When impl lookup results in an `ImplWitness`, either directly or later
through `LookupImplWitness` evaluating to an `ImplWitness` inside some
specific, it represents a dependency on the eval blocks of the
`ImplDecl` that the `ImplWitness` comes from. The `ImplWitness` contains
a `SpecificId` of the `ImplDecl`, and the constants in the witness table
must be viewed through that `SpecificId`. The constants may depend on
the declaration or the definition block of the `ImplDecl`'s specific, so
any use of the witness table from `ImplWitness` requires the specific
from the `ImplWitness` to be fully resolved: both the decl and
definition blocks.
The specific declaration block is always resolved immediately when
forming a specific id, so there's nothing to do there. And things are
simple when the `ImplWitness` returned from impl lookup is concrete. We
would simply resolve the specific definition directly in the evaluation
of `LookupImplWitness`.
But when the `ImplWitness` is symbolic, meaning there's a dependency on
generic parameters in its referenced specific, then we have a dependency
on resolving the specific definition in the `ImplWitness` for every
specific that gets applied to the `ImplWitness`, eventually resulting in
a concrete specific.
Previously we attempted to do this by representing a dependency edge
from the eval block containing the `ImplWitness` instruction to the
definition block of the specific inside the `ImplWitness`. We
represented this dependency edge with the `RequireSpecificDefinition`
instruction.
The challenge with the `RequireSpecificDefinition` instruction was
ensuring it always landed in the _same eval block_ as the one holding
the symbolic `ImplWitness`. Ultimately, we've found a way to do this
without the `RequireSpecificDefinition`. The witness table is accessed
through `ImplWitnessAccess`, so we resolve the specific definition
before each access to the witness table. If the definition is already
resolved, this just costs a lookup of the Specific from the value store.
We document the other things we tried, which don't work or were too
complex, below.
In PR #6236, we added the `RequireSpecificDefinition` instruction in the
eval of `LookupImplWitness`, but this is too late. If impl lookup
resolved to a symbolic `LookupImplWitness`, the `LookupImplWitness` is
added some eval block. Later, we form specifics and re-evaluate that
eval block, and the `LookupImplWitness` can evaluate to an
`ImplWitness`. Adding the `RequireSpecificDefinition` instruction at
this point inserts the instruction into whatever generic's eval block
happens to be on the top of the generic stack, not the eval block of the
generic we are building a specific for. And indeed we can't add
instructions to a generic's eval block later like this, as it would be
missing from specifics that were already resolved for the generic. This
incorrect insertion shows up as a crash in eval at the CHECK introduced
but commented out in [eval.cpp in
#7981](https://github.com/carbon-language/carbon-lang/blob/56d9bbc40add1e9263f2f9b2555c3a27292d1725/toolchain/check/eval.cpp#L3507-L3512).
This is covered by the
`require_specific_impl_definition_through_specific_instantiation.carbon`
test.
We tried moving the insertion of `RequireSpecificDefinition` to be
earlier - at the point where the `LookupImplWitness` is constructed, in
the `LookupImplWitness()` function, instead of inside evaluation. This
seemed like a straightforwardly correct answer, as the eval block that
contains the `LookupImplWitness` will then also contain the
`RequireSpecificDefinition`. However, this can cause us to lose the
`RequireSpecificDefinition` entirely. Because it's a separate
instruction, not an operand of `LookupImplWitness`, it does not get
treated as a dependency of the witness. When we do an impl lookup inside
an `alias`, we build a generic for the alias and then discard it. This
discards the eval block containing the `LookupImplWitness`. Then, in an
enclosing generic, we refer to the constructed `AliasDecl` instruction,
which pulls all its dependent operands into the enclosing eval block.
This pulls in the `LookupImplWitness` into the enclosing eval block, but
it does not preserve the `RequireSpecificDefinition`. This is covered by
the
`require_specific_impl_definition_from_lookup_impl_witness_in_class_definition.carbon`
test.
We tried having `ImplWitness` evaluation resolve the specific definition
of the specific `ImplDecl` it refers to. This seems like the simplest
approach by far as we should always be working with the correct eval
block and nothing can get lost. However it does not work because of the
recursive nature of `ImplWitness`. The `ImplWitness` instruction appears
in the declaration of an `ImplDecl`, and the `ImplWitness` holds a
`SpecificId` for that same `ImplDecl`. When building a specific
`ImplDecl`, we evaluate the `ImplWitness` in the `ImplDecl`'s
declaration block which then immediately resolves the specific
definition before the declaration is finished. This leads to missing
instructions in the specific definition. In short, this puts the
dependency edge to the `ImplDecl`'s specific inside the `ImplDecl`
itself, which is problematic.
We tried wrapping `ImplWitness` in another instruction,
`ImplWitnessUse`. Inside the `ImplDecl` declaration there is still
`ImplWitness`, but then in the definition there is `ImplWitnessUse` and
that is what is returned from the evaluation of `LookupImplWitness`. The
`ImplWitnessUse` is an `ImplWitness` plus it ensures the specific
referred to by the witness has its definition resolved. However this
breaks constant comparisons, as we get different witnesses inside an
impl versus outside.
The first iteration of this PR's solution had us insert the
`RequireSpecificDefinition` into the eval block when we sniffed a
`LookupImplWitness` instruction, however that missed cases where impl
lookup immediately resolved to a symbolic `ImplWitness`, which is why we
now sniff for the `ImplWitness` in the eval block. This is covered by
the
`require_specific_impl_definition_from_symbolic_impl_in_class_definition.carbon`
test.
We also originally made a mistake of not inserting
`RequireSpecificDefinition` when inside the impl definition that the
`ImplWitness` refers to. But we can form specifics ImplWitness values
through function signatures, and these must add the dependency edge on
that specific ImplDecl definition. This is covered by the
`require_specific_impl_definition_from_inside_impl_definition.carbon`
test.
Finally, we did have a working solution. It was to sniff instructions
added to the eval block of a generic, and when an `ImplWitness` is added
to the eval block (it is implied that it is symbolic), also add a
`RequireSpecificDefinition` to that eval block immediately. We also
resolved the definition of a specific referred to by `ImplWitness` when
`LookupImplWitness` evaluates to `ImplWitness` to cover the concrete
witness case. This complicated the construction of the eval block
immensely, however. It caused a situation where adding one inst to the
eval block actually adds two, which we needed to avoid when importing.
And it required inst-kind specific behaviour in the very general
construction of an eval block, completely outside of eval itself.
Determining that a type has trivial destruction requires checking
whether all of its subobjects have trivial destruction and whether its
type has a custom witness for `Destroy.Op`. This isn't possible when
`Destroy` is the custodian for `Destroy.Op` and `SubobjectDestroy.Op`,
so we need to make `SubobjectDestroy` its own interface.
`Destroy.SelfDestruct` becomes a standalone function because it depends
on `SubobjectDestroy` and `Destroy` being implemented, and is also
responsible for generating any custom witnesses for both interfaces.
Making `SelfDestruct` an interface was experimented with, but this
required a blanket impl that caused issues for facet types.
`Destroy` depends on `SubobjectDestroy` to be implemented. We'd ideally
use `require impls SubobjectDestroy`, but it isn't complete yet, and it
also causes problems when `Destroy` is implemented inside the class
definition. We work around this by temporarily renaming the `Destroy`
interface to `DestroyImpl`, and introducing a constraint called
`Destroy` so that user code doesn't need to write `Core.SubobjectDestroy
& Core.Destroy`.
Diagnostic rendering was part of the data model: `Loc::FormatLocation`
and
`Loc::FormatSnippet` wrote plain text to a stream, so no capability,
color, or
terminal width could reach them.
A diagnostic is now one message with labels, contexts, and location
information
attached, and `Diagnostics::Renderer` draws it into a
`Terminal::Buffer`. The
design is in `toolchain/docs/diagnostics_rendering.md` (#7668),
authoring in
`toolchain/docs/diagnostics.md`.
Before:
```
example.carbon:6:3: error: 1 argument passed to function expecting 0 arguments
Run0(1);
^~~~~~~
example.carbon:3:1: note: calling function declared here
fn Run0() {}
^~~~~~~~~~~
```
After:
```
error: 1 argument passed to function expecting 0 arguments
╭─┤ example.carbon:6:3
┆
3 │ fn Run0() {}
· ─────┬─────
· ╰──┤ calling function declared here
┆
-> 6 │ Run0(1);
· ───────
╰────────────
```
`--no-diagnostic-snippets` gives a compact form, `example.carbon:6:3-9`.
File
tests use it; the rendering tests under `toolchain/diagnostics/testdata`
ask for
snippets.
C++ interop diagnostics are data now rather than text Clang drew:
`SemIR::ClangSourceLocId` names a `clang::SourceRange`, and a Clang
location is
marked as the point it names.
`StreamConsumer` moves to a `:renderer` target that `:emitter` does not
depend
on, keeping `common/terminal` out of `consumer.h`. Capabilities come
from the
file behind the error stream, so tests get plain ASCII.
`renderer_fuzzer` draws diagnostics built from fuzzer bytes with every
capability combination, since a shape the renderer doesn't expect must
never be
why the compiler dies while reporting a problem.
TODOs mark the follow-ups: line weights and crossing lines, wrapping
that keeps
a quoted type whole, and ordering diagnostics that share a byte offset.
Also: `IncorrectExtension`'s hint moves into its message, since its note
had no
location of its own, and `strip_noise` in `check_diagnostics.py` blanks
multi-line `#define`s instead of deleting them.
Assisted-by: Claude Code
When identifying a facet type, defer evaluation of LookupImplWitnesses
by redirecting them to evaluate into IdentifiedWitness. Then the caller
of identify will need to substitute the IdentifiedWitnesses, either with
witnesses of their own, or with LookupImplWitness to cause a lookup
operation.
This allows:
- An `impl as` on a named constraint can subst the witnesses in
designators from the named constraint with a witness to the impl itself.
This prevents them from looking for and finding some other overlapping
impl. (This PR)
- Impl lookup to collect rewrite/equality requirements from all named
constraints and then use the impls it has already found to evaluate any
designators in those requirements instead of performing impl lookup
again (creating a cycle). (Done in
https://github.com/carbon-language/carbon-lang/pull/7944)
- Similarly, an `impl as` can collect impls and equality requirements
from all named constraints and verify them correctly by replacing
witnesses that should refer to the impl with the correct witness instead
of performing a lookup and finding an overlapping impl. (Done in
https://github.com/carbon-language/carbon-lang/pull/7937)
- ImplWitnessAccess to be able to find rewrites from a named constraint,
not just from the initial DeclaredFacetType. (TBD)
To do this we need to introduce the concept of "identified" specifics.
In order to identify a facet type, we must construct a specific for each
require decl in a named constraint. These specifics will have
IdentifiedWitnesses inside them, but their args would otherwise match a
specific for the require decl constructed in another context. To avoid
polluting the canonical specific namespace, we introduce a second
namespace of specifics that are "identified" since they are created by
identifying.
As we have introduced a new global state that modifies eval behaviour,
we must disable that state when resolving a specific (as per
https://github.com/carbon-language/carbon-lang/pull/7923). But inside an
"identified" specific, we preserve the behaviour so that the witnesses
modified by identify (through SubstPeriodSelf or through evaluating a
require specific) have their evaluation deferred.
Calls to functions with a `ref` or `val` return form whose type might be
initialized in place (such as a class type) were given temporary return
storage, based only on the return type. Caller pattern matching then
matched that storage against the callee's `ref_return_pattern` or
`value_return_pattern`, which only supports the callee side, and
CHECK-failed. Instead, base the decision on
`call_param_ranges.return_size()`, which is computed once from the same
return pattern when the callee's declaration is built, and assert the
same property in `ConvertCallArgs` before caller pattern matching.
Assisted-By: Claude
`BuildReturnWithExpr` handled init, ref, error, and symbolic return
forms, but hit `CARBON_FATAL("Unexpected inst kind")` for a `ValueForm`,
so a definition such as `fn F() ->? form(val i32) { return 1; }`
crashed. Convert the returned expression to a value of the form's type
component, mirroring the existing `RefForm` handling.
Removes support for unspecified default values. Fixes canonicalization
of the `DefaultValuePattern` instruction by making them immutable after
they are issued, and by removing the `DefaultValueId` operand which
wasn't being canonicalized.
Add support for deferring initialization as a template action, and
performing the deferred initialization during template instantiation.
This is substantially more complex than other conversion actions, for
two primary reasons:
* The initializer in the generic may have storage arguments as inputs.
We model an initializing expression as having a "slot" where
initialization writes the location that should be initialized by that
initializing expression, and that needs to be an output of the
initialization action.
* Initialization from a tuple or struct literal needs to recurse into
that literal, and the literal will have been spelled in the generic,
meaning we don't have an `InstId` that can be used to name the specific
version of the initializer as input for nested conversions.
These issues are addressed by introducing two new features to the action
machinery:
In addition to `InstAction`, we now have `MultiInstAction`, which is an
action that produces a tuple of instruction values instead of a single
instruction value. Initialization actions produce one instruction for
the final result, which is spliced at the point of initialization, plus
one instruction for each storage argument, which are spliced into the
storage argument slots in the original generic. During initialization,
if we find one of those splices in the storage argument of an
initializing expression, we return the new storage argument back to the
initialization action to be included in the specific, instead of
overwriting the storage argument in the generic.
Actions whose `PerforrmAction` takes a `SpecificId` as input no longer
perform automatic refinement of their operands to specific instructions.
Instead, the action is given control over when and where it performs
that refinement. In `InitializeAction`, we use this freedom to form a
`SpecificInst` for the initializer in the primary output block, and form
a `SpecificInst` for the target in the target block. When detecting
whether we are initializing from a tuple or struct literal, we step over
the `SpecificInst` and track its `SpecificId`, and if necessary create a
new `SpecificInst` wrapping the sub-initializer when we recurse into the
nested element conversion.
Assisted-by: Claude and Gemini via Antigravity
This change partially implements [PR #7362], which revises how objects
are destroyed. It is a partial implementation for two reasons:
1. This change moves `Destroy.Op`'s current behaviour into
`Destroy.SubobjectDestroy`, but it doesn't add support for objects with
non-trivial destruction.
2. `Destroy.SubobjectDestroy` is a workaround for `require impls
SubobjectDestroy`. We aren't able to use the latter until the dependents
add their requirements' implementations to their own witness tables.
[PR #7362]: https://github.com/carbon-language/carbon-lang/pulls/7362
The type `type` is now a `FacetType` inst with no constraints. This
brings the model implemented in the toolchain into better alignment with
the language design. The `SemIR::TypeType` struct remains as a scope for
holding the `TypeInstId`, `ConstantId`, and `TypeId` constants, but is
not an `InstKind` anymore.
The `TypeType` inst looks a lot like singletons, but there are many
`FacetType` insts so it doesn't quite fit that model. So we put it
alongside singletons with a fixed inst id but refer to it as a more
general "builtin" inst that is not a singleton.
`Namespace::PackageInstId` is similar, and we group it with `TypeType`
conceptually as another builtin instruction with a fixed id.
No conversion is needed anymore to use a `type` as a facet, since types
also have a `FacetType` type. This simplifies and removes a number of
helpers and branches throughout the code.
The `TypeType` inst is now part of the constant store, so we end up
printing it in the constants block in every test. But it's also named
`type` rather than `%type` to preserve the majority of existing
formatting behaviour, though this does look different from other
constants.
Assisted-by: Opus 5 was used to generate a first draft and validate the
refactoring. Though nearly everything non-trivial the tool wrote has
been modified or rewritten.
Use a single `SemIR::Function` per `Core` interface method, whether it's
generated locally or imported. This prevents generating duplicate
functions, which lead to different types when the witness appears in a
`FacetValue` as part of a specific for a class.
We use a `CanonicalValueStore` of `GeneratedFunction` objects that allow
finding an existing FunctionId for a `Generated` special function before
(re-)generating it. Mangling for `Generated` functions is also moved to
use the values from the `GeneratedFunction`'s canonicalization key, so
that we have a consistent source of truth for the unique ID of a
`Generated` function across all files.
New tests are in
`toolchain/check/testdata/impl/custom_witness/destroy.carbon`.
Treat `InstConstantKind::InstAction` the same as
`InstConstantKind::ConstInstAction`. Drop `ConstInstAction`, since the
two now behave the same.
Fix eval for specifics in a couple places to handle `InstId::None`.
Implementing interface modifiers causes an infinite loop when generating
fingerprints because the witness value generates a fingerprint that's
dependent on something dependent on the witness value. We've debugged
this to the witness table's `elements_id` field.
This hack is a workaround for creating a new block type whose value is
not codependent with its identity.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
During impl lookup, for each (generic) impl candidate, we form a
specific for that impl by deducing its generic arguments. Then we
compare the query interface against the impl's specific interface. That
comparison needs the deduced arguments applied to the impl's specific
interface. Previously we were doing this by getting the impl's
constraint facet type with the impl's specific applied (via
`GetConstantValueInSpecific()`) and then identifying that facet type
with the impl's deduced self.
Identify is a fairly expensive operation. It runs subst, trying to
replace `.Self` references. It walks named constraints. It collects
require declarations. We're looking at making it do _more_ in the future
too, including rewrite constraint resolution and collecting rewrite and
same-type constraints. For this reason we have a cache to make it cheap
on the second run, but it's still a very heavyweight operation to
involve in impl lookup, when all we want is to apply the impl's specific
to its target interface.
We almost have all the information we need to avoid the identification
step. We have the impl's specific after deduction. And we have the
SpecificInterface that the impl is targeting in the `Impl` struct. When
we form the specific for the impl itself, we resolve the declaration
block and form new constant values for all instructions in there, but
that does not cover the SpecificInterface that we're storing in the
`Impl` struct. So we add a new instruction to the impl's eval block,
which will be symbolic when the impl is generic and the target interface
depends on a generic parameter. And we store the `InstId` in the `Impl`
struct. This allows us to gets its constant value later with the impl's
specific applied. From that constant value we can then pull out the
SpecificInterface that the impl is targeting.
This is in addition to finding a `where` on the RHS of another `where`.
Since a generic binding introduces `.Self`, any `where` expression that
isn't part of a facet type modifying the binding itself would introduce
an ambiguous `.Self`.
Add virtual parse nodes for let, var, and form bindings, which goes
before the type. This allows us to track if `where` appears in the
binding's type. We only need to look for an invalid `where` if any
appeared in the type. We combine these three nodes together into a
single node kind, which requires us to remove the name from it as a
child. We move it up to the Pattern node again, and rename the
PatternStart nodes to PatternTypeStart as they are now located in the
middle of the Pattern nodes, just before the type.
And we only need to thaw `.Self` in generic bindings. Non-generic
bindings can only have `.Self` through a `where` expression, since the
name is not provided otherwise to non-generic bindings. And `where`
expressions thaw their `.Self` independently. So the binding only needs
to thaw a `.Self` that it introduced, which is only for generic
bindings.
Implement the toolchain side of proposal #7254, removing the `:!`
binding
syntax for generic and template parameters in favor of the keywords
`generic`,
`template`, and `runtime` plus contextual defaults for phase.
For valid programs this is semantics-preserving: each binding resolves
to the
same phase, and produces the same SemIR, as it did under `:!`/`:`. The
parser
derives a binding's phase from its syntactic context plus any explicit
phase
keyword; new diagnostics and error recovery for misused keywords are
described
below.
Implementation details for each component:
- Lexer: remove the `:!` (`ColonExclaim`) token, move its virtual
parse-node
budget onto `:`, and add the `generic` and `runtime` keywords.
- Parser: thread a `BindingContext` (`ExplicitParam`, `DeducedParam`, or
`CompileTimeEntityParam`) from declaration introducers down through
parameter
lists to each binding pattern, using a one-token lookahead to
distinguish a
name-qualifier parameter list from a declaration's own final list.
Parameters
of a compile-time entity (`class`, `interface`, `constraint`, `choice`,
`alias`, `export`, `namespace`) and deduced `[]` parameters default to
checked
generic; explicit function parameters and local bindings default to
runtime.
`HandleBindingPattern` resolves the phase from that context plus the
keyword: a
`generic` keyword needs no node of its own (the phase is carried by the
binding's node kind), while a `runtime` keyword is preserved as a
`RuntimeBindingName` node so `check` can name it in a diagnostic. A
phase
keyword that is merely redundant with the contextual default is
diagnosed
here, without invalidating the parse tree.
- Check: a phase keyword that is invalid for its context (for example
`runtime`
on a checked-generic parameter) is diagnosed here, and recovers by
building an
error binding that still introduces the name so that later uses of it do
not
produce cascading errors.
The removed `:!` syntax is now rejected as an ordinary parse error.
The `form`/`:?`/`->?` ("extended types") portion of proposal #7254 is
left for a
separate change.
Assisted-by: Claude Code
In #7436 we stopped substituting `.Self` when collecting witnesses out
of a facet type. While this was correct, it did not capture all the
cases that need to avoid substituting `.Self`. And it poisoned the
`IdentifiedFacetType` cache by not replacing `.Self` but storing the
result in the cache. This led to incoherent behaviour, where the result
of an impl lookup would change depending on which ones had been done
previously.
Now we use a flag to track for each `.Self` if we're currently
type-checking inside the scope where it was introduced in a facet type.
While inside that scope, identify should not replace the `.Self`. Any
use of it should remain as-is since we don't yet know what value will
replace it. We call this state "frozen" since it should not be modified
by identify. This requires a substitution step when we leave the scope
that introduced the `.Self`, to remove the flag. The flag is set in the
`EntityName` of the `SymbolicBinding`, and is part of the canonical
value, since `.Self` can become part of types, which are constants, and
the flag needs to follow it for correct behaviour.
We also have to ensure the flag is the same when doing comparison with
constants from inside a facet type and constants from outside. For
instance in `(Z where .Z1 = ()) where .Z2 = .Z1`, when we arrive at the
second `.Z1` its `.Self` will be frozen, while the `.Z1 = ()` contains a
non-frozen `.Self`. So we add the frozen flag to the first when storing
it in `where_stack` in order to compare the constant values of the two
`.Z1`.
The `WhereExpr` requirement inst kinds now have an `InstConstantKind` of
`AlwaysUnique` instead of `Never`. This allows us to add them to the
usual InstBlocks, and in an `eval fn` body they have a constant value,
so eval does not fail when trying to call that function. We have to be
careful to not consider `AlwaysUnique` as being actually concrete
though, since their constant value erases `.Self`-dependence. This
allows us to stop special casing them when thawing the requirements
block in a `WhereExpr`, and we can just thaw each `InstId` in the block
in a straightforward manner.
We add the new flag to the instruction's fingerprint and name in
formatted semir.
This adds SemIR structs and implements building `observe` lists, as well
as naming, formatting, and importing `observe` declarations.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
In some cases the pattern block can depend on the initializer, so it
must be sequenced after it. See #7469 for a more detailed explanation of
why this is necessary.
The bulk of this change is changing most pattern insts to be `Always`
rather than `AlwaysUnique` constants, so that they can be wrapped in
`SpecificConstant`s to perform substitution. That then lets thunking
rely much more on `SpecificConstant` wrappers instead of deep-copying
the inst tree with modified types.
This approach to thunking should scale better, particularly as things
like form generics make function signatures more complex, because we can
leverage the existing support for constant evaluation and substitution.
Unfortunately, applying this approach to binding patterns will require
more work; see the TODO near the top of `thunk.cpp` for details.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Implements proposal #7016: `self` moves from the deduced implicit list
(`fn F[self: Self]()`) to the front of the explicit list. Its type may
be written explicitly (`fn F(self: Self)`) or omitted, in which case it
defaults to `Self` (`fn F(self)`, `fn F(ref self)`); `self` in the
implicit list is rejected.
Throughout checking, `self` is modeled as the first explicit parameter.
Because a method is just a function whose first parameter is `self`, it
can also be called as an ordinary function with the receiver passed
explicitly (`Type.M(obj, ...)`), not only as `obj.M(...)`. A new
`SemIR::CallArgParamPatterns` helper chooses the parameters matched
against the explicit arguments, excluding a leading `self` only when it
is supplied as a method-call receiver; arity checking, conversion, and
generic deduction use it. The resulting SemIR and lowering are
unchanged: `self` is still `call_param0`, and witnesses, thunks, and
vtables are unaffected.
An omitted `self` type is parsed as a `SelfBindingPattern` node with no
type expression; checking synthesizes the `Self` type so it behaves
exactly like `self: Self`. However, the exact spelling used must match
between a forward declaration and a definition, following #3763's rules
around declaration matching.
Generated functions, thunks, and C++ interop import/export build `self`
as the first explicit parameter, and the `self`-type override (e.g.
Derived->Base for a virtual override) applies to the explicit `self`.
Placement is validated by new diagnostics: `SelfInImplicitParamList`,
`SelfNotFirstParam`, and `SelfOutsideParamList`. The benchmark source
generator and the documentation adopt the `(self)` shorthand; the
prelude, the examples, and the test data are migrated in the following
commits.
Assisted-by: Claude Code with Claude Opus 4.7
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
We exposed `Core.IntLiteral()`, `Core.FloatLiteral()`,
`Core.CharLiteral()`, and `Core.Bool()` as functions as a workaround,
because we had no way to provide the type names without parentheses that
the design requests. But now we can do so, by using an alias. Switch all
of these over from being functions to simply being names of the
corresponding types.
Assisted-by: Gemini via Antigravity
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.
Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.
Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
Allow a `ref`-tagged expression to be converted to match a reference
parameter. Move the `ref` checks to the start of `Convert`. Remove the
diagnostic for applying `ref` to a non-reference expression so that
non-reference expressions that convert to a reference would be accepted
(although we don't currently have any such conversions).
Assisted-by: Gemini via Antigravity
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
Implement the alias rules from proposal #5389, wherein an alias is
permitted so long as the target has a constant value. While that
proposal is not yet accepted, this seems like a reasonable basis for
further iteration, and will be useful for the examples we're currently
pursuing.
This lets us stop eliding it in textual semir tests with dump ranges.
Previously it would always get elided, even though it was part of the
range being dumped, and was referred to by other instructions in the
dump range.
Since each `.Self` is unique (can change its type if not its value) in a
facet type, having each one distinct by location also aids
understanding.
See
[here](https://docs.google.com/document/d/1rWcueFwIfZox6GKVGxiUG4cBzjrZ6djXiIDGyJDtrE4/edit?tab=t.0)
for the design doc.
This also removes the default value of the `result_type_inst_id`
parameter of `HandleAction`, moves it before the action in the parameter
list, and documents it. This solves two problems:
- The default made it easy to forget, leading to unnecessary
`TypeOfInst` instructions.
- When it was present, putting it after the fairly "bulky" action
argument tended to make the callsite harder to read.
When an initializing expression is used to initialize a var parameter,
we need to create the storage earlier in SemIR than the initializing
expression. To do so, pass a pending block to initialization containing
the var storage.
Also stop using `temporary` for this purpose, since we treat temporaries
as potentially-constant and immutable, but `var` parameters can be
mutated by the callee. We should ideally introduce a new kind of
instruction for this purpose but for now we just use `var_storage`.
- A function with a return declaration always has exactly one
`ReturnSlotPattern`, representing the whole return declaration (whereas
previously that was omitted for value and reference returns).
- The `ReturnSlotPattern` always has a subpattern with the same form.
`OutParamPattern` already plays that role for initializing forms, and
`TuplePattern` will play that role for tuple forms. This change
introduces `ValueReturnPattern` and `RefReturnPattern` to represent
value and reference return forms.
- As before, the `ReturnSlotPattern` has a corresponding `ReturnSlot`
that represents the output that is initialized by a `return` statement.
Its structure parallels the structure of the `ReturnSlotPattern`, so we
need `ValueReturn` and `RefReturn` insts that correspond to
`ValueReturnPattern` and `RefReturnPattern`.
This is a step toward supporting generic return forms, where the
`ReturnSlotPattern`'s subpattern may be an action: this change ensures
that evaluating the action for a specific form produces the same SemIR
as if the form were concrete to begin with. More speculatively, this
should simplify the implementation of `return` statements with compound
return forms.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
This is only fixing the decision about *whether* to produce a witness.
Implementation of the witness is still a TODO, though where a body is
generated, it should also precisely reflect where one _needs_ to be
generated.
Note the tests:
- toolchain/lower/testdata/function/generic/import_core_witness.carbon
- toolchain/lower/testdata/function/generic/import_unused_def.carbon
These tests can probably be produced _without_ Core.Destroy, but I found
the essence of them while trying to build //examples with Core.Destroy
and a simpler minimization wasn't striking me.
Assisted-by: Google Antigravity with Gemini
---------
Co-authored-by: jonmeow <jperkins@google.com>
Dana Jansens
Christopher Di Bella
Chandler Carruth
Geoff Romer
David Blaikie
Lucile Rose Nihlen
Richard Smith
Nicholas Bishop
Özgür T. ÖnsoyandDana Jansens
Jon Ross-Perkinsandjonmeow