
non-trivial destruction.
2. `Destroy.SubobjectDestroy` is a workaround for `require impls
SubobjectDestroy`. We aren't able to use the latter until the dependents
add their requirements' implementations to their own witness tables.

[PR #7362]: https://github.com/carbon-language/carbon-lang/pulls/7362
2026-09-24 00:06:28 +00:00
Dana Jansens fcae9610bd Make SemIR::TypeType be an empty FacetType instruction (#7813)
The type `type` is now a `FacetType` inst with no constraints. This
brings the model implemented in the toolchain into better alignment with
the language design. The `SemIR::TypeType` struct remains as a scope for
holding the `TypeInstId`, `ConstantId`, and `TypeId` constants, but is
not an `InstKind` anymore.

The `TypeType` inst looks a lot like singletons, but there are many
`FacetType` insts so it doesn't quite fit that model. So we put it
alongside singletons with a fixed inst id but refer to it as a more
general "builtin" inst that is not a singleton.
`Namespace::PackageInstId` is similar, and we group it with `TypeType`
conceptually as another builtin instruction with a fixed id.

No conversion is needed anymore to use a `type` as a facet, since types
also have a `FacetType` type. This simplifies and removes a number of
helpers and branches throughout the code.

The `TypeType` inst is now part of the constant store, so we end up
printing it in the constants block in every test. But it's also named
`type` rather than `%type` to preserve the majority of existing
formatting behaviour, though this does look different from other
constants.

Assisted-by: Opus 5 was used to generate a first draft and validate the
refactoring. Though nearly everything non-trivial the tool wrote has
been modified or rewritten.
2026-09-22 15:04:40 +00:00
Dana Jansens 4416f3525b Canonicalize generated functions for Core witnesses (#7729)
Use a single `SemIR::Function` per `Core` interface method, whether it's
generated locally or imported. This prevents generating duplicate
functions, which lead to different types when the witness appears in a
`FacetValue` as part of a specific for a class.

We use a `CanonicalValueStore` of `GeneratedFunction` objects that allow
finding an existing FunctionId for a `Generated` special function before
(re-)generating it. Mangling for `Generated` functions is also moved to
use the values from the `GeneratedFunction`'s canonicalization key, so
that we have a consistent source of truth for the unique ID of a
`Generated` function across all files.

New tests are in
`toolchain/check/testdata/impl/custom_witness/destroy.carbon`.
2026-09-15 16:02:13 +00:00
Richard Smith 7c966c2d59 Initialize specifics in-place. (#7717)
Don't wait until we reach the end of the eval block to set the value
block on the specific. This is a prerequisite for allowing template
actions to read from the specific.
2026-09-03 17:06:22 +00:00
Geoff Romer d21cc3197f Fix the textual IR name of WrapperBindingPattern (#7650)
`at_binding_pattern` is a relic from an earlier revision of #6930.
2026-08-18 22:31:27 +00:00
Christopher Di BellaandRichard Smith 4ea5ef45dd Skip ImplWitnessTable::elements_id when generating fingerprints (#7629)
Implementing interface modifiers causes an infinite loop when generating
fingerprints because the witness value generates a fingerprint that's
dependent on something dependent on the witness value. We've debugged
this to the witness table's `elements_id` field.

This hack is a workaround for creating a new block type whose value is
not codependent with its identity.

Co-authored-by: Richard Smith <richard@metafoo.co.uk>

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2026-08-11 22:39:30 +00:00
Richard Smith 703529fc55 Destroy temporaries at the end of expression statements. (#7513)
Instead of tracking the cleanup scope depth on entry to each scope,
track an "ambient" cleanup scope depth that's *after* the destructors of
local variables in that scope. This gets increased to include the
destructors of local variables when we create a name-binding
declaration. Then, when we reach a point where temporaries should be
destroyed, run cleanups that are after the ambient cleanup scope depth
on the stack. This happens:

* At the `;` of a statement expression.
* At the `)` of an `if` or `while` statement.
* After performing the implied `HasValue()` call in a `for` statement.

Per informal agreement with leads, this means we lifetime-extend all
temporaries created in the initializer of a name-binding declaration to
the full scope of that declaration, but that temporaries created in an
expression statement are destroyed at the `;`.
2026-07-16 15:12:39 +00:00
Richard SmithandGeoff Romer 6e62a7d4a2 Destroy locals at the end of blocks, not only on return (#7448)
Destroy local variables and temporaries at each `}`, and when branching
with `break` and `continue`. In `for` statements, destroy loop variables
along with anything created within the loop at the end of each loop
iteration, and destroy the cursor and range object when the loop
terminates.

Assisted-by: Gemini via Antigravity

---------

Co-authored-by: Geoff Romer <gromer@google.com>
2026-07-14 00:59:22 +00:00
Richard Smith a8afc45ed5 Omit empty observe: blocks from formatted SemIR. (#7487)
Also add SemIR ranges to observe test, removing 5K lines of
uninteresting SemIR output.
2026-07-13 20:38:19 +00:00
Chandler Carruth 8be274cf60 Replace :! binding syntax with phase keywords and contextual defaults (#7479)
Implement the toolchain side of proposal #7254, removing the `:!`
binding
syntax for generic and template parameters in favor of the keywords
`generic`,
`template`, and `runtime` plus contextual defaults for phase.

For valid programs this is semantics-preserving: each binding resolves
to the
same phase, and produces the same SemIR, as it did under `:!`/`:`. The
parser
derives a binding's phase from its syntactic context plus any explicit
phase
keyword; new diagnostics and error recovery for misused keywords are
described
below.

Implementation details for each component:

- Lexer: remove the `:!` (`ColonExclaim`) token, move its virtual
parse-node
  budget onto `:`, and add the `generic` and `runtime` keywords.
- Parser: thread a `BindingContext` (`ExplicitParam`, `DeducedParam`, or
`CompileTimeEntityParam`) from declaration introducers down through
parameter
lists to each binding pattern, using a one-token lookahead to
distinguish a
name-qualifier parameter list from a declaration's own final list.
Parameters
of a compile-time entity (`class`, `interface`, `constraint`, `choice`,
`alias`, `export`, `namespace`) and deduced `[]` parameters default to
checked
generic; explicit function parameters and local bindings default to
runtime.
`HandleBindingPattern` resolves the phase from that context plus the
keyword: a
`generic` keyword needs no node of its own (the phase is carried by the
  binding's node kind), while a `runtime` keyword is preserved as a
`RuntimeBindingName` node so `check` can name it in a diagnostic. A
phase
keyword that is merely redundant with the contextual default is
diagnosed
  here, without invalidating the parse tree.
- Check: a phase keyword that is invalid for its context (for example
`runtime`
on a checked-generic parameter) is diagnosed here, and recovers by
building an
error binding that still introduces the name so that later uses of it do
not
  produce cascading errors.

The removed `:!` syntax is now rejected as an ordinary parse error.

The `form`/`:?`/`->?` ("extended types") portion of proposal #7254 is
left for a
separate change.

Assisted-by: Claude Code
2026-07-11 01:22:44 +00:00
Özgür T. ÖnsoyandDana Jansens 08385adeb5 Implement checking observe declarations (#6709)
This adds SemIR structs and implements building `observe` lists, as well
as naming, formatting, and importing `observe` declarations.

---------

Co-authored-by: Dana Jansens <danakj@orodu.net>
2026-07-08 17:07:10 +00:00
Geoff Romer 8945305dfc Emit NameBindingDecl after the initializer (if any) (#7467)
In some cases the pattern block can depend on the initializer, so it
must be sequenced after it. See #7469 for a more detailed explanation of
why this is necessary.
2026-07-07 19:18:33 +00:00
Geoff Romer 0460f6b7ba Label VarStorage as var_storage instead of var (#7447)
This makes the textual format clearer and more self-explanatory, and
avoids ambiguity about whether this inst refers to the storage or the
pattern.
2026-07-02 01:02:19 +00:00
Geoff Romer e4b0903d2e Remove ValueBinding and RefBinding (#7427)
These inst kinds are now redundant with `WrapperBinding`.
2026-06-29 17:41:23 +00:00
Geoff Romer 1a3966d2c4 Build VarStorage insts more efficiently. (#7422)
Instead of traversing the entire pattern block looking for
`VarPattern`s, we keep track of them on creation, and then build
`VarStorage`s directly from that list.

This also gets rid of the global `var_storage_map`, and instead keep
that information narrowly scoped to each full-pattern, and consume it in
a single linear traversal instead of with random-access lookups. To
enable that, this fixes a parse bug where nested `var` patterns were
getting diagnosed but not marked as errors.
2026-06-26 22:26:13 +00:00
Geoff RomerandRichard Smith e023f75254 Implement thunking in terms of constant evaluation (#7332)
The bulk of this change is changing most pattern insts to be `Always`
rather than `AlwaysUnique` constants, so that they can be wrapped in
`SpecificConstant`s to perform substitution. That then lets thunking
rely much more on `SpecificConstant` wrappers instead of deep-copying
the inst tree with modified types.

This approach to thunking should scale better, particularly as things
like form generics make function signatures more complex, because we can
leverage the existing support for constant evaluation and substitution.
Unfortunately, applying this approach to binding patterns will require
more work; see the TODO near the top of `thunk.cpp` for details.

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2026-06-13 00:22:00 +00:00
Chandler Carruthandjosh11b 7871237c15 Move self to the explicit () parameter list (proposal #7016) (#7272)
Implements proposal #7016: `self` moves from the deduced implicit list
(`fn F[self: Self]()`) to the front of the explicit list. Its type may
be written explicitly (`fn F(self: Self)`) or omitted, in which case it
defaults to `Self` (`fn F(self)`, `fn F(ref self)`); `self` in the
implicit list is rejected.

Throughout checking, `self` is modeled as the first explicit parameter.
Because a method is just a function whose first parameter is `self`, it
can also be called as an ordinary function with the receiver passed
explicitly (`Type.M(obj, ...)`), not only as `obj.M(...)`. A new
`SemIR::CallArgParamPatterns` helper chooses the parameters matched
against the explicit arguments, excluding a leading `self` only when it
is supplied as a method-call receiver; arity checking, conversion, and
generic deduction use it. The resulting SemIR and lowering are
unchanged: `self` is still `call_param0`, and witnesses, thunks, and
vtables are unaffected.

An omitted `self` type is parsed as a `SelfBindingPattern` node with no
type expression; checking synthesizes the `Self` type so it behaves
exactly like `self: Self`. However, the exact spelling used must match
between a forward declaration and a definition, following #3763's rules
around declaration matching.

Generated functions, thunks, and C++ interop import/export build `self`
as the first explicit parameter, and the `self`-type override (e.g.
Derived->Base for a virtual override) applies to the explicit `self`.
Placement is validated by new diagnostics: `SelfInImplicitParamList`,
`SelfNotFirstParam`, and `SelfOutsideParamList`. The benchmark source
generator and the documentation adopt the `(self)` shorthand; the
prelude, the examples, and the test data are migrated in the following
commits.

Assisted-by: Claude Code with Claude Opus 4.7

---------

Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
2026-06-10 15:30:43 +00:00
Richard Smith cefa0397bb More fixes to package and library fingerprinting. (#7297)
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.

Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.

Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
2026-06-04 17:41:46 +00:00
Richard Smith f5e9c61f11 Don't include the library name in most fingerprints. (#7292)
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
2026-06-02 19:31:30 +00:00
Richard Smith 05cc09daca Fix cross-package signature mismatches. (#7232)
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.

Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.

Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
2026-05-21 00:02:29 +00:00
Richard Smith 341901e337 Fix crash if an inst in a pending block needs a cleanup. (#7166)
Insert the cleanup if and when the pending block is inserted, not
eagerly. And if the pending block is inserted by overwriting an existing
instruction, create a cleanup for that instruction rather than for the
instruction in the pending block that we are discarding.

Assisted-by: Gemini via Antigravity
2026-05-04 21:50:13 +00:00
Dana Jansens f8dd4d85bf Do not treat impls in different scopes as redeclarations (#7161)
An impl in a different scope, with the same parameters, will overlap and
get diagnosed for that later by the [prioritization
rule](https://docs.carbon-lang.dev/docs/design/generics/details.html#prioritization-rule),
if they are not in a match_first block. But they are not considered as
redeclarations.

See [proposal
p5366](https://github.com/carbon-language/carbon-lang/blob/62b94f79322039acc3fc8e175896a64a32df470e/proposals/p5366.md)
for the rule.
2026-05-04 19:11:51 +00:00
Richard Smith 23339bc810 Fix initialization of var parameters. (#7023)
When an initializing expression is used to initialize a var parameter,
we need to create the storage earlier in SemIR than the initializing
expression. To do so, pass a pending block to initialization containing
the var storage.

Also stop using `temporary` for this purpose, since we treat temporaries
as potentially-constant and immutable, but `var` parameters can be
mutated by the callee. We should ideally introduce a new kind of
instruction for this purpose but for now we just use `var_storage`.
2026-04-28 20:10:13 +00:00
Richard Smith 8e0d856725 Improve InPlaceInitializing conversion. (#7021)
Fix some situations where we'd drop the storage argument when building
an in-place initializing expression. We now guarantee that an expression
with the in-place initializing category always has a storage argument.
2026-04-03 21:28:54 +00:00
Jon Ross-Perkinsandjonmeow 9266ced4e3 Improve CanDestroyType to handle remaining cases (#6943)
This is only fixing the decision about *whether* to produce a witness.
Implementation of the witness is still a TODO, though where a body is
generated, it should also precisely reflect where one _needs_ to be
generated.

Note the tests:

- toolchain/lower/testdata/function/generic/import_core_witness.carbon
- toolchain/lower/testdata/function/generic/import_unused_def.carbon

These tests can probably be produced _without_ Core.Destroy, but I found
the essence of them while trying to build //examples with Core.Destroy
and a simpler minimization wasn't striking me.

Assisted-by: Google Antigravity with Gemini

---------

Co-authored-by: jonmeow <jperkins@google.com>
2026-04-02 22:54:58 +00:00
Nicholas Bishop bf6a14ac39 Support Temporary constants (#6983)
Evaluate `Temporary` constants to a `Temporary` with the `storage` field
set to `None`.
2026-03-30 19:07:46 +00:00
Geoff Romer 18f87e4f79 Include the type in the location of binding insts (#6963) 2026-03-26 18:43:29 +00:00
Richard Smith 37b238fa28 Make C++ types impl Core.Default. (#6962)
C++ classes that are default-constructible now implement `Core.Default`
by calling the default constructor.
2026-03-25 21:07:24 +00:00
Geoff Romer e0c6800ab3 Reverse nesting structure of parameter patterns (#6930)
See
[here](https://docs.google.com/document/d/1rWcueFwIfZox6GKVGxiUG4cBzjrZ6djXiIDGyJDtrE4/edit?tab=t.0#heading=h.7mi143mdhr2h)
for an overview of the changes and their rationale.

Assisted-by: Gemini 3.1 Pro via Antigravity
2026-03-23 20:38:20 +00:00
Richard SmithandGeoff Romer ce50f181f1 Add an interface for initialization of vars without an explicit initializer (#6934)
When a `var` is not explicitly given an initializer, initialize it in
one of two ways:

* If its type implements the new interface `Core.Default`, call
`Core.Default.Op` to initialize it.
* Otherwise, if its type implements `UnformedInit`, leave it in an
unformed state. For now, this is always an uninitialized state, but that
will change in the future.
* If neither of those apply, the `var` declaration is ill-formed.

This is a step towards implementing leads decision #6739 and proposals
#257 and #5913.

Assisted-by: Gemini 3.1 Pro via Antigravity

---------

Co-authored-by: Geoff Romer <gromer@google.com>
2026-03-19 23:46:06 +00:00
Geoff RomerandDavid Blaikie 2e155567bd Disallow :? within var (#6812)
Co-authored-by: David Blaikie <dblaikie@gmail.com>
2026-03-06 21:08:22 +00:00
21291b4cc3 Remove InitForm::index (#6817)
This ensures that equal forms always have equal representations (because
the index depends on how the form is used, not on the value of the form
itself).

As a byproduct, also remove `NextCallParamIndex`.

---------

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Nicholas Bishop <nicholasbishop@google.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: Boaz Brickner <brickner@google.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Co-authored-by: MK4070 <60286678+MK4070@users.noreply.github.com>
Co-authored-by: Christopher Di Bella <cjdb@google.com>
2026-03-06 17:35:48 +00:00
Geoff RomerandJon Ross-Perkins 6dba8ee111 Remove index fields from ParamPatterns (#6815)
This is a step toward removing the index from `InitForm`, so that equal
form values always have equal representations.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2026-03-03 00:19:47 +00:00
Jon Ross-Perkins b14015602b Make Destroy.Op functions able to have a body (#6729)
This is iterating on how `Destroy.Op` generates, to start adding body
capabilities. This changes the way the signature is created, and adds a
`CoreWitness` function kind so that mangling can prevent name
collisions. The result is that what _was_ `DestroyOp` is now
`Core.Destroy.Op` or, as can be seen in
toolchain/lower/testdata/interop/cpp/nullptr.carbon,
`_COp.<hash>:core.Destroy.Core` where `:core` is indicating that it's a
core witness (taking a note from `:thunk`).

Assisted-by: Google Antigravity with Gemini 3 Flash
2026-03-02 17:57:31 +00:00
Dana Jansens cea52ad2d8 Format the InterfaceWithSelf and NamedConstraintWithSelf generic name with its ".WithSelf" suffix (#6798)
We used the ".WithSelf" suffix when formatting a parent scope, but
missed the suffix when formatting the scope name on its own.
2026-02-27 13:50:56 +00:00
Dana Jansens fbc8d59d32 Introduce Diagnostics::ContextScope and remove diagnoser callbacks in type completion (#6761)
Introduces `Context` and `SoftContext` messages, which can be introduced
through a `ContextBuilder`:
- The `Context` messages come before the diagnostic in the output.
- The first `Context` message steals the diagnostic level from the main
diagnostic, and turns the main diagnostic into a Note attached to the
context.
- A `SoftContext` message works similarly, but if it's preceeded by a
`Context` or `SoftContext` message, then it is dropped. This can be used
as a default/backup scope when nothing more interesting is provided up
the stack, such as in `TryEvalBlockForSpecific`.

The `ContextBuilder` is provided to a callback through
`Diagnostics::ContextScope`, an RAII type `AnnotationScope` but for
context messages.

This allows a high level operation to provide a context message like
"failed to identify facet type {0}" which will then be used as the error
if a diagnostic is produced during identification, with the latter
diagnostic attached as a note to explain why the contextual operation
failed.

In particular, this allows monomorphization errors (such as an array
bound being negative) to be attached to a higher lever operation instead
of being top-level diagnostics themselves, with the monomorphization
site being a note. This inverts the source code locations that appear in
the diagnostic, so that the top-level diagnostic points to the "user
code" which causes the monomorphization.

This is presented as an alternative strategy to #6753, which plumbed
diagnoser callbacks around to achieve the same goals.

We replace the diagnoser callbacks in type completion and operators with
ContextScope callbacks instead, which now provide better diagnostics for
monomorphization errors. Other callers to MakeSpecific do not yet have
ContextScopes introduced in order to turn monomorphization errors into
more interesting diagnostics.
2026-02-25 15:15:29 +00:00
Jon Ross-Perkins e2bdbe8507 Make semir scope labels only print when non-empty (#6780)
This shifts logic a little so that empty top-level scopes are printed
less often. This affects imports mainly for now, but should be expected
to affect the soon-to-be-added generated scope more significantly.

Assisted-by: Google Antigravity with Gemini 3 Flash
2026-02-25 00:28:59 +00:00
fdb188ccfd Implement unused pattern bindings, continued (#6518)
Implementation of unused pattern bindings #2022, continued.

Whereas previous PR #6460 took care of parsing, and PR #6479 prepared
the stage by using _ in some test cases, this PR has the the actual
implementation, using a simple dataflow analysis.

---------

Co-authored-by: Burak Emir <bqe@google.com>
Co-authored-by: jonmeow <jperkins@google.com>
2026-02-19 23:33:36 +00:00
Dana Jansens 917a6ea971 Add an interface-with-self generic to each interface and same for constraints (#6667)
Currently each interface has a `Self` facet internally that becomes a
binding to every entity inside the interface: associated constants,
functions, and require decls. Each of these has to be independently
generic as a result. This makes is challenging in extended name lookup
to move into an extended scope of an interface, as we have a specific
for the interface, but the names within require a different specific
that includes a `Self` facet value.

We generalize this relationship by adding a second generic to Interface,
called `generic_with_self`. When we want to work with entities inside
the interface, we move from the interface-without-specific to the
interface-with-self specific by adding a Self to the specific. This is
done independently of any particular entity inside the Interface, as
those entities are now all members of the interface-with-self generic.

Associated constants no longer need a generic of their own, as they do
not have separate generic bindings. Functions retain a generic, but if
the function has no generic arguments, it will have no bindings of its
own now.

Require decls retain a generic so that their specific can be
instantiated separately from the interface. Requiring the interface to
be complete does not require the types in a require decl to be complete
unless it is modified by `extend`. So we allow them to be completed
later by keeping them in a separate generic.

Named constraints look like interfaces and gain the additional inner
generic-with-self, with the same relationship to require decls.

This removes the need for name lookup to perform Substitution of a Self
facet into the extended scope instruction. Instead, the
`SpecificConstant` instruction inserted by a `require` decl is part of
the interface-with-self generic. When looking through a FacetType for
extended scopes, for each interface, we push the scope with the specific
for the interface-with-self. Then the constant value of the
`SpecificConstant` is correctly modified by the provided self
automatically through applying that specific.
2026-02-19 16:24:07 +00:00
Geoff Romer 3c324e4877 Add category to parameter format, and share some code. (#6730) 2026-02-13 22:20:05 +00:00
Geoff Romer 1c885a629e Format FormType as "Core.Form" (#6734) 2026-02-13 19:44:21 +00:00