There were a number of iterations on the design that weren't reflected
in the initial port to the terminal rendering library. This PR tries to
complete the rendering side of things to match the design we landed on:
code-focused, with messages attached by lines to the code, and condensed
as much as possible to avoid the vertical space.
It also improves the styling to make things more visually
distinguishable such as adding a `->` to the main error line, and making
the underlines and connectors for it have a heavy weight (when the font
supports that).
Another major change is having multiple messages on a single line be
drawn in source lexical order. This requires the connectors to cross
without joining, but makes it easier to read the messages.
This PR also has some refactorings to enable these improvements, and a
_number_ of improvements to comment prose and terminology to try and
avoid jargon and make things read more naturally. Sorry for the fact
that Claude left a bunch of this mannerly language in comments despite
my efforts, but I'm continuing to try and drive the prose towards
something direct and simple to read. Some of the terminology
improvements also needed to be made in the design doc and those have
been made here.
Note that I don't think this rendering is perfect or should be viewed as
final. I'm happy to iterate on it further, and have a few adjustments in
mind already, but would like to focus this on getting the
_implementation_ of the current rendering design in place, and then we
can make targeted changes or tweaks as needed. For example, I'm not yet
fully happy with the rendering when messages are too long and we move
them all the way to the left, but am leaving that for a follow-up.
Assisted-by: Claude Code
Determining that a type has trivial destruction requires checking
whether all of its subobjects have trivial destruction and whether its
type has a custom witness for `Destroy.Op`. This isn't possible when
`Destroy` is the custodian for `Destroy.Op` and `SubobjectDestroy.Op`,
so we need to make `SubobjectDestroy` its own interface.
`Destroy.SelfDestruct` becomes a standalone function because it depends
on `SubobjectDestroy` and `Destroy` being implemented, and is also
responsible for generating any custom witnesses for both interfaces.
Making `SelfDestruct` an interface was experimented with, but this
required a blanket impl that caused issues for facet types.
`Destroy` depends on `SubobjectDestroy` to be implemented. We'd ideally
use `require impls SubobjectDestroy`, but it isn't complete yet, and it
also causes problems when `Destroy` is implemented inside the class
definition. We work around this by temporarily renaming the `Destroy`
interface to `DestroyImpl`, and introducing a constraint called
`Destroy` so that user code doesn't need to write `Core.SubobjectDestroy
& Core.Destroy`.
Diagnostic rendering was part of the data model: `Loc::FormatLocation`
and
`Loc::FormatSnippet` wrote plain text to a stream, so no capability,
color, or
terminal width could reach them.
A diagnostic is now one message with labels, contexts, and location
information
attached, and `Diagnostics::Renderer` draws it into a
`Terminal::Buffer`. The
design is in `toolchain/docs/diagnostics_rendering.md` (#7668),
authoring in
`toolchain/docs/diagnostics.md`.
Before:
```
example.carbon:6:3: error: 1 argument passed to function expecting 0 arguments
Run0(1);
^~~~~~~
example.carbon:3:1: note: calling function declared here
fn Run0() {}
^~~~~~~~~~~
```
After:
```
error: 1 argument passed to function expecting 0 arguments
╭─┤ example.carbon:6:3
┆
3 │ fn Run0() {}
· ─────┬─────
· ╰──┤ calling function declared here
┆
-> 6 │ Run0(1);
· ───────
╰────────────
```
`--no-diagnostic-snippets` gives a compact form, `example.carbon:6:3-9`.
File
tests use it; the rendering tests under `toolchain/diagnostics/testdata`
ask for
snippets.
C++ interop diagnostics are data now rather than text Clang drew:
`SemIR::ClangSourceLocId` names a `clang::SourceRange`, and a Clang
location is
marked as the point it names.
`StreamConsumer` moves to a `:renderer` target that `:emitter` does not
depend
on, keeping `common/terminal` out of `consumer.h`. Capabilities come
from the
file behind the error stream, so tests get plain ASCII.
`renderer_fuzzer` draws diagnostics built from fuzzer bytes with every
capability combination, since a shape the renderer doesn't expect must
never be
why the compiler dies while reporting a problem.
TODOs mark the follow-ups: line weights and crossing lines, wrapping
that keeps
a quoted type whole, and ordering diagnostics that share a byte offset.
Also: `IncorrectExtension`'s hint moves into its message, since its note
had no
location of its own, and `strip_noise` in `check_diagnostics.py` blanks
multi-line `#define`s instead of deleting them.
Assisted-by: Claude Code
When identifying a facet type, defer evaluation of LookupImplWitnesses
by redirecting them to evaluate into IdentifiedWitness. Then the caller
of identify will need to substitute the IdentifiedWitnesses, either with
witnesses of their own, or with LookupImplWitness to cause a lookup
operation.
This allows:
- An `impl as` on a named constraint can subst the witnesses in
designators from the named constraint with a witness to the impl itself.
This prevents them from looking for and finding some other overlapping
impl. (This PR)
- Impl lookup to collect rewrite/equality requirements from all named
constraints and then use the impls it has already found to evaluate any
designators in those requirements instead of performing impl lookup
again (creating a cycle). (Done in
https://github.com/carbon-language/carbon-lang/pull/7944)
- Similarly, an `impl as` can collect impls and equality requirements
from all named constraints and verify them correctly by replacing
witnesses that should refer to the impl with the correct witness instead
of performing a lookup and finding an overlapping impl. (Done in
https://github.com/carbon-language/carbon-lang/pull/7937)
- ImplWitnessAccess to be able to find rewrites from a named constraint,
not just from the initial DeclaredFacetType. (TBD)
To do this we need to introduce the concept of "identified" specifics.
In order to identify a facet type, we must construct a specific for each
require decl in a named constraint. These specifics will have
IdentifiedWitnesses inside them, but their args would otherwise match a
specific for the require decl constructed in another context. To avoid
polluting the canonical specific namespace, we introduce a second
namespace of specifics that are "identified" since they are created by
identifying.
As we have introduced a new global state that modifies eval behaviour,
we must disable that state when resolving a specific (as per
https://github.com/carbon-language/carbon-lang/pull/7923). But inside an
"identified" specific, we preserve the behaviour so that the witnesses
modified by identify (through SubstPeriodSelf or through evaluating a
require specific) have their evaluation deferred.
This change partially implements [PR #7362], which revises how objects
are destroyed. It is a partial implementation for two reasons:
1. This change moves `Destroy.Op`'s current behaviour into
`Destroy.SubobjectDestroy`, but it doesn't add support for objects with
non-trivial destruction.
2. `Destroy.SubobjectDestroy` is a workaround for `require impls
SubobjectDestroy`. We aren't able to use the latter until the dependents
add their requirements' implementations to their own witness tables.
[PR #7362]: https://github.com/carbon-language/carbon-lang/pulls/7362
The type `type` is now a `FacetType` inst with no constraints. This
brings the model implemented in the toolchain into better alignment with
the language design. The `SemIR::TypeType` struct remains as a scope for
holding the `TypeInstId`, `ConstantId`, and `TypeId` constants, but is
not an `InstKind` anymore.
The `TypeType` inst looks a lot like singletons, but there are many
`FacetType` insts so it doesn't quite fit that model. So we put it
alongside singletons with a fixed inst id but refer to it as a more
general "builtin" inst that is not a singleton.
`Namespace::PackageInstId` is similar, and we group it with `TypeType`
conceptually as another builtin instruction with a fixed id.
No conversion is needed anymore to use a `type` as a facet, since types
also have a `FacetType` type. This simplifies and removes a number of
helpers and branches throughout the code.
The `TypeType` inst is now part of the constant store, so we end up
printing it in the constants block in every test. But it's also named
`type` rather than `%type` to preserve the majority of existing
formatting behaviour, though this does look different from other
constants.
Assisted-by: Opus 5 was used to generate a first draft and validate the
refactoring. Though nearly everything non-trivial the tool wrote has
been modified or rewritten.
Use a single `SemIR::Function` per `Core` interface method, whether it's
generated locally or imported. This prevents generating duplicate
functions, which lead to different types when the witness appears in a
`FacetValue` as part of a specific for a class.
We use a `CanonicalValueStore` of `GeneratedFunction` objects that allow
finding an existing FunctionId for a `Generated` special function before
(re-)generating it. Mangling for `Generated` functions is also moved to
use the values from the `GeneratedFunction`'s canonicalization key, so
that we have a consistent source of truth for the unique ID of a
`Generated` function across all files.
New tests are in
`toolchain/check/testdata/impl/custom_witness/destroy.carbon`.
This adds most support for default and final methods. Missing components
include rejecting definitions for non-default/final methods, and
permitting out-of-line definitions.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Chandler Carruth
Christopher Di Bella
Dana Jansens
Geoff Romer
